Improvement of Cu(In,Ga)Se2 thin film solar cells by surface sulfurization using ditertiarybutylsulfide
Source abstract
Abstract
Abstract Surface sulfurization of Cu(In,Ga)Se 2 (CIGS) thin films was carried out using liquid ditertiarybutylsulfide [(t-C 4 H 9 ) 2 S: DTBS] to improve the performances of CIGS-based solar cells. The initial CIGS thin films were prepared by using the conventional three-stage co-evaporation process. Characterization by scanning electron microscopy, energy dispersive X-ray spectroscopy line scan, X-ray diffraction, and photoluminescence showed that the electrical and optical properties of the absorber layers were improved after sulfurization. The performances of the solar cells incorporating the CIGS films were remarkably improved when films sulfurized with DTBS were used. The efficiency of the solar cells fabricated with CIGS films increased significantly from 12.4% to 13.6% with an open-circuit voltage of 642 mV, short-circuit current density of 30.95 mA/cm 2 , and a fill factor of 68.2%. The improved cell performances can be attributed to the formation of a very thin sulfide layer on the CIGS layer and/or surface passivation by S atoms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
2. Improved Cu(In,Ga)Se2 thin film solar cells by surface sulfurization10.1016/S0927-0248(97)00054-8 ↗
3. Improved CIGS thin-film solar cells by surface sulfurization using In2S3 and sulfur vapor10.1016/S0927-0248(00)00290-7 ↗
4. Surface sulfurization studies of Cu(In,Ga)Se2 thin film10.1016/j.solmat.2005.04.037 ↗
5. Ga homogenization by simultaneous H2Se/H2S reaction of Cu–Ga–In precursor10.1016/j.solmat.2010.04.050 ↗
6. C.H. Huang, H.L. Cheng, Effects of sulfur incorporated into absorbers of CIGS solar cells studied by numerical analysis, in: Proceedings of the 12th International Numerical Simulation of Optoelectronic Devices Conference, Shanghai, 2012, pp. 117–118.10.1109/NUSOD.2012.6316545 ↗
7. Role of incorporated sulfur into the surface of Cu(InGa)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
8. K. Kushiya, M. Tachiyuki, T. Kase, Y. Nagoya, I. Sugiyama, O. Yamase, H. Takeshita, Bandgap control of large-area Cu(InGa)Se2 thin-film absorbers with Ga and S, in: Proceedings of the 2nd World Conference on Photovoltaic Energy Conversion, Vienna, Austria, 1998, pp. 424–427.
9. Origin of the deep center photoluminescence in CuGaSe2 and CuInS2 crystals10.1063/1.370739 ↗
10. Photoluminescence studies in CuInS2 thin films grown by sulfurization using ditertiarybutylsulfide10.1063/1.4771928 ↗
11. Photoluminescence study of deep levels in CuInS2 thin films grown by sulfurization using ditertiarybutylsulfide
12. T. Nakada, K. Matsumoto, M. Okumura, Improved efficiency of Cu(In,Ga)Se2 thin film solar cells by surface sulfurization using wet process, in: Proceedings of the Conference Record of the Twenty-Ninth IEEE, 19–24 May 2002, pp. 527–53010.1109/PVSC.2002.1190618 ↗
13. Dependence of the peak energy of the pair-photoluminescence band on excitation intensity10.1103/PhysRevB.6.3072 ↗
14. Photoluminescence study of defect levels in CuInS2 thin films grown by sulfurization using ditertiarybutylsulfide
15. Characterization of intrinsic defect levels in CuInS210.1002/(SICI)1521-396X(199902)171:2<511::AID-PSSA511>3.0.CO;2-B ↗
16. Impact of Na and S incorporation on the electronic transport mechanism of Cu(In,Ga)Se2 solar cells10.1016/S0038-1098(98)00154-9 ↗
17. Composition dependence of defect energies and band alignments in the Cu(In1−xGax)(Se1−ySy)2 alloy system10.1063/1.1432126 ↗
18. Investigation of defects in Cu(In,Ga)(S,Se)2 films using the photocurrent decay technique
19. Concerning lattice defects and defect levels in CuInSe2 and I–III–VI2 compounds10.1063/1.346523 ↗
20. U. Rau, M. Schmitt, D. Hiburger, F. Engelhardt, O. Seifert, J. Parisi, W. Riedel, J. Rimmasch, F. Karg, Influence of Na and S incorporation on the electronic transport properties of Cu(In,Ga)Se2 solar cells, in: Proceedings of the 25th IEEE Photovoltaic Specialists Conference, Washington DC, 1996, pp. 1005–1008.10.1109/PVSC.1996.564301 ↗
21. A comparative study of defect states in evaporated and selenized CIGS(S) solar cells10.1002/pip.619 ↗