journal article·2017-02

Solution processed cathode and interconnecting layer of silver nanowires in an efficient inverted tandem organic solar cells

Mahfoudh Raïssi, Sylvain Vedraine, Richard Garuz, Thierry Trigaud, Bernard Ratier

Publisher page

Abstract

Due to the potential of achieving high conductivity and high transparency, low-cost, large-area and flexibility for versatile applications as organic solar cells, silver nanowires (AgNWs) have attracted great attention as a good alternative to conventional ITO. However, design and production of conducting transparent film and interconnecting layers plays a very important role to achieve a high device performance. We discuss the benefit of the AgNWs inserted in the organic tandem solar cell devices as transparent electrode (TE) and as interconnecting layer (ICL) between the two subcells having actives layers with complementary absorption and made of poly(3-hexylthiophene):indene-C60 bisadduct and polythieno [3,4-b]thiophene/benzodithiophene: phenyl-C71-butyric acid methyl ester. ZnO nanoparticles have been used as interfacial layer in the ICL and lead to a decrease of the AgNWs roughness. The tandem cells on AgNWs show a good efficiency (PCE=9.23%), a short circuit current density of 11.23 mA/cm2 close to the lower short circuit current of the two solar subcells, and an open circuit voltage (Voc=1.47 V) matching the sum of the two subcells Voc. This suggests that the ICL provides a good carrier injection through the interfacial layer and an efficient recombination of the current coming from each subcells. Moreover, optical modeling is done in order to calculate the optimized active layers thicknesses and short term stability in open air evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Photoinduced electron transfer from conducting polymer to buckministerfullerene10.1126/science.258.5087.1474 ↗
2. Probing individal subcells of fully printed and coated polymer tandem solar cells using multichromatic opto-electronic characterization methods10.1016/j.solmat.2015.01.030 ↗
3. Polymer homo-tandem solar cells with best efficiency of 11.3%10.1002/adma.201404220 ↗
4. Manipulating regioregular poly (3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester blends – route towards high efficiency polymersolar cells10.1039/b703075b ↗
5. A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%10.1039/C4EE03048F ↗
6. Effect of inorganic acid in DBSA-PANI polymerization on transparent PANI-SiO2 hybrid conducting films10.1016/j.jallcom.2010.04.094 ↗
7. Optical properties of highly conductive and transparent Au-incorporated Eu oxide thin films10.1016/j.jallcom.2008.02.101 ↗
8. Preparation of electrically conductive nano–powder of zinc oxide and application to transparent film coating10.1016/j.jallcom.2008.10.049 ↗
9. Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays10.1016/j.tsf.2004.01.052 ↗
10. Environment and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
11. Efficiency enhancement in organic photovoltaic cells, consequences of optimizing series resistances10.1002/adfm.200901107 ↗
12. Facchetti · 2010
13. Polymer solar cells: ultraflexible polymer solar cells using amorphous zinc-indium-tin oxide transparent electrodes10.1002/adma.201302303 ↗
14. Transparent indium zinc oxide top cathode prepared by plasma damage-free sputtering for top-emitting organic light-emitting diodes10.1063/1.2159577 ↗
15. Nano-sized Ag-inserted amorphous ZnSnO3 multilayer electrodes for cost-efficient10.1016/j.solmat.2011.01.013 ↗
16. Dependence of electrical, optical, and structural properties on the thickness of IZTO thin films grown by linear facing target sputtering for organic solar cell10.1016/j.solmat.2010.05.056 ↗
17. Transparent and flexible amorphous In-Si-O films for flexible organic solar cells10.1063/1.4788687 ↗
18. Printable anodes for flexible organic solar cell modules
19. Mechanical flexibility of transparent PEDOT:pss electrodes prepared by gravure printing for flexible organics solar cells10.1016/j.solmat.2011.07.009 ↗
20. Highly conductivity of PEDOT:pss electrode with optimized solvent and thermal Post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
21. Electronically monodisperse single-walled carbon nanotube thin films as transparent conducting anodes in organic photovoltaic devices10.1002/aenm.201100274 ↗
22. Organic photovoltaic devices using highly flexible reduced gra phene oxide films as transparent electrodes10.1021/nn1015874 ↗
23. Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics10.1021/nn901587x ↗
24. Espinosa · Adv. Eng. Mater. · 2016
25. High efficiency hole extraction /electron-blocking layer to replace poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) in bulk-heterojunction polymer solar cells10.1063/1.2834697 ↗
26. Solution –processed flexible polymer solar cells with silver nanowire electrodes10.1021/am2009585 ↗
27. Efficient organic solar cells with processed silver nanowire electrodes10.1002/adma.201100871 ↗
28. Highly efficient and bendable organic solar cells with solution-processed silver nanowire electrodes
