journal article·2013-10

Highly efficient PERC cells fabricated using the low cost laser ablation process

Myungsu Kim, Sungchan Park, Dongseop Kim

Publisher page

Abstract

Abstract Highly efficient passivated emitter and rear cells (PERC cells) were fabricated using low cost laser ablation (LA) for pilot production. The laser source for the LA system had a wavelength of 532 nm and pulse width of 20 ns. To minimize the damage created during the LA process, the laser power density was optimized at 2.8 J/cm 2 . Nevertheless, some damage occurred, such as dislocation and the formation of amorphous silicon, and was analyzed using energy-dispersive X-ray spectroscopy (EDS), Raman spectroscopy, and Sinton's quasi-steady-state photo-conductance (QSSPC). The measured laser damage depth was approximately 2.5 μm. Since the local contact depth (eutectic alloy+back surface field (BSF)) was over 10 μm when the cell fabrication was completed, this laser damage depth of 2.5 μm was not problematic. After optimizing the geometry of the local contacts, the measured efficiency of the laser-ablated PERC solar cell was 19.78%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Meemongkolkiat · 2008
2. Thermal oxidation for crystalline silicon solar cells exceeding 19% efficiency applying industrially feasible process technology10.1002/pip.814 ↗
3. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
4. Rear-surface passivation technology for crystalline silicon solar cells: a versatile process for mass production
5. P. Engelhart, D. Manger, B. Klöter, S. Hermann, A.A. Stekolnikov, S. Peters, H.-C. Ploigt, A. Eifler, C. Klenke, A. Mohr, G. Zimmermann, B. Barkenfelt, K. Suva, J. Wendt, T. Kaden, S. Rupp, D. Rychtarik, M. Fischer, J.W. Müller, P. Wawer, Q-cells next generation high-power silicon cell and module concept, in: Proceedings of the 26th EUPVSEC, 2011, 821 pp.
6. Thorsten, Dullweber Sebastian Gatz, Helge Hannebauer, Tom Falcon, Rene Hesse, Jan Schmidt, Rolf Brendel, Progress in Photovoltaics: Research and Applications, 26th EU PVSEC, vol. 20, 2012, 630 pp.10.1002/pip.1198 ↗
7. K. Neckermann, G. Andrä, M. Bähr, J. Lossen, E. Ose, L. Redlich, I. Köhler, H. Metzner, Local structuring of dielectric layers on silicon for improved solar cell metallisation, in: Proceedings of the 22nd EPSEC, 2007.
8. Laser ablation of SiO2 for locally contacted Si solar cells with ultra-short pulses10.1002/pip.758 ↗
9. Damage free laser ablation of SiO2 for local contact opening on silicon solar cells using an a-Si:H buffer layer10.1063/1.3309382 ↗
10. 19.4%-efficient large-area fully screen-printed silicon solar cells10.1002/pssr.201105045 ↗
11. Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells10.1002/pip.1198 ↗
12. Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics10.1063/1.1447555 ↗
13. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
14. Optical ablation by high-power short-pulse lasers10.1103/PhysRevLett.74.2248 ↗
15. Laser processing and chemistry: recent developments
16. Laser damage studies of silicon surfaces using ultra-short laser pulses
17. Laser-induced damage mechanisms in model optical materials10.1088/0022-3727/21/10S/024 ↗
18. Picosecond laser-induced melting and resolidification morphology on Si10.1063/1.90703 ↗
19. Femtosecond structural dynamics in VO2 during an ultrafast solid–solid phase transition10.1103/PhysRevLett.87.237401 ↗
20. Growth of spontaneous periodic surface structures on solids during laser illumination10.1103/PhysRevB.26.5366 ↗
21. Sekiguchi, K.Ta M., Device and circuit techniques for reducing variation in nanoscale SRAM, in: Proceedings of the IEEE VLSI Circuits, vol. 89, 2006.