journal article·2016-12Open access

The competing roles of i-ZnO in Cu(In,Ga)Se2 solar cells

Benjamin L. Williams, Valerio Zardetto, Bas Kniknie, Marcel A. Verheijen, Wilhelmus M.M. Kessels, Mariadriana Creatore

Abstract

The electrical role of the highly resistive and transparent (HRT) i-ZnO layer in Cu(In, Ga)Se2(CIGS) solar cells is investigated. By tuning the resistivity of atomic layer deposited (ALD) i-ZnO through the use of post-growth O2-plasma treatments, it is shown that low i-ZnO carrier densities (i.e. high resistivities) actually restrict the performance of CIGS solar cells by reducing the extent of band-bending of the CdS/CIGS junction (the effect of series resistance is ruled out as the origin of any observed differences). This is the first evidence that i-ZnO has a negative electrical effect in CIGS solar cells (alongside the positive effect of shunt mitigation), and based on these results, attempts to maximise resistivity of the i-ZnO (typically sought-after for this HRT layer) are not recommended. Device efficiencies of 12.5% were obtained when using low resistivity as-grown ALD i-ZnO (resistivity, ρ=0.6 Ω cm, carrier density, n=3.5·1018 cm−3, and work function, Φ=4.06 eV), but this decreased to 11.5% when using high resistivity, plasma-treated ALD i-ZnO (ρ=134 Ω cm, n=0.2·1018 cm−3, and Φ=4.21 eV). SCAPS modelling revealed the reason for the difference to be the effect that the i-ZnO work function (controlled by carrier density) has on the band-bending and built-in voltage, Vbi, of the main junction. Capacitance-voltage experiments confirmed that the Vbi is lower (∆Vbi~0.1 V) when using low carrier density, high resistivity i-ZnO. This general effect was also found when using RF-sputtered i-ZnO, whereby the inclusion of high resistivity i-ZnO similarly generated lower efficiencies (15.0%) than low resistivity i-ZnO (15.9%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · ZnO doping and properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
2. Effects of the modified TCO sputtering condition on ZnS/CIGS solar cell10.1080/15421406.2013.851527 ↗
3. Above 16% efficient sequentially grown Cu(In,Ga)(Se,S)2-based solar cells with atomic layer deposited Zn(O,S) buffers10.1002/pip.2579 ↗
4. A comparative study of Cd- and Zn-compound buffer layers on Cu(In1−x,Gax)(Sy,Se1−y)2 thin film solar cells10.1002/pip.2695 ↗
5. MOCVD as a dry deposition method of ZnSe buffers for Cu(In,Ga)(S,Se)2 solar cells10.1002/pip.539 ↗
6. The Zn(S,O,OH)/ZnMgO buffer in thin-film Cu(In,Ga)(Se,S)2-based solar cells part II: Magnetron sputtering of the ZnMgO buffer layer for in-line co-evaporated Cu(In,Ga)Se2 solar cells10.1002/pip.897 ↗
7. Cd-free CIGS solar cells with buffer layer based on the In2S3 derivatives10.1039/c3cp50324k ↗
8. Identifying parasitic current pathways in CIGS solar cells by modelling dark J-V response10.1002/pip.2582 ↗
9. Improved performance of Cu(In,Ga)Se2-based submodules with a stacked structure of ZnO window prepared by sputtering10.1016/S0927-0248(02)00141-1 ↗
10. Fabrication of wide-gap Cu(In1−xGax)Se2 thin film solar cells: a study on the correlation of cell performance with highly resistive i-ZnO layer thickness10.1016/j.solmat.2004.08.017 ↗
11. Shunt mitigation in ZnO:Al/i-ZnO/CdS/Cu(In,Ga)Se2 solar modules by the i-ZnO/CdS buffer combination10.1002/pssa.201431496 ↗
12. On the role of non-doped ZnO in CIGSe solar cells10.1002/pip.1185 ↗
13. Effect of ZnO layer thickness on efficiency of Cu(In,Ga)Se2 thin-film solar cells10.1080/15421406.2012.692227 ↗
