Tapered aluminum-doped vertical zinc oxide nanorod arrays as light coupling layer for solar energy applications
Source abstract
Abstract
Abstract Tapered aluminum-doped vertical zinc oxide nanorod arrays have been prepared by using simple electrodeposition at 75 °C from an aqueous solution of zinc nitrate and aluminum nitrate. Two substrates were used, i.e., copper indium gallium (di)selenide solar cells and a solar thermal absorber. The resulting nanorod arrays were of high optical quality, indicting their applicability as a light coupling layer via a moth-eye effect by means of the subwavelength structure. The weighted global reflectance of the substrates’ surface is decreased after coating it with the light coupling layer. The coating layer boosts the solar cells’ short-circuit current without an obvious effect on their open-circuit voltage and changes the solar thermal absorber layer to a novel solar selective surface. The studies show that the aluminum-doped vertical zinc oxide nanorod arrays are an excellent light coupling element for both solar cell antireflective coating and solar thermal selective surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. A comprehensive review of ZnO materials and devices10.1063/1.1992666 ↗
2. Chopra · 1983
3. Comparison of TiO2 and other dielectric coatings for buried-contact solar cells: a review10.1002/pip.529 ↗
4. Overview on SiN surface passivation of crystalline silicon solar cells10.1016/S0927-0248(00)00099-4 ↗
5. Characterization and optimization of absorbing plasma-enhanced chemical vapor deposited antireflection coatings for silicon photovoltaics10.1364/AO.36.007826 ↗
6. Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells10.1002/pip.494 ↗
7. Theory and modeling of solar materials
8. Surfaces for selective absorption of solar energy: an annotated bibliography 1955–198110.1007/BF00540724 ↗
9. C.E. Kennedy, Review of Mid- to High-Temperature Solar Selective Absorber Materials, Technical Report of National Renewable Energy Laboratory 2002, NREL/TP-520-31267 〈http://www.nrel.gov/csp/troughnet/pdfs/31267.pdf〉
10. Barrera-Calva · Silica-Copper Oxide Composite Thin Films as Solar Selective Coatings Prepared by Dipping Sol Gel, Advances in Materials Science and Engineering · 2008 · 2008 · 190920(1)
11. Cobalt oxide films for solar selective surfaces, obtained by spray pyrolisis10.1016/j.solmat.2004.01.024 ↗
12. Synthesis of well-aligned ZnO nanorod arrays with high optical property via a low-temperature solution method10.1016/j.jcrysgro.2006.03.033 ↗
13. High temperature stability of postgrowth annealed transparent and conductive ZnO:Al films10.1063/1.2959071 ↗
14. Lux-Steiner, ZnO nanorod arrays as an antireflective coating for Cu(In,Ga)Se2 thin film solar cells10.1002/pip.946 ↗