journal article·2017-04

Study of surface sulfurization of Cu2ZnSn(S, Se)4 thin film solar cell by sequential H2Se-selenization/H2S-sulfurization

Kai-Cheng Wang, Hung-Ru Hsu, Hsueh-Shih Chen

Publisher page

Abstract

Abstract Effect of surface sulfurization on the solar conversion efficiency of Cu-Zn-Sn (CZT) alloy film, which was prepared by DC-magnetron sputtering with a single Cu-Zn-Sn target, followed by a H2S-sulfurization-after-H2Se-selenization (SAS) process to convert the alloy film to a Cu2ZnSn(S, Se)4 (CZTSSe) absorber, was investigated. Compared with a conventional Cu2ZnSnSe4 (CZTSe) solar cell selenized in H2Se, the conversion efficiency of CZTSSe one prepared in the SAS process was increased from 2.1% to 7.5% (increased by 257%). Conductive atomic force microscopy exhibited that the SAS process effectively reduced the leakage current near the grain boundary, while the external quantum efficiency measurement clearly demonstrated that the SAS process increased the energy bandgap by ~0.13 eV and significantly reduced the surface defects in the shorter wavelength region. Raman and temperature-dependent photoluminescence spectroscopies elucidated that the SAS process also led to secondary phases (e.g., SnS, ZnS and Cu2SnS3) and structural defects (e.g., ZnSn), which are considered to be a key to achieve a highly efficient CZTSSe solar cell in the future.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
2. Device characteristics of a 10.1% hydrazine‐processed Cu2ZnSn(Se, S)4 solar cell10.1002/pip.1160 ↗
3. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
5. New world record efficiency for Cu(In, Ga)Se2 thin‐film solar cells beyond 20%10.1002/pip.1078 ↗
6. Compositional investigation of potassium doped Cu(In, Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
7. V. Chawla, B. Clemens, Effect of composition on high efficiency CZTSSe devices fabricated using co-sputtering of compound targets, in: Proceedings of the Photovoltaic Specialists Conference (PVSC) 38th IEEE, IEEE, 2012, pp. 002990–002992, 2012.
8. Growth and characterization of Cu2ZnSn(S, Se)4 thin films for solar cells10.1016/j.solmat.2012.02.031 ↗
9. Cu2ZnSn(S, Se)4 solar cells processed by rapid thermal processing of stacked elemental layer precursors10.1016/j.tsf.2012.10.042 ↗
10. Fabrication of pentanary Cu(In, Ga)(Se, S)2 absorbers by selenization and sulfurization10.1016/j.solmat.2009.02.004 ↗
11. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
12. Toward low-cost large-area CIGS thin film: compositional and structural variations in sequentially electrodeposited CIGS thin films10.1016/j.solener.2015.12.007 ↗
13. Toward low-cost large-area CIGS thin film II: out-of-plane compositional variations of sequentially electrodeposited Cu/In/Cu/Ga/Cu stacked layers selenized in rapid thermal process10.1016/j.solener.2016.01.040 ↗
14. Toward low-cost large-area CIGS thin film III: effect of Se concentration on crystal growth and defect formation of sequentially electrodeposited CIGS thin films10.1016/j.solener.2016.03.029 ↗
15. Morphological and structural characterization of Cu2ZnSnSe4 thin films grown by selenization of elemental precursor layers10.1016/j.tsf.2008.11.034 ↗
16. Characterization of vibrational and mechanical properties of quaternary compounds Cu2ZnSnS4 and Cu2ZnSnSe4 in kesterite and stannite structures10.1103/PhysRevB.84.205201 ↗
17. Effect of selenization time on the growth of Cu2ZnSnSe4 thin films obtained from rapid thermal processing of stacked metallic layers10.1016/j.matlet.2014.04.001 ↗
18. Temperature dependence of the optical properties of ZnSe films deposited on quartz substrate10.1007/s00339-005-3472-1 ↗
19. Photoluminescence and Raman study of Cu2ZnSn(SexS1−x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
20. Imaging and phase identification of Cu2ZnSnS4 thin films using confocal Raman spectroscopy10.1116/1.3625249 ↗
21. 9.0% efficient Cu2ZnSn(S, Se)4 solar cells from selenized nanoparticle inks10.1002/pip.2472 ↗
22. Investigation of local electronic transport and surface potential distribution of Cu(In, Ga)Se2 thin-films10.1016/j.cap.2012.03.016 ↗
23. Current routes in polycrystalline CuInSe2 and Cu(In, Ga)Se2 films10.1016/j.solmat.2006.08.006 ↗
24. Nanoscale observation of surface potential and carrier transport in Cu2ZnSn(S, Se)4 thin films grown by sputtering-based two-step process10.1186/1556-276X-9-10 ↗
25. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
26. Electrical characterization of grain boundaries of CZTS thin films using conductive atomic force microscopy techniques10.1016/j.materresbull.2015.05.002 ↗
27. Role of incorporated sulfur into the surface of Cu(In, Ga)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
28. Interface control to enhance the fill factor over 0.70 in a large-area CIS-based thin-film PV technology10.1016/j.tsf.2008.10.125 ↗
29. Cu2ZnSnSe4 thin film solar cells produced by selenisation of magnetron sputtered precursors10.1002/pip.886 ↗
30. Prospects and performance limitations for Cu–Zn–Sn–S–Se photovoltaic technology10.1098/rsta.2011.0432 ↗
31. The role of structural properties on deep defect states in Cu2ZnSnS4 studied by photoluminescence spectroscopy10.1063/1.4750249 ↗
32. A study of energy band gap versus temperature for Cu2ZnSnS4 thin films10.1016/j.physb.2011.09.134 ↗
33. Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In, Ga)Se2 thin films used in photovoltaic applications10.1103/PhysRevB.84.165324 ↗
34. Intrinsic point defects and complexes in the quaternary kesterite semiconductor Cu2ZnSnS410.1103/PhysRevB.81.245204 ↗
35. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS410.1063/1.3275796 ↗