journal article·2015-06

Cu2ZnSnS4−xSex solar cells fabricated with precursor stacked layer ZnS/Cu/SnS by a CBD method

Jianmin Li, Guilin Chen, Cong Xue, Xin Jin, Weifeng Liu, Changfei Zhu

Publisher page

Abstract

Abstract A novel idea that using chemical bath deposition-annealing route for preparing absorber films of the Cu2ZnSnS4−xSex solar cells with stacked layers (ZnS/Cu/SnS) was proposed and carried out in this study. The absorber layers fabricated by this new method were demonstrably proper for solar cell devices. The solar cells based on the as-synthesized Cu2ZnSnS4−xSex/Cu2ZnSnS4 layers showed high photoelectric transformation efficiency, nearly 3.0% and 2.2% with the large area 1.27 cm2 and 1.80 cm2, respectively. The new method introduced here based on chemical bath deposition without the complexity of vacuum equipment may provide an alternative approach to produce large area solar cells for practical application. In addition, during the deposition of the stacked layers, a new concept called Assistant Reduction Reaction was firstly carried out to deposit metallic Cu thin film on the SnS film, which acted as not only a substrate, but also an assistant reductive agent. If the present technique is properly extended, it is possible for the preparation of other metal thin films for practical application.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Solution-based synthesis and characterization of Cu2ZnSnS4 nanocrystals10.1021/ja9044168 ↗
2. Structural, electronic and optical properties in earth-abundant photovoltaic absorber of Cu2ZnSnS4 and Cu2ZnSnSe4 from DFT calculations10.1016/S1452-3981(23)07770-2 ↗
3. A 3.2% efficient Kesterite device from electrodeposited stacked elemental layers10.1016/j.jelechem.2010.01.008 ↗
4. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
5. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
6. Characterization of defects in 9.7% efficient Cu2ZnSnSe4–CdS–ZnO solar cells10.1063/1.4826448 ↗
7. Solution-processed Cu2ZnSnS4 nanocrystal solar cells: efficient stripping of surface insulating layers using alkylating agents10.1021/jp408360j ↗
8. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
9. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
10. Comparative study of Cu2ZnSnS4 film growth10.1016/j.solmat.2010.04.060 ↗
11. Cu2ZnSnS4 thin films: facile and cost-effective preparation by RF-magnetron sputtering and texture control10.1016/j.jallcom.2012.11.082 ↗
12. Characterization of a CZTS thin film solar cell grown by sputtering method10.1016/j.solener.2013.11.035 ↗
13. Fabrication of Cu2ZnSnS4 thin-film solar cell prepared by pulsed laser deposition10.1143/JJAP.46.5780 ↗
14. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency10.1002/pip.2332 ↗
15. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel route10.1039/C3TA13533K ↗
16. Cu2ZnSnS4 thin films deposition by ultrasonic spray pyrolysis10.1016/j.jallcom.2012.07.063 ↗
17. Aqueous bath process for deposition of Cu2ZnSnS4 photovoltaic absorbers10.1016/j.tsf.2010.11.040 ↗
18. One-step deposition of Cu2ZnSnS4 thin films for solar cells10.1016/j.solmat.2013.05.039 ↗
19. Novel synthesis of kesterite Cu2ZnSnS4 nanoflakes by successive ionic layer adsorption and reaction technique: characterization and application10.1016/j.electacta.2012.01.079 ↗
20. Cu2ZnSnS4 thin film solar cells10.1016/j.tsf.2004.11.024 ↗
21. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗
22. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
23. Semiconductor thin films by chemical bath deposition for solar energy related applications10.1016/S0927-0248(97)00237-7 ↗
24. Determination of secondary phases in kesterite Cu2ZnSnS4 thin films by x-ray absorption near edge structure analysis10.1063/1.3671994 ↗
25. Structural and elemental characterization of high efficiency Cu2ZnSnS4 solar cells10.1063/1.3543621 ↗
26. Effect of deposition time on structural, electrical, and optical properties of SnS thin films deposited by chemical bath deposition10.1016/j.apsusc.2010.07.104 ↗
27. One-step chemical bath deposition and photocatalytic activity of Cu2O thin films with orientation and size controlled by a chelating agent10.1016/j.matchemphys.2013.10.004 ↗
28. Physical properties of very thin SnS films deposited by thermal evaporation10.1016/j.tsf.2011.01.355 ↗
29. Moulder · 1995
30. Study of molybdenum back contact layer to achieve adherent and efficient CIGS2 absorber thin-film solar cells10.1116/1.1889440 ↗
31. Characterization of Cu2ZnSnS4 thin films prepared by vapor phase sulfurization10.1143/JJAP.40.500 ↗
32. Direct evidence of current blocking by ZnSe in Cu2ZnSnSe4 solar cells10.1063/1.4706256 ↗
33. Photoluminescence and Raman study of Cu2ZnSn(SexS1−x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
34. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
35. A facile and low-cost synthesis of promising absorber materials on Cu2ZnSn(Sx,Se1−x)4 nanocrystals consisting of earth abundant elements with tunable band gap characteristics10.1039/c2jm33802e ↗
36. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
37. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 Earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
38. Effect of zinc addition on properties of cadmium sulfide layer and performance of Cu(In,Ga)Se2 solar cell10.1016/j.tsf.2012.11.077 ↗