Growth and characterization of Cu2ZnSnSe4 thin films by a two-stage process
Source abstract
Abstract
Abstract Polycrystalline Cu 2 ZnSnSe 4 (CZTSe) thin films were prepared by a two-stage process namely thermal evaporation of stacked layers Cu/ZnSe/Sn/Se on soda-lime glass substrates held at different substrate temperatures ( T s ) in the range 523–723 K followed by annealing the stack in selenium atmosphere at 723 K for an hour. The effect of T s on the growth and properties of these films were analyzed by studying their structural, microstructural and optical properties. XRD studies revealed the structure to be kesterite with a =0.569 nm and c =1.139 nm. Raman spectroscopy is used as a complimentary tool to know the presence of possible secondary phases. The crystallinity of the films improved with increase in the substrate temperature. Spectral transmittance studies of these films revealed two optical transitions with direct band gaps of ∼1.0 eV and 1.4 eV which are attributed to CZTSe and CZTSe with minor ZnSe, as the annealed stack might be inhomogeneous.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
2. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
3. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
4. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
5. Growth and properties of stannite-quaternary Cu2ZnSnSe4 thin films prepared by selenization of sputtered binary compound precursors10.4028/www.scientific.net/AMR.29-30.79 ↗
6. Single step preparation of quaternary Cu2ZnSnSe4 thin films by RF magnetron sputtering from binary chalcogenide targets10.1016/j.jpcs.2007.05.022 ↗
7. Pulsed laser deposition of quaternary Cu2ZnSnSe4 thin films10.1002/pssa.200723144 ↗
8. T.M. Friedlmeier, N. Wieser, Th. Walter, H. Dittrich, H.W. Schock, Proceedings of 14th European PVSEC and Exhibition, P4B (1997) 10.
9. Effect of post-deposition annealing on the growth of Cu2ZnSnSe4 thin films for a solar cell absorber layer10.1088/0268-1242/23/8/085023 ↗
10. Determination of band gap energy (Eg) of Cu2ZnSnSe4 thin films: on the discrepancies of reported band gap values10.1063/1.3457172 ↗
11. Coevaporation of Cu2ZnSnSe4 thin films10.1063/1.3483760 ↗
12. Optical characterization of Cu2ZnSnSe4 grown by thermal co-evaporation10.1016/j.tsf.2011.01.142 ↗
13. Cu2ZnSnSe4 films by selenization of Sn–Zn–Cu sequential films10.1016/j.jpcs.2008.12.010 ↗
14. Morphological and structural characterization of Cu2ZnSnSe4 thin films grown by selenization of elemental precursor layers10.1016/j.tsf.2008.11.034 ↗
15. Cu2ZnSnSe4 thin film solar cells produced by selenisation of magnetron sputtered precursors10.1002/pip.886 ↗
16. Formation of thin films by selenization of electrodeposited stacked binary alloy layers10.1016/j.egypro.2010.07.012 ↗
17. Cu2ZnSnSe4 thin films prepared by selenization of co-electroplated Cu–Zn–Sn precursors10.1016/j.apsusc.2011.04.139 ↗
18. Cu2ZnSnSe4 absorbers Processed from solution deposited metal salt precursors under different selenization conditions10.1002/pssa.201228003 ↗
19. Cu2Zn1−xCdx·Sn(Se1−ySy)4 solid solutions as absorber materials for solar cells10.1002/pssa.200776839 ↗
20. Growth and characterization of co-evaporated Cu2ZnSnSe4 thin films for photovoltaic applications10.1088/0022-3727/41/20/205305 ↗
21. Effect of Cu/(Zn+Sn) ratio on the properties of co-evaporated Cu2ZnSnSe4 thin films10.1016/j.solmat.2009.09.005 ↗
22. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
23. A. Fairbrother, E. Saucedo, X. Fontane , V. Izquierdo-Roca, D. Sylla, M. Espindola-Rodriguez, F.A. Pulgarin-Agudelo, O. Vigil-Galan, A. Perez-Rodriguez, Preparation of 4.8% efficiency Cu2ZnSnSe4 based solar cell by a two step process, in: IEEE Conference (2011), pp. 2679–2684.
24. Low band gap liquid-processed CZTSe solar with 10.1% efficiency10.1039/c2ee00056c ↗
25. Structural aspects of adamantine like multinary chalcogenides10.1016/j.tsf.2006.12.100 ↗
26. Crystal and electronic band structure of Cu2ZnSnX4 (X=S and Se) photovoltaic absorbers: first-principles insights10.1063/1.3074499 ↗
27. Electronic and optical properties of Cu2ZnSnS4 and Cu2ZnSnSe410.1063/1.3318468 ↗
28. Detection of a ZnSe secondary phase in coevaporated Cu2ZnSnSe4 thin films10.1063/1.3558706 ↗
29. Marcano · Solid State Communications · 2011 · 151 · 8410.1016/j.ssc.2010.10.015 ↗
30. Lattice dynamics of CdS/ZnSe strained layer superlattices studied by Raman scattering10.1103/PhysRevB.64.245310 ↗
31. Optoelectronic properties of ZnSe thin films10.1016/j.mssp.2007.06.001 ↗
32. Temperature dependence of the optical properties of ZnSe films deposited on quartz substrate10.1007/s00339-005-3472-1 ↗
33. Synthesis, Optical and structural properties, and charge carrier dynamics of Cu-doped ZnSe nanocrystals10.1021/jp2047272 ↗
34. Pankove · 1971
35. Ternary and multinary Cu-chalcogenide photovoltaic materials from CuInSe2 to Cu2ZnSnS4 and other compounds10.1002/pip.2183 ↗
36. Predicted formation reactions for the solid-state syntheses of the semiconductor materials Cu2SnX3 and Cu2ZnSnX4 (X=S, Se) starting from binary chalcogenides10.1016/j.tsf.2006.12.096 ↗
37. Band structures of Cu2ZnSnS4 and Cu2ZnSnSe4 from many-body methods10.1063/1.3600060 ↗