journal article·2016-10

Development of medium-temperature composite phase change material with high thermal stability and conductivity

Zhuo Li, Zhi-Gen Wu

Publisher page

Abstract

Abstract This paper reports firstly a medium-temperature ternary PCM of nitrate salt, containing 68 wt% KNO 3 , 18 wt% LiNO 3 , 14 wt% Ca(NO 3 ) 2 in weight. To improve its thermal stability under high temperature and long term conditions, CsNO 3 of quite low percentage (0–0.6 wt%) was attempted to add into the ternary nitrate salt to obtain quandary salts (KNO 3 -LiNO 3 -Ca(NO 3 ) 2 -CsNO 3 ). The thermal properties and stabilities of the nitrate salts without/with CsNO 3 were then carefully measured and analyzed. The results show that a low percentage of CsNO 3 does not influence the melting point of 113.0 °C, but reduces the fusion heat slightly by around 9.3%. The addition of CsNO 3 essentially improves the thermal stability of salts at high temperature of 400 °C for long duration and the thermal cycling stability under (100–180 °C) for 800 cycles. Two composites with 5 wt% and 10 wt% expanded graphite (EG) combined with the nitrate salt, remarkably raise the thermal conductivity of PCM by more than 20 times and 30 times, respectively. The increase of EG particle with extremely high thermal conductivity not only enlarges the specific surface area but tends to build interconnected structures in the composite, thus enhances the effective thermal conductivity of the composite. The novel PCM we developed here shows suitable thermal properties and good thermal stability in long term that make the composite PCM potential in improving the heat performance of latent heat storage system in medium-temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. A review of solar thermal technologies10.1016/j.rser.2009.07.014 ↗
2. A review on global solar energy policy10.1016/j.rser.2011.01.007 ↗
3. Subsidies for electricity-generating technologies: a review10.1016/j.enpol.2010.04.031 ↗
4. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
5. Energy and exergy analysis of a latent heat storage system with phase change material for a solar collector10.1016/j.renene.2007.03.012 ↗
6. Preparation and characterization of nano-encapsulated n-tetradecane as phase change material for thermal energy storage10.1016/j.cej.2009.06.019 ↗
7. Review on phase change materials (PCMs) for cold thermal energy storage applications10.1016/j.apenergy.2012.03.058 ↗
8. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
9. Numerical study on the thermal behavior of phase change materials (PCMs) embedded in porous metal matrix10.1016/j.solener.2013.11.017 ↗
10. Analysis of HTFs, PCMs and fins effects on the thermal performance of shell-tube thermal energy storage units10.1016/j.solener.2015.09.019 ↗
11. Thermal storage by latent heat: a viable option for energy conservation in buildings10.1080/00908319308909014 ↗
12. A novel sebacic acid/expanded graphite composite phase change material for solar thermal medium-temperature applications10.1016/j.solener.2013.11.018 ↗
13. Latent heat storage above 120°C for applications in the industrial process heat sector and solar power generation10.1002/er.1346 ↗
14. Developments in organic solid-liquid phase change materials and their applications in thermal energy storage10.1016/j.enconman.2015.01.084 ↗
15. A review on energy conservation in building applications with thermal storage by latent heat using phase change materials10.1016/S0196-8904(03)00131-6 ↗
16. Relaxation of supercoiling of erythritol for latent heat storage10.1252/jcej.34.376 ↗
17. Thermophysical and heat transfer properties of phase change material candidate for waste heat transportation system10.1007/s00231-007-0311-2 ↗
18. Stability of sugar alcohols as PCM for thermal energy storage10.1016/j.solmat.2014.03.020 ↗
19. Thermal analysis of phase change materials in the temperature range 120–150°C10.1016/j.tca.2010.11.011 ↗
20. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
21. The preparation and properties of multi-component molten salts10.1016/j.apenergy.2009.06.022 ↗
22. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
23. Development of molten salt heat transfer fluid with low melting point and high thermal stability
24. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
25. Experimental and numerical study on the effective thermal conductivity of paraffin/expanded graphite composite10.1016/j.solmat.2014.06.023 ↗
26. Preparation, characterization and thermal properties of lauric acid/expanded perlite as novel formstable composite phase change material10.1016/j.cej.2009.09.005 ↗
27. Synthesis and characteristics of formstable n-octadecane/expanded graphite composite phase change materials10.1007/s00339-010-5724-y ↗
28. Thermal property measurement and heat transfer analysis of acetamide and acetamide/expanded graphite composite phase change material for solar heat storage10.1016/j.solmat.2011.03.031 ↗
29. Mixture law for viscosity10.1038/164799b0 ↗
30. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants10.1016/j.apenergy.2013.12.061 ↗
31. J.G. Yu, X.F. Song, H.Q. Pan, Molten salt mixture for LiNO3-KNO3-NaNO3-NaNO2 and its preparation, East China University of Science and Technology, CN 1263924A, 2000.