journal article·2014-01

The influence of oxygen on the microstructural, optical and photochromic properties of polymer-matrix, tungsten-oxide nanocomposite films

Travis J. DeJournett, James B. Spicer

Publisher page

Abstract

Abstract An in situ vapor deposition process has been used to create a photochromic, tungsten-oxide, polymer matrix nanocomposite. Under specific processing conditions, the composite consists of discrete tungsten-oxide nanoparticles distributed uniformly throughout the bulk of an optically transparent fluoropolymer matrix. Ultraviolet exposure of the nanocomposite produces characteristic photochromic changes that result in a 40% change in optical transmission. Optical absorption measurements yield a value of 3.08 eV for the bandgap of the tungsten-oxide particles. Incorporating oxygen as a supplementary deposition agent in the synthesis process increased the transparency of the films in the visible region, increased the change in transmission due to the photochromic effect, and led to the percolation of larger nanoparticles near the film surface. Growth of particles in this region allowed the nanocomposite to be bleached readily in an oxygen atmosphere while retaining photochromic activity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Photochromism of molybdenum oxide10.1016/S1389-5567(03)00025-X ↗
2. Chromic mechanism in amorphous WO3 films10.1149/1.1837737 ↗
3. Optically switchable thin films: a review10.1016/0040-6090(94)90668-8 ↗
4. Synthesis and characterization of photochromic molybdenum and tungsten oxide nanoparticles10.1016/S0965-9773(99)00102-6 ↗
5. Nanocrystalline tungsten oxide thin film: preparation, microstructure, and photochromic behavior10.1557/JMR.2000.0132 ↗
6. A novel route to synthesizing monoclinic tungsten oxide nanostructures10.1007/s11837-005-0184-0 ↗
7. WO3 nanoparticles in the 5–30nm range by solvothermal synthesis under microwave or resistive heating10.1021/jp908669u ↗
8. Nanoparticles from the vapor phase: synthesis and characterization of Si, Ge, MoO3, and WO3 nanocrystals10.1023/A:1021957108775 ↗
9. Nanostructure fabrication by electron-beam-induced deposition with metal carbonyl precursor and water vapor10.1143/JJAP.46.6183 ↗
10. T.S. Koloski, T.G. Vargo, Polymer and inorganic–organic hybrid composites and methods for making same, United States Patent 5, 977, 241, 1999.
11. T.S. Koloski, T.G. Vargo, Polymer and inorganic–organic hybrid composites and methods for making and using same, United States Patent 6, 608, 129, 2003.
12. Formation and coalescence of tungsten nanoparticles under electron beam irradiation10.1016/S0965-9773(99)00079-3 ↗
13. On the structure, stress and optical properties of CVD tungsten oxide films10.1016/j.materresbull.2004.10.017 ↗
14. Comparison between electrochromic and photochromic coloration efficiency of tungsten oxide thin films10.1016/S0038-1098(96)00703-X ↗
15. Size distribution analysis of colloidal gold by small angle X-ray scattering and light absorbance10.1016/S0032-5910(02)00340-6 ↗
16. Linear and nonlinear optical behavior of palladium nanoparticle reinforced fluoropolymer composites10.1016/j.cplett.2007.07.087 ↗
17. Photochromic materials based on tungsten oxide10.1039/b709380b ↗
18. Opportunities and challenges in science and technology of WO3 for electrochromic and related applications10.1016/j.solmat.2007.01.026 ↗
19. Modeling interband transitions in silver nanoparticle–fluoropolymer composites10.1021/jp046687h ↗
20. Improved current collection in WO3:Mo/WO3 bilayer photoelectrodes
21. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
22. Bandgap renormalization in titania modified nanostructured tungsten oxide thin films prepared by pulsed laser deposition technique for solar cell applications10.1063/1.2953070 ↗
23. Structural transformation induced changes in the optical properties of nanocrystalline tungsten oxide thin films10.1063/1.3421540 ↗
24. Single-crystal tungsten oxide nanosheets: photochemical water oxidation in the quantum confinement regime10.1021/cm203293j ↗
25. Effects of oxygen gettering and target mode change in the formation process of reactively RF sputtered WOx thin films10.1016/S0042-207X(02)00153-7 ↗
26. Optical and electrochromic properties of RF reactively sputtered WO3 films10.1016/j.ssi.2003.08.030 ↗
27. Preparation and properties of the DC reactively sputtered tungsten oxide films10.1063/1.340272 ↗
28. Polaron and phonon properties in proton intercalated amorphous tungsten oxide thin films10.1103/PhysRevB.78.245205 ↗
29. Electrodeposited tungsten oxide films: annealing effects on structure and electrochromic performance10.1016/j.tsf.2004.04.056 ↗
30. Obtaining of films of tungsten trioxide (WO3) by resistive heating of a tungsten filament
31. Infrared and Raman study of WO3 tungsten trioxides and WO3xH2O tungsten trioxide hydrates10.1016/0022-4596(87)90359-8 ↗
32. Nanostructured mesoporous tungsten oxide films with fast kinetics for electrochromic smart windows10.1088/0957-4484/17/10/030 ↗
33. Effect of the tungsten oxidation states in the thermal coloration and bleaching of amorphous WO3 films10.1016/S0040-6090(00)01828-9 ↗
34. Quantification of active sites for the determination of methanol oxidation turn-over frequencies using methanol chemisorption and in situ infrared techniques. 1. supported metal oxide catalysts10.1021/la010009u ↗
35. The role of oxygen partial pressure and annealing temperature on the formation of W=O bonds in thin WO3 films10.1088/0268-1242/17/6/304 ↗
36. Insights into the damage mechanism of Teflon® FEP from the hubble space telescope10.1088/0954-0083/12/1/307 ↗