An amorphous silicon random nanocone/polymer hybrid solar cell
Source abstract
Abstract
Abstract This paper proposes and experimentally demonstrates an a-Si:H random nanocone/PEDOT:PSS/P3HT:PCBM hybrid solar cell to extend the absorption to near infrared and solve the difficulty of carrier transport through organic–inorganic interface. The internal electrical field inside a-Si:H random nanocone force holes move to the anode and electrons move to the cathode. The insertion of a layer of PEDOT:PSS conducting polymer between organic–inorganic interface could cause electrons and holes to partially recombine, thus establishing an electrically connected a-Si:H and P3HT:PCBM bulk heterojunction, which enables carriers transport through organic–inorganic interfaces efficiently. As compared to conventional polymer solar cells, the open-circuit voltage of hybrid solar cells was increased from 0.51 to 0.78 V. Additionally, the power conversion efficiency was increased from 1.73% to 2.22%, which demonstrates approximately 28% enhancement, indicating that the hybrid structure could largely increase the efficiency of polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
2. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
3. Fabrication and processing of polymer solar cells—a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
5. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
6. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
7. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
8. Design of nanostructured heterojunction polymer photovoltaic devices10.1021/nl034810v ↗
9. Hybrid nanorod–polymer solar cells10.1126/science.1069156 ↗
10. Hybrid solar cells from regioregular polythiophene and ZnO nanoparticles10.1002/adfm.200500573 ↗
11. Poly(3-hexylthiophene): TiO2 nanocomposites for solar cell applications10.1088/0957-4484/15/9/008 ↗
12. Hybrid solar cell based on nanoparticles of CuInS2 in organic matrices10.1002/adfm.200390024 ↗
13. Hybrid solar cells from P3HT and silicon nanocrystals10.1021/nl8034338 ↗
14. Charge transport in hybrid nanorod–polymer composite photovoltaic cells10.1103/PhysRevB.67.115326 ↗
15. Effects of molecular interface modification in hybrid organic–inorganic photovoltaic cells10.1063/1.2737977 ↗
16. The effect of three-dimensional morphology on the efficiency if hybrid polymer solar cells10.1038/nmat2533 ↗
17. Efficient charge collection with ZnO nanorod array in hybrid photovoltaic devices10.1021/jp071418n ↗
18. Hybrid photovoltaic devices of polymer and ZnO nonofiber composites10.1016/j.tsf.2005.08.179 ↗
19. Optical absorption enhancement in amorphous silicon nanowire and nanocone arrays10.1021/nl802886y ↗
20. Numerical simulation on the photovoltaic behavior of an amorphous-silicon nanowire—array solar cell10.1109/LED.2009.2033318 ↗
21. Exciton harvesting, charge transfer, and charge-carrier transport in amorphous-silicon nanopillar/polymer hybrid solar cells10.1063/1.2896583 ↗
22. Arrangement of band structure for organic–inorganic photovoltaics embedded with silicon nanowire arrays grown on indium tin oxide glass10.1063/1.3189088 ↗
23. A modified block copolymer nano-patterning method for high density sub-30nm polystyrene nanosphere and gold nanomesh formation10.1166/nnl.2011.1156 ↗
24. Street · 1991