journal article·2019-11

Energy harvesting performance of bifacial and semitransparent amorphous silicon thin-film solar cells with front and rear transparent conducting oxide contacts

Jun-Sik Cho, Yeong Hun Seo, Bo-Hun Choi, Ara Cho, Ahreum Lee, Min Jeong Shin, Kihwan Kim, Seung Kyu Ahn, Joo Hyung Park, Jinsu Yoo, Donghyeop Shin, Inyoung Jeong, Jihye Gwak

Publisher page

Abstract

Abstract Bifacial and semitransparent hydrogenated amorphous silicon (a-Si:H) thin-film solar cells were prepared with front and rear transparent conducting oxide (TCO) contacts using a plasma-enhanced chemical vapor deposition process. Increased power conversion efficiencies (PCEs) and average visible transmissions (AVTs) in the visible wavelength range were realized in the cases of the bifacial and semitransparent solar cells based on the optimization of the device designs, such as front TCO contacts, intrinsic a-Si:H absorbers (i-a-Si:H), p-type hydrogenated nanocrystalline silicon carbide, and n-type hydrogenated nanocrystalline silicon layers. The dependencies of the performance parameters of the solar cells on the illumination direction and intensity were also investigated systematically. As the film thickness of the i-a-Si:H absorber layers increased from 150 nm to 450 nm, the PCEs of the solar cells respectively increased in the ranges of 6.01–7.50% and 5.25–6.25% when front and rear illuminations were used for a standard light intensity of 100 mW/cm2, while the AVTs decreased from 22.76% to 15.67% irrespective of illumination direction. The best PCEs of the bifacial and semitransparent solar cells that were fabricated with the use of optimal conditions were respectively equal to 7.94% and 6.20% when front and rear illumination conditions were used. The corresponding AVT was equal to 14.34%. The performance parameters of bifacial and semitransparent a-Si:H solar cells at varying illumination intensities in the range of 10–100 mW/cm2 were also investigated, and yielded consistent PCE values in the range of 6.39–6.62% with front illumination, and 4.95–5.15% with rear illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Chalcogenide Semiconductor Thin Films · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Recent advancement in BIPV product technologies: a review10.1016/j.enbuild.2017.02.015 ↗
2. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency
3. Semi-transparent photovoltaics using ultra-thin Cu (In, Ga) Se2 absorber layers prepared by single-stage co-evaporation10.1016/j.solener.2019.02.003 ↗
4. Bifacial CIGS solar cells grown by low temperature pulsed electron deposition10.1016/j.solmat.2016.10.048 ↗
5. Emergence of highly transparent photovoltaics for distributed applications10.1038/s41560-017-0016-9 ↗
6. Aspects of bifacial cell efficiency10.1016/j.egypro.2017.09.334 ↗
7. Using hydrogen-doped In2O3 films as a transparent back contact in (Ag,Cu)(In,Ga)Se2 solar cells10.1002/pip.2977 ↗
8. Light absorption enhancement in ultra-thin Cu (In, Ga) Se2 solar cells by substituting the back-contact with a transparent conducting oxide based reflector10.1016/j.tsf.2016.10.006 ↗
9. Comprehensive review on material requirements, present status, and future prospects for building-integrated semitransparent photovoltaics (BISTPV)10.1039/C6TA01016D ↗
10. Progress and limitations of thin-film silicon solar cells10.1016/j.solener.2018.05.077 ↗
11. Building integrated photovoltaics (BIPV): review, potentials, barriers and myths
12. Comparing energy performance of different semi-transparent, building-integrated photovoltaic cells applied to “reference” buildings10.1016/j.egypro.2017.08.143 ↗
13. Highly transparent amorphous silicon solar cells fabricated using thin absorber and high-bandgap-energy n/i-interface layers10.1016/j.solmat.2014.05.041 ↗
14. Transparent bifacial a-Si:H solar cells employing silver oxide embedded transparent rear electrodes for improved transparency10.1016/j.solener.2018.05.096 ↗
15. Boron-doped hydrogenated silicon carbide alloys containing silicon nanocrystallites for highly efficient nanocrystalline silicon thin-film solar cells10.1002/pip.2605 ↗
16. Mechanism of an AZO-coated FTO film in improving the hydrogen plasma durability of transparent conducting oxide thin films for amorphous-silicon based tandem cells10.1039/c2jm15682b ↗
17. Fabrication of surface-textured ZnO : Al/ITO bilayers with enhanced electrical and light-scattering properties10.1016/j.solidstatesciences.2014.03.003 ↗
18. See-through amorphous silicon solar cells with selectively transparent and conducting photonic crystal back reflectors for building integrated photovoltaics10.1063/1.4833542 ↗
19. Amorphous silicon single-junction thin-film solar cell exceeding 10 % efficiency by design optimization10.1155/2012/460919 ↗
20. Microcrystalline silicon n-i-p solar cells prepared with microcrystalline silicon oxide (μc-SiOx:H) n-layer10.1002/pssc.200982830 ↗
21. Agbo · Energy Mater. Sol. Cells · 2017 · 159 · 42710.1016/j.solmat.2016.09.039 ↗