29. Sliver nanowire-polymer Composite electrodes for efficient polymer solar cells10.1002/adma.201101992 ↗
30. Plasmonic Ag nanowire network embedded in zinc oxide nanoparticles for inverted organic solar cells electrode10.1016/j.solmat.2016.03.021 ↗
31. Scalable coating and properties of transparent, flexible, silver nanowire electrodes10.1021/nn1005232 ↗
32. Silver nanowire-polymer composite electrodes for efficient polymer solar cells10.1002/adma.201101992 ↗
33. Highly efficient and bendable organic solar cells with solution-processed silver nanowire electrodes10.1002/adfm.201202646 ↗
34. A new transparent conductor: silver nanowire film buried at the surface of a transparent polymer10.1002/adma.201001811 ↗
35. Smooth nanowire/polymer composite transparent electrodes10.1002/adma.201100566 ↗
36. A polymer tandem solar cells with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
37. Polymer solar cells with enhanced fill factor10.1038/nphoton.2013.207 ↗
38. enhanced power-conversion effeciency in polymer solar cells using an inversted device structure10.1038/nphoton.2012.190 ↗
39. The role of N-doped Multiwall carbon nanotubes in achieving highly efficient polymer bulk heterojunction solar cells10.1021/nl304533j ↗
40. Enhanced efficiency of single and tandem organic solar cells incorporating a diketopyrrolopyrrole-based low bandgap polymer by utilizing combined ZnO/polyelectrolyte electron transport layers10.1002/adma.201301288 ↗
41. Highly efficient tandem polymer photovoltaic cells10.1002/adma.200901624 ↗
42. A robust inter-connecting layer for achieving high performance tandem polymer solar cells10.1002/adma.201100221 ↗
43. A metal-oxide interconnection layer for polymer tandem solar cells with an inverted architecture10.1002/adma.201001033 ↗
44. Optimizing polymer tandem solar cells10.1002/adma.200902398 ↗
45. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
46. Systematic investigation of benzodithiophene- and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells10.1021/ja301460s ↗
47. Recent trends in polymer solar cells research10.1016/j.progpolymsci.2013.04.005 ↗
48. Solvent-polarity-induced active layer morphology control in crystalline diketopyrrolopyrrole-based low band gap polymer photovoltaics10.1002/aenm.201300834 ↗
49. Nanoscale control of the network morphology of high effeciency polymer fullerene solar cells by the use of hight material concentration in the liquid phase10.1088/0957-4484/21/3/035201 ↗
50. Accurate efficiency determination and stability studies of conjugated polymer fullerene solar cells10.1016/S0040-6090(01)01589-9 ↗
51. Handbook of optical constants of solids
52. Optical properties of Al-doped ZnO thin films by ellipsometry10.1016/j.apsusc.2007.09.104 ↗
53. Effect of the thickness of the MoO3 layers on optical properties of MoO3/Ag/MoO3 multilayer structures10.1063/1.4751334 ↗
54. An efficient triple junction polymer solar cell having a power conversion efficiency exceeding10.1002/adma.201402072 ↗
55. Highly stable and flexible silver nanowire–graphenehybrid transparent conducting electrodes for emerging optoelectronic devices10.1039/c3nr02320f ↗
56. Silver nanowires binding with sputtered ZnO to fabricate highly conductive and thermally stable transparent electrode for solar cell applications10.1021/acsami.6b01506 ↗
57. Solution-processed highly conductive PEDOT:PSS/AgNW/GO transparent film for efficient organic-Si hybrid solar cells10.1021/am508006q ↗
58. Solution-processed metal nanowire mesh transparent electrodes10.1021/nl073296g ↗
59. Highly transparent low resistance ZnO/Ag nanowire/ZnO composite electrode for thin film solar cells10.1021/nn305491x ↗
60. Molecular weight effect on the efficiency of polymer solar cells10.1021/am404157t ↗
61. Optimized ITO-free tri-layer electrode for organic solar cells10.1016/j.orgel.2013.01.030 ↗
62. Numerical optimization of multilayer electrodes without indium for use in organic solar cells10.1016/j.solmat.2013.12.026 ↗
63. High photovoltage multiple-heterojunction organic solar cells incorporating interfacial metallic nanoclusters10.1063/1.1457531 ↗
64. Efficient photon harvesting at high optical intensities in ultrathin organic double-heterostructure photovoltaic diodes10.1063/1.126433 ↗
65. Asymmetric tandem organic photovoltaic cells with hybrid planar-mixed molecular heterojunctions10.1063/1.1829776 ↗
66. General transfer-matrix method for optical multilmayer system with coherent, partially coherent and incoherent interference10.1364/AO.41.003978 ↗
67. Intermediate layers in tandem organic solar cells
68. Enhancement of recombination process using silver and graphene quantum dot embedded intermediate layer for efficient organic tandem cells10.1038/srep30327 ↗
69. Device operation of organic tandem solar cells10.1016/j.orgel.2008.03.009 ↗
70. Interlaboratory outdoor stability studies of flexible roll-to-rollcoated organic photovoltaic modules: stability over10,000h10.1016/j.solmat.2013.04.024 ↗
71. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes