A low-cost, sulfurization free approach to control optical and electronic properties of Cu2ZnSnS4 via precursor variation
Source abstract
Abstract
Thin films of Cu2ZnSnS4 (CZTS) were synthesized via a low cost, wet chemical technique of chemical bath deposition (CBD). In the first part of this study, the chemical composition ratio S/(Cu+Zn+Sn) was varied keeping Cu/(Zn + Sn) and Zn/Sn ratios constant to study the effect of sulfur variation. Detailed electrical and optical characterization has been carried out using UV-visible spectroscopy, x-ray diffraction, x-ray photoelectron spectroscopy, Raman spectroscopy and Kelvin probe force microscopy (KPFM) techniques. The results of the present study confirm that near ideal stoichiometry could be achieved in CZTS by adding excess thiourea in a controlled manner which eliminated the need for an additional step of sulfurization. Using the stoichiometric sample as the basis, in the second part of the study Cu/(Zn+Sn) and Zn/Sn was varied and it was found that the electronic properties of CZTS in terms of band gap, work function and valence band edge position could be controlled by precursor variation. KPFM was used to qualitatively evaluate the photoresponse of the films and the Cu-poor, Zn-rich samples showed the best photoresponse out of all the samples which has been attributed to a decrease in the CuZn type defects. The study thus demonstrates a scalable and low-cost technique to grow CZTS absorber layers for solar cells with control over its electronic properties which is important for effective device operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Kesterites - a challenging material for solar cells10.1002/pip.2156 ↗
2. The Current Status and Future prospects of Kesterite Solar Cells: A Brief Review10.1002/pip.2741 ↗
3. Electrical and optical properties of Cu2ZnSnS4 thin films prepared by rf magnetron sputtering process10.1016/S0927-0248(02)00127-7 ↗
4. Optimized fabrication of sputter deposited Cu2ZnSnS4 (CZTS) thin films10.1016/j.solener.2013.02.003 ↗
5. Deposition of Cu2ZnSnS4 thin films by vacuum thermal evaporation from single quaternary compound source10.1016/j.matlet.2012.01.018 ↗
6. Structure, composition and optical properties of Cu2ZnSnS4 thin films deposited by Pulsed Laser Deposition method10.1016/j.solmat.2011.06.026 ↗
7. Comparative study on Cu2ZnSnS4 thin films deposited by sputtering and pulsed laser deposition from a single quaternary sulfide target10.1016/j.jcrysgro.2012.09.023 ↗
8. Non-vacuum processed next generation thin film photovoltaics: towards marketable efficiency and production of CZTS based solar cells10.1016/j.solener.2013.04.017 ↗
9. Preparation of Cu2ZnSnS4 thin films by sulfurizing sol-gel deposited precursors10.1016/j.solmat.2007.04.012 ↗
10. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol-gel route10.1039/C3TA13533K ↗
11. Ethylene glycol-based dip coating route for the synthesis of Cu2ZnSnS4 thin film10.1016/j.matlet.2012.10.120 ↗
12. Cu2ZnSnS4 thin-films grown by dip-coating: Effects of annealing10.1016/j.jallcom.2015.11.233 ↗
13. Synthesis and characterization of Cu2ZnSnS4 absorber layers by an electrodeposition-annealing route10.1016/j.tsf.2008.11.022 ↗
14. Preparation of Cu2ZnSnS4 films by electrodeposition using ionic liquids10.1016/j.solmat.2009.09.003 ↗
15. A comparative study of Cu2ZnSnS4 thin films growth by successive ionic layer adsorption–reaction and sol-gel methods10.1016/j.tsf.2013.10.035 ↗
16. Synthesis and characterization of Cu2ZnSnS4 thin films by SILAR method10.1016/j.jpcs.2012.01.008 ↗
17. Synthesis of Cu2ZnSnS4 nanocrystal ink and its use for solar cells10.1021/ja904981r ↗
18. Synthesis of Cu2ZnSnS4 nanocrystals for use in low-cost photovoltaics10.1021/ja905922j ↗
19. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells10.1039/C5EE02153G ↗
20. Influence of precursor sulfur content on film formation and compositional changes in Cu2ZnSnS4 films and solar cells10.1016/j.solmat.2011.10.019 ↗
21. Effects of sulfurization temperature on CZTS thin film solar cell performances10.1016/j.solener.2013.09.020 ↗
22. Effect of post-sulfurization on the composition, structure and optical properties of Cu2ZnSnS4 thin films deposited by sputtering from a single quaternary target10.1016/j.apsusc.2012.09.140 ↗
23. Effect of copper concentration and spray rate on the properties Cu2ZnSnS4 thin films deposited using spray pyrolysis10.1016/j.jaap.2014.10.014 ↗
24. Studies of compositional dependent CZTS thin film solar cells by pulsed laser deposition technique: An attempt to improve the efficiency10.1016/j.jallcom.2012.07.108 ↗
25. Systematic compositional changes and their influence on lattice and optoelectronic properties of Cu2ZnSnS4 kesterite solar cells10.1016/j.solmat.2015.10.004 ↗
26. Secondary phases dependence on composition ratio in sprayed Cu2ZnSnS4 thin films and its impact on the high power conversion efficiency10.1016/j.solmat.2013.06.008 ↗
