journal article·2014-01

Efficiency and stability enhancement of laser-crystallized polycrystalline silicon thin-film solar cells by laser firing of the absorber contacts

M. Weizman, H. Rhein, J. Dore, S. Gall, C. Klimm, G. Andrä, C. Schultz, F. Fink, B. Rau, R. Schlatmann

Publisher page

Abstract

Abstract Polycrystalline silicon thin-film solar cells produced by continuous-wave diode-laser crystallization at the University of New South Wales were recently reported to have reached a conversion efficiency above 10%. One drawback of these cells, however, was that they exhibited efficiency degradation within several hours after the cell fabrication was completed. In this work we show that by applying laser firing to the rear point contacts of the solar cells, it is possible to stabilize and even to enhance the performance of these devices. Our investigation indicates that it is the poor quality of the contact between the aluminum and the silicon absorber that causes the cell degradation and offers an elegant and industrial-compatible process to improve the cell performance. This is the first time that the laser firing process, initially developed for alloying an aluminum layer through a dielectric layer on crystalline silicon wafer solar cells, is being applied to polycrystalline silicon thin-film solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Electron-beam crystallized large grained silicon solar cell on glass substrate10.1002/pip.1098 ↗
2. Thin-film polycrystalline silicon solar cells formed by diode laser crystallization10.1002/pip.2282 ↗
3. Performance potential of low-defect density silicon thin-film solar cells obtained by electron beam evaporation10.1051/epjpv/2012012 ↗
4. J. Dore, D. Ong, S. Varlamov, R. Egan, M.A. Green, Progress in laser-crystallized thin-film polycrystalline silicon solar cells: intermediate layers, light Trapping, and metallization, IEEE Journal of Photovoltaics, 10.1109/JPHOTOV.2013.2280016
5. Crystalline silicon on glass (CSG) thin-film solar cell modules10.1016/j.solener.2004.06.023 ↗
6. M. Keevers, T. Young, U. Schubert, M. Green, 10% efficient CSG minimodules, in: Proceedings of the 22nd EUPVSEC, Milan, Italy, 2007, pp. 1783–1790.
7. R. Egan, M. Keevers, U. Schubert, T. Young, R. Evans, S. Partlin, M. Wolf, J. Schneider, D. Hogg, B. Eggleston, M. Green, F. Falk, A. Gawlik, G. Andrä, M. Werner, C. Hagendorf, P. Dogan, T. Sontheimer, S. Gall, CSG minimodules using electron-beam evaporated silicon, in: Proceedings of the 24th EUPVSEC, Hamburg, Germany, 2009, pp. 2279–2285.
8. Polycrystalline silicon heterojunction thin-film solar cells on glass exhibiting 582mV open-circuit voltage10.1016/j.solmat.2013.03.013 ↗
9. Laser-fired rear contacts for crystalline silicon solar cells10.1002/pip.422 ↗
10. W. Shockley, Research and investigation of inverse epitaxial uhf power transistors, Report No AT TDR 64-207, 1964.
11. Solar cell contact resistance—a review10.1109/T-ED.1984.21583 ↗
12. Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts10.1016/j.apsusc.2011.09.108 ↗
13. Laser-fired contact optimization in c-Si solar cells10.1002/pip.1115 ↗