14. A.H. Jahagirdar, A.A. Kadam, N.G. Dhere, Role of i-ZnO in optimizing open circuit voltage of CIGS2 and CIGS thin film solar cells, in: Proceedings of the Conference Record of the 4th IEEE World Conference on Photovoltaic Energy Conversion, 2006, pp. 557–559.10.1109/WCPEC.2006.279516 ↗
15. Influence of heterointerfaces on the performance of Cu(In,Ga)Se2 solar cells with CdS and In(OHx,Sy) buffer layers10.1016/S0040-6090(03)00156-1 ↗
16. Characterisation of intrinsic ZnO thin film deposited by sputtering and its effects on CuIn1−xGaxSe2 solar cells10.1117/1.JPE.2.028502 ↗
17. Cu(In,Ga)Se2 thin-film solar cells with high resistivity ZnO buffer layers deposited by atomic layer deposition10.1143/JJAP.38.4989 ↗
18. Expanding thermal plasma chemical vapour deposition of ZnO:Al layers for solar cells10.1155/2014/253140 ↗
19. Point defects in ZnO: an approach from first principles10.1088/1468-6996/12/3/034302 ↗
20. Native point defects in ZnO10.1103/PhysRevB.76.165202 ↗
21. A brief review of atomic layer deposition: from fundamentals to applications10.1016/j.mattod.2014.04.026 ↗
22. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
23. Enhanced doping efficiency of Al-doped ZnO by atomic layer deposition using dimethylaluminum isopropoxide as an alternative aluminum precursor10.1021/cm402974j ↗
24. K.M. Guenther, T. Gimpel, W. Schade, S. Kontermann, Using impedance spectroscopy for enhanced capacitance-voltage measurements on solar cells with multiple space charge regions and a structured surface, in: Proceedings of the Conference Record of the 39th IEEE Photovoltaic Specialists Conference, 2013, pp. 956–959.10.1109/PVSC.2013.6744300 ↗
25. Blood P · 1992
26. Simulation of high efficiency CIGS solar cells with SCAPS-1D software10.1016/j.egypro.2015.07.809 ↗
27. Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
28. Numerical analysis of copper-indium-gallium-diselenide-based solar cells by SCAPS-1D
29. Anti-reflective silicon oxide p-layer for thin-film silicon solar cells
30. T. Unold, T. Enzenhofer, C.A. Kaufmann, R. Klenk, A. Neisser, K. Sakurai, H.W. Schock, Analysis of defects in coevaporated high-efficiency Cu(In,Ga)Se2 solar cells, in: Proceedings of the Conference Record of the 4th IEEE World Conference on Photovoltaic Energy Conversion, 2006, pp. 356–359.10.1109/WCPEC.2006.279463 ↗
31. S. Khelifi, J. Marlein, M. Burgelman, A. Belgachi. Electrical characteristics of Cu(In,Ga)Se2 thin films solar cells on metallic foil substrates. in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, 2008, pp. 2165–2169.
32. Capacitance profiling in the CIGS solar cells10.1016/j.tsf.2006.12.102 ↗
33. Characterization of CuInSe2 material and devices: comparison of thermal and electrochemically prepared absorber layers10.1088/0022-3727/41/8/085105 ↗
34. Uncovering the role of cathode buffer layer in organic solar cells10.1038/srep07803 ↗
35. Interpretation of thin-film polycrystalline solar cell capacitance10.1109/16.46377 ↗
36. Built-in potential and validity of the Mott-Schottky analysis in organic bulk heterojunction solar cells10.1103/PhysRevB.84.153201 ↗
37. Sensitivity of the Mott-Schottky analysis in organic solar cells10.1021/jp300397f ↗
38. Conduction-band-offset rule governing J-V distortion in CdS/CI(G)S solar cells10.1557/PROC-865-F5.32 ↗
39. A study on the band structure of ZnO/CdS heterojunction for CIGS solar-cell application10.5573/JSTS.2015.15.2.267 ↗
40. Secondary barriers in CdS-CuIn1−xGaxSe2 solar cells10.1063/1.1850604 ↗
41. Effect of ZnO buffer layer on AZO film properties and photovoltaic applications