journal article·2016-12

Influence of laser repetition rate on the Cu2ZnSn(SSe)4 thin films synthesized via pulsed laser deposition technique

Sharadrao A. Vanalakar, Sawanta S. Mali, Ganesh L. Agwane, Arachana Kamble, In Y. Kim, Pramod S. Patil, Jin Y. Kim, Jin H. Kim

Publisher page

Abstract

Abstract Cu 2 ZnSn(SSe) 4 (CZTSSe) thin films are considered as a viable source for the future electricity generation using solar energy. In this report, CZTSSe thin films were synthesized by pulsed laser deposition (PLD) technique as a function of laser pulse repetition rate onto the Mo coated glass substrates. Structural, surface morphological, optical and electrical properties of CZTSSe thin films have been investigated by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and UV–vis spectroscopy. The XRD and Raman analysis confirmed the phase pure polycrystalline structure of thin films of CZTSSe synthesized at high pulse repetition rate. Moreover, the presence of the XRD peak at 27.72° corresponding to (112) plane reveals the tetragonal structure of CZTSSe. The band gap energy of synthesized CZTSSe thin films is found around 1.20 eV which is optimum for the solar energy harvesting. To the best of our knowledge, this is the first report on the deposition of CZTSSe via PLD technique by using different pulse repetition rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Cu2ZnSn(S,Se)4 solar cells from inks of heterogeneous Cu–Zn–Sn–S nanocrystals10.1016/j.solmat.2014.01.016 ↗
2. Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se10.1016/j.cap.2013.06.022 ↗
3. DFT calculations study of structural, electronic, and optical properties of Cu2ZnSn(S1−xSex)4 alloys10.1016/j.jallcom.2014.08.213 ↗
4. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
5. Morphological evolution and structural properties of Cu2ZnSn(S,Se)4 thin films deposited from single ceramic target by a one-step sputtering process and selenization without H2Se10.1016/j.jallcom.2015.04.103 ↗
6. A facile and low-cost synthesis of Cu2ZnSn(SxSe1−x)4 nanocrystals with tunable composition and optical band gap10.1016/j.matlet.2015.03.012 ↗
7. Single-step preparation and characterization of Cu2ZnSn(SxSe1−x)4 thin films deposited by pulsed laser deposition method10.1016/j.jallcom.2012.03.065 ↗
8. A review on pulsed laser deposited CZTS thin films for solar cell applications10.1016/j.jallcom.2014.09.018 ↗
9. Effect of post-annealing atmosphere on the grain-size and surface morphological properties of pulsed laser deposited CZTS thin films10.1016/j.ceramint.2014.06.121 ↗
10. Fabrication of Cu2SnS3 thin film solar cells using pulsed laser deposition technique10.1016/j.solmat.2015.02.031 ↗
11. Role of cluster transient mobility in pulsed laser deposition-type growth kinetics10.1103/PhysRevLett.98.036104 ↗
12. Development of CZTS thin films solar cells by pulsed laser deposition: Influence of pulse repetition rate10.1016/j.solener.2011.03.017 ↗
13. Role of pulse repetition rate in film growth of pulsed laser deposition10.1016/j.nimb.2007.10.011 ↗
14. Non-vacuum mechanochemical route to the synthesis of Cu2SnS3 nano-ink for solar cell applications10.1016/j.actamat.2014.11.043 ↗
15. Shin · Sol. Energy Mater. Sol. Cells · 2015 · 143 · 48010.1016/j.solmat.2015.07.023 ↗
16. Controlled substitution of S by Se in reactively sputtered CZTSSe thin films for solar cells10.1016/j.jallcom.2015.06.276 ↗
17. Properties of Cu2ZnSn(SxSe1−x)4 thin films prepared by one-step sulfo-selenization of alloyed metal precursors10.1016/j.cap.2014.04.005 ↗
18. Cu2ZnSn(S,Se)4 kesterite solar cell with 5.1% efficiency using spray pyrolysis of aqueous precursor solution followed by selenization10.1016/j.solmat.2014.01.029 ↗
19. A route to phase controllable Cu2ZnSn(S1−xSex)4 nanocrystals with tunable energy bands10.1038/srep02733 ↗
20. Characterization of vibrational and mechanical properties of quaternary compounds Cu2ZnSnS4 and Cu2ZnSnSe4 in kesterite and stannite structures10.1103/PhysRevB.84.205201 ↗
21. Influence of laser pulse energy on the microstructure and optical properties of Cu2ZnSnS4 films by one-step pulsed laser deposition10.1016/j.ceramint.2014.05.035 ↗
22. The constitution of mixed crystals
23. Hydrazine solution processed Sb2S3, Sb2Se3 and Sb2(S1−xSex)3 film: molecular precursor identification, film fabrication and band gap tuning
24. Anion distributions and phase transitions in CuS1−xSex (x=0–1) studied by Raman spectroscopy10.1006/jssc.1993.1242 ↗
25. XPS study of CZTSSe monograin powders10.1016/j.tsf.2010.12.165 ↗
26. Effects of S and Se contents on the physical and photovoltaic properties of Cu2ZnSn(SxSe1−x)4 nanoparticles10.1016/j.jallcom.2014.07.157 ↗
27. Structural, electronic and optical properties in earth-abundant photovoltaic absorber of Cu2ZnSnS4 and Cu2ZnSnSe4 from DFT calculations10.1016/S1452-3981(23)07770-2 ↗