Effect of basicity of glass frits on electrical properties of Si solar cells
Source abstract
Abstract
Abstract The purpose of this study is to understand the effects of the basicity parameter of glass frits added to the front contact of three-busbar Si solar cells on the removal of the anti-reflective coating (ARC) and the electrical characteristics of the cell. We investigated PbO-TeO2-SiO2 glass systems by adding oxides to improve the etching of the interface between the Ag electrode and the Si wafer. The thermal properties and viscous flows of the frits were characterized using differential thermal analysis and a hot-stage microscope. The microstructure of the glass layer at the interface of the Ag electrode and Si wafer was observed using scanning electron microscopy and transmission electron microscopy. The results showed that the electrical properties were dependent on the morphology of the interfacial structure. The addition of oxides to the glass system produced more recrystallites on the n+ emitter with a greater penetration depth in the Si wafer, thereby increasing the efficiency of the solar cell. The reactivity of the glass affected the removal of the ARC and the electrical properties of the Si solar cells were influenced by the charge transport facilitated by the Ag crystallites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
2. Efficiency enhancement of ZnO/Cu2O solar cells with well oriented and micrometer grain sized Cu2O films10.1063/1.5017002 ↗
3. Thick-film metallization for solar cell applications10.1109/T-ED.1984.21575 ↗
4. Ag-based thick-film front metallization of silicon solar cells10.1155/1989/27954 ↗
5. Industrial silicon wafer solar cells
6. Physical understanding of printed thick-film front contacts of crystalline Si solar cells–Review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
7. Experimental evidence of direct contact formation for the current transport in silver thick film metalized silicon emitters10.1063/1.3665718 ↗
8. M. Eberstein, S. Körner, High performance front side pastes by Ag precursor equipped glasses, Photovoltaic Specialist Conference (PVSC) 42nd IEEE, IEEE 14-19 June, New Orleans, LA, 2015.10.1109/PVSC.2015.7355928 ↗
9. Silver thick-film contacts on highly doped n-type silicon emitters: structural and electronic properties of the interface10.1063/1.1562338 ↗
10. Investigation of Ag-bulk/glassy-phase/Si heterostructures of printed Ag contacts on crystalline Si solar cells10.1016/j.solmat.2008.02.032 ↗
11. Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating10.1002/pip.855 ↗
12. Microstructural comparison of silicon solar cells' front-side Ag contact and the evolution of current conduction mechanisms10.1063/1.3642956 ↗
13. Effects of current-injection firing with Ag paste in a boron emitter10.1038/srep21553 ↗
14. Screen-printable silver pastes with nanosized glass frits for silicon solar cells10.1007/s11664-012-2378-x ↗
15. Effect of the thermal properties of frits on the electrical properties of screen-printed silicon solar cells10.3938/jkps.55.1046 ↗
16. Thermal properties of glass frit and effects on Si solar cells10.1016/j.matchemphys.2008.09.011 ↗
17. Influence of tellurite glass on reaction between Si3N4 anti-reflection coating film and Ag paste for electrodes in Si solar cells10.2109/jcersj2.15241 ↗
18. Role of phosphorus in contact formation on silicon solar cells10.1002/pssr.201206298 ↗
19. Impact of excess phosphorus doping and Si crystalline defects on Ag crystallite nucleation and growth in silver screen-printed Si solar cells10.1002/pip.2440 ↗
20. Compositional dependence of absorption spectra of Ti3+ in silicate, borate, and phosphate glasses10.1111/j.1151-2916.1994.tb04557.x ↗
21. Influence of glass basicity on rodex interactions of iron–manganese–copper ion pairs in soda–lime–silica glass10.1134/S1087659608010033 ↗
22. Effect of the Pb–Te–B–O system glass frits in the front contact paste on the conversion efficiency of crystalline silicon solar cells10.1007/s10854-014-2089-6 ↗
23. Study on the sintering and contact formation process of silver front side metallization pastes for crystalline silicon solar cells10.1016/j.apsusc.2016.03.089 ↗
24. Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells10.1016/j.solmat.2008.10.021 ↗
25. Reactions and phases within the TeO2-rich part of the Bi2O3-TeO2 system10.1023/B:JTAN.0000005171.10048.c9 ↗
26. Effect of bismate frits under fast firing on reactions between Ag electrodes and Si wafer for Si solar cells10.1111/jace.12135 ↗
27. Effect of Pb–Te–O glasses on Ag thick-film contact in crystalline silicon solar cells10.1016/j.solmat.2015.08.025 ↗
28. Experimental evidence of direct contact formation for the current transport in silver thick film metallized silicon emitters10.1063/1.3665718 ↗
29. High-efficiency crystalline-Si solar cells with screen-printed front-side metallization: a percolation model to explain the current path10.1007/s11664-016-4818-5 ↗
30. Impact of boron doping profiles on the specific contact resistance of screen printed Ag–Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
31. Influence of surface near doping concentration on contact formation of silver thick film contacts10.1016/j.solmat.2016.03.030 ↗