27. CZTS stoichiometry effects on the band gap energy10.1016/j.jallcom.2013.07.199 ↗
28. Structural, optical and electrical properties of spray-deposited CZTS thin films under a non-equilibrium growth condition10.1088/0022-3727/45/44/445103 ↗
29. Role of precursor solution in controlling the opto-electronic properties of spray pyrolysed Cu2ZnSnS4 thin films10.1016/j.solener.2010.12.005 ↗
30. Syntheses of Cu2SnS3 and Cu2ZnSnS4 nanoparticles with tunable Zn/Sn ratios under multibubble sonoluminescence conditions10.1039/c3dt50849h ↗
31. The Synthesis of Cu2ZnSnS4 Nanoparticles via an Open-Air Solution Route: Influences of Zn precursor Content10.1007/s10971-015-3670-z ↗
32. Effect of sulfurization time on properties of Cu2ZnSnS4 thin films obtained by sol–gel deposited precursors10.1007/s11082-016-0424-2 ↗
33. A non-toxic, solution-processed, earth abundant absorbing layer for thin-film solar cells10.1039/C1EE02314D ↗
34. Electrical properties of CuxZnySnS4 films with different Cu/Zn ratios10.1016/j.tsf.2013.10.134 ↗
35. Surface potential on grain boundaries and intragrains of highly efficient Cu2ZnSn(S,Se)4 thin-films grown by two-step sputtering process10.1016/j.solmat.2014.04.019 ↗
36. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
37. Nanoscale observation of surface potential and carrier transport in Cu2ZnSn(S,Se)4 thin films grown by sputtering-based two-step process10.1186/1556-276X-9-10 ↗
38. Enhancement of photo-conversion efficiency in Cu2ZnSn(S,Se)4 thin-film solar cells by control of ZnS precursor-layer thickness10.1002/pip.2693 ↗
39. Optical and surface probe investigation of secondary phases in Cu2ZnSnS4 films grown by electrochemical deposition10.1016/j.solmat.2015.03.003 ↗
40. Effects of Cu2−xS phase removal on surface potential of Cu2ZnSnS4 thin-films grown by electroplating10.1016/j.cap.2014.09.009 ↗
41. Interplay between surface preparation and device performance in CZTSSe solar cells: Effects of KCN and NH4OH etching10.1016/j.solmat.2015.01.006 ↗
42. Nanoscale surface potential variation correlates with local S/Se ratio in solution-processed CZTSSe solar cells10.1021/nl503068h ↗
43. A mild solvothermal route to kesterite quaternary Cu2ZnSnS4 nanoparticles10.1016/j.jcrysgro.2010.10.071 ↗
44. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗
45. A facile and low cost synthesis of earth abundant element Cu2ZnSnS4 (CZTS) nanocrystals: Effect of Cu concentrations10.1016/j.jallcom.2012.06.086 ↗
46. XPS analysis and structural and morphological characterization of Cu2ZnSnS4 thin films grown by sequential evaporation10.1016/j.apsusc.2014.03.124 ↗
47. Surfactant-free hydrothermal synthesis of Cu2ZnSnS4 (CZTS) nanocrystals with photocatalytic properties10.1039/C4RA03444A ↗
48. Characterization of electronic structure of Cu2ZnSn(SxSe1-x)4 absorber layer and CdS/Cu2ZnSn(SxSe1-x)4 interfaces by in-situ photoemission and inverse photoemission spectroscopies10.1016/j.tsf.2014.09.037 ↗
49. WSXM: a software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
50. Kelvin probe force microscopy and its application10.1016/j.surfrep.2010.10.001 ↗
51. Nanoscale Mapping of Layer-Dependent Surface Potential and Junction Properties of CVD-Grown MoS2 Domains10.1021/acs.jpcc.5b05818 ↗
52. Study of charge separation and interface formation in a single nanorod CdS-CuxS heterojunction solar cell using Kelvin probe force microscopy10.1088/0957-4484/24/25/255703 ↗
53. Novel synthesis of kesterite Cu2ZnSnS4 nanoflakes by successive ionic layer adsorption and reaction technique: characterization and application10.1016/j.electacta.2012.01.079 ↗
54. Scalable heating-up synthesis of monodisperse Cu2ZnSnS4 nanocrystals10.1021/acs.chemmater.5b03417 ↗
55. Improvement of Jsc in a Cu2ZnSnS4 Solar Cell by Using a Thin Carbon Intermediate Layer at the Cu2ZnSnS4/Mo Interface
56. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.031 ↗
57. Controlling Cu2ZnSnS4 photocatalytic ability through alterations in sulfur availability10.1016/j.cattod.2015.05.028 ↗
58. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
59. Sulfurization time effects on the growth of Cu2ZnSnS4 thin films by solution method10.1007/s10854-013-1153-y ↗
60. Solvothermal synthesis of flower-like Cu2ZnSnS4 nanostructures and their application as anode materials for lithium-ion batteries10.1016/j.cplett.2012.07.060 ↗
61. X-ray photoelectron spectra of inorganic molecules: Observations concerning the sulfur 2p binding energies in metal complexes of thiourea10.1016/S0020-1693(00)95656-1 ↗
62. X-ray photoelectron spectra and electronic structure of some diamine compounds10.1016/0368-2048(77)85052-4 ↗
63. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS410.1063/1.3275796 ↗
64. Classification of Lattice Defects in the Kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 Earth-Abundant Solar Cell Absorbers10.1002/adma.201203146 ↗
65. “Defect formation and phase stability of Cu2ZnSnS4 photovoltaic material10.1103/PhysRevB.81.113202 ↗