journal article·2014-01

Effect of chemical treatments on nm-scale electrical characteristics of polycrystalline thin film Cu(In,Ga)Se2 surfaces

Wenjie Li, Sidney R. Cohen, David Cahen

Publisher page

Abstract

Conducting Probe AFM. CP-AFM, was used to follow how chemical etching, oxidation, and sulfurization affect the surface nanoscale electrical characteristics of polycrystalline Cu(In,Ga)Se2 (CIGS) thin films. Band bending at grain boundaries (GBs) on the surface was studied and analyzed by CP-AFM – measured photocurrents. We find that both oxidation and sulfurization can passivate the GBs of the CIGS films; oxidation increases n-type band bending, which impedes the transport of photogenerated electrons, while sulfurization increases p-type band bending at GBs, which helps this transport. Differences in effects between surface terminations by sulfide, selenide and oxide were analyzed. The effects of these treatments on the electrical activity of the GBs of the films, as well as the importance of the use of chemical bath deposition of the CdS buffer, are explained within a defect surface chemistry model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Oxygenation and air-annealing effects on the electronic properties of Cu(In,Ga)Se2 films and devices10.1063/1.370758 ↗
2. Two step wet surface treatment influence on the electronic properties of Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2008.11.036 ↗
3. n-CuInSe2-based photoelectrochemical cells: improved, stable performance in aqueous polyiodide through rational surface and solution modifications10.1063/1.95384 ↗
4. Surface Treatment of Cu(In,Ga)Se2 Thin Films and Its Effect on the Photovoltaic Properties of Solar Cells10.1016/S0022-3697(03)00169-0 ↗
5. Zweibel · 1990 · vol. 6 · 485
6. Effect of air annealing on the band structure of the polycrystalline CdS/Cu(In,Ga)Se2 photovoltaic cell10.1016/0927-0248(95)00167-0 ↗
7. High-efficiency CIGS solar cells with modified CIGS surface10.1016/S0927-0248(00)00296-8 ↗
8. Improved Cu(ln,Ga)(S,Se)2 thin film solar cells by surface sulfurization10.1016/S0927-0248(97)00054-8 ↗
9. T. Nakada, K. Matsumoto, M. Okumura, Improved efficiency of Cu(ln,Ga)S2 thin film solar cells by surface sulfurization using a wet process, in: Photovoltaic Specialists Conference, Conference Record of the Twenty-Ninth IEEE (2002) pp. 527–530.
10. Effect of Na on CuInSe2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
11. Defect chemical explanation for effect of air anneal on CdS/CuInSe2 solar cell performance10.1063/1.100930 ↗
12. Structural and chemical investigations of CBD- and PVD-CdS buffer layers and interface in Cu(In,Ga)Se2-based thin film solar cells10.1016/j.tsf.2004.11.033 ↗
13. Development of thin-film Cu(In,Ga)Se2 and CdTe solar cells10.1002/pip.527 ↗
14. n-CuInSe2/polysulfide photoelectrochemical Solar Cells10.1063/1.93206 ↗
15. Annealing effects on individual loss mechanisms in CuInSe2 solar cells10.1016/0379-6787(91)90042-N ↗
16. the beneficial role of grain boundaries in polycrystalline solar cells, from Single Grain Boundary scanning microscopies10.1002/adfm.200500396 ↗
17. Ga composition dictates macroscopic photovoltaic and nanoscopic electrical characteristics of Cu(InGa)Se2 thin films via grain-boundary-type inversion10.1109/JPHOTOV.2012.2184266 ↗
18. Current routes in polycrystalline CuInSe2 and Cu(In,Ga)Se2 films10.1016/j.solmat.2006.08.006 ↗
19. Microscopic evidence for the modification of the electronic structure at grain boundaries of Cu(In1−x,Gax)Se2 films10.1103/PhysRevLett.108.076603 ↗
20. CIGS absorbers and processes10.1002/pip.969 ↗
21. Direct evidence for grain boundary depletion in polycrystalline CdTe from nano-scale resolved measurements10.1063/1.1542926 ↗
22. Local build-in potential on grain boundary of Cu(In,Ga)Se2 thin film10.1063/1.1737796 ↗
23. Kelvin probe force microscopy for the nanoscale characterization of chalcopyrite solar cell materials and devices10.1016/S0040-6090(03)00267-0 ↗
24. Nanometer-scale electronic and microstructural properties of grain boundaries in Cu(In,Ga)Se210.1016/j.tsf.2010.12.227 ↗
25. How grain boundaries in Cu(In,Ga)Se2 thin films are charged: Revisit10.1063/1.4737406 ↗
26. Surface passivation of polycrystalline chalcogenide based photovoltaic cells10.1016/0379-6787(91)90037-P ↗
27. Depth profiling of Cu(In,Ga)Se2 thin films grown at low temperatures10.1016/j.solmat.2008.10.009 ↗
28. Cu defficiency in multi-stage co-evaporated Cu(In.Ga)Se2 for solar cells applications: Microstructure and Ga in-depth alloying10.1016/j.actamat.2010.02.021 ↗
29. Transfer of Cu(In,Ga)Se2 thin film solar cells to flexible substrates, using an in situ process control10.1016/j.tsf.2004.11.067 ↗
30. Effects of Chemical and Electrochemical Etching on Polycrystalline Thin Films of CuGaSe210.1007/BF02657784 ↗
31. Surface characterization of chemically treated Cu(In,Ga)Se2 thin films10.1143/JJAP.35.4760 ↗
32. The chemical bath deposited CdS/Cu(In,Ga)Se2 interface as revealed by X-Ray photoelectron spectroscopy10.1149/1.1391849 ↗
33. Anomalous grain boundary physics in polycrystalline CunSe2: the existence of a hole barrier
34. Chalcopyrite/defect chalcopyrite heterojunctions on the basis of CulnSe210.1063/1.353020 ↗
35. Role of surface band gap widening in Cu(In, Ga)(Se, S)2 thin-films for the photovoltaic performance of ZnO/CdS/Cu(In, Ga)(Se, S)2 heterojunction solar cells, in Compound Semiconductor Photovoltaics10.1557/PROC-763-B8.8 ↗
36. Interface redox engineering of Cu(In,Ga)Se2-based Solar cells: oxygen, sodium, and chemical bath effects10.1016/S0040-6090(99)00768-3 ↗