Low band gap poly(1,4-arylene-2,5-thienylene)s with benzothiadiazole units: Synthesis, characterization and application in polymer solar cells
Source abstract
Abstract
We describe the synthesis of two novel poly(1,4-arylene-2,5-thienylene)s P1 and P2 containing benzo[c][2,1,3]thiadiazole monomeric units via Suzuki-Miyaura polymerization of a thiophene diboronic ester with aryl diiodides. The use of a catalyst complex consisting of Pd(OAc)(2) in combination with the electron-rich biaryl phosphine S-Phos resulted in efficient polymerization reactions. The polymers synthesized, P1 and P2, were characterized by UV-vis spectroscopy and cyclic voltammetry. Theoretical calculations and electrochemical measurements on P1 suggested a favorable position of the molecular orbitals for employment in polymer solar cells in combination with PCBM. Devices containing P1:PCBM 1:2 in the active layer showed an efficiency of 1.2% by simple spin casting from chloroform. (C) 2011 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. 2005
2. 2007 · vol. 2
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
5. Grid-connected polymer solar panels:initial consideration of cost, lifetime and practicality10.1364/OE.18.00A272 ↗
6. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary acreen printing10.1039/c0jm01178a ↗
7. Manufacture, integration and demonstration of polymer solar cells in a lamp for the “Lighting Africa” initiative10.1039/b918441d ↗
8. Low band gap polymers for roll-to-roll coated organic photovoltaics—design, synthesis and characterization10.1515/green.2011.005 ↗
9. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
10. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
11. Fullerene reactivity—fullerene cations and open-cage fullerenes
12. A life-cycle analysis of polymer solar cells modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
13. Life-cycle analysis of product integrated solar cells10.1039/c1ee01127h ↗
14. Low band-gap polymers for coated roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
15. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
16. A low-bandgap semiconducting polymer for photovoltaic devices and infrared emitting diodes10.1002/1616-3028(20021016)12:10<709::AID-ADFM709>3.0.CO;2-N ↗
17. high-performance polymer solar cells of an alternating polyfluorene copolymer and a fullerene derivative10.1002/adma.200304150 ↗
18. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends10.1002/adfm.200500339 ↗
19. Low-bandgap alternating fluorene copolymer/methanofullerene heterojunctions in efficient near-infrared polymer solar cells10.1002/adma.200600124 ↗
20. Regioregular copolymers of 3-alkoxythiophene and their photovoltaic application10.1021/ja061664x ↗
21. Low-band gap poly(di-2-thienylthienopyrazine):fullerene solar cells10.1063/1.2195897 ↗
22. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
23. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
24. Regioregular poly(3-hexyl)selenophene: a low band gap organic hole transporting polymer10.1039/b712398a ↗
25. Synthesis and photovoltaic properties of a novel low band gap polymer based on N-substituted dithieno[3,2-b:2′,3′-d]pyrrole10.1021/ma802052w ↗
26. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
27. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
28. Low band gap polymers based on 1,4-dialkoxybenzene, thiophene, bithiophene donors and the benzothiadiazole acceptor10.1016/j.solmat.2009.12.023 ↗
29. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
30. Synthetic principles for bandgap control in linear π-conjugated systems10.1021/cr950257t ↗
31. Molecular engineering of the band gap of π-conjugated systems: facing technological applications10.1002/marc.200700345 ↗
32. New narrow-bandgap polymer composed of benzobis(1,2,5-thiadiazole) and thiophenes10.1021/ja00130a024 ↗
33. How to build fully π-conjugated architectures with thienylene and phenylene fragments10.1002/ejoc.200601114 ↗
34. Phase equilibria in rodlike systems with flexible side chains10.1021/ma00159a015 ↗
35. Thiophene–phenylene and thiophene-thzazole oligomeric semiconductors with high field-effect transistor on/off ratios10.1021/cm010496z ↗
36. Thin film construction and characterization and gas-sensing performances of a tailored phenylene–thienylene copolymer10.1021/ja035490k ↗
37. Easily processable phenylene–thiophene-based organic field-effect transistors and solution-fabricated nonvolatile transistor memory elements10.1021/ja035143a ↗
38. Facchetti · Chem. Mater. · 2004 · 16 · 471510.1021/cm0495008 ↗
39. 1,4-Bis(5-decyl-2,2′-bithien-5-yl)benzene as new stable organic semiconductor for high performance thin film transistors10.1016/j.synthmet.2005.01.007 ↗
40. Decyl-end-capped thiophene–phenylene oligomers as organic semiconducting materials with improved oxidation stability10.1021/cm052210m ↗
41. Poly(alkoxyphenylene-thienylene) Langmuir-Schäfer thin films for advanced performance transistors10.1021/cm0524291 ↗
42. Correlating molecular structure to field-effect mobility: the investigation of side-chain functionality in phenylene–thiophene oligomers and their application in field effect transistors10.1021/cm070117n ↗
43. A sensitivity-enhanced field-effect chiral sensor10.1038/nmat2167 ↗
44. Synthesis of D- glucose and L-phenylalanine substituted phenyleneethiophene oligomers10.1016/j.tet.2010.11.004 ↗
45. Polymer photovoltaics with alternating copolymer/fullerene blends and novel device architectures10.1002/adma.200904407 ↗
46. A conjugated polymer for near infrared optoelectronic applications10.1002/adma.200700557 ↗
47. A general strategy for the synthesis of conjugated polymers based upon the palladium-catalysed cross-coupling of Grignard reagents with unsaturated halides10.1002/1099-0690(200208)2002:16<2785::AID-EJOC2785>3.0.CO;2-1 ↗
48. Aligning single-walled carbon nanotubes by means of Langmuir–Blodgett film deposition: optical, morphological, and photo-electrochemical studies10.1002/adfm.201000290 ↗
49. Influence of the introduction of phenylene units into the polymer backbone on bandgap of conjugated poly(heteroarylene methynes)10.1016/j.polymer.2005.05.054 ↗
50. Synthesis and ionochromic properties of chelating conjugated properties10.1039/a905912a ↗
51. A polymer gel electrolyte to achieve ≥6% power conversion efficiency with a novel organic dye incorportating a low-band-gap chromophore10.1039/b809376h ↗
52. Strongly red fluorescent novel donor-π-bridge-acceptor-π-bridge-donor (D-π-A-π-D) type 2,1,3-benzothiadiazoles with enhanced two-photons absorption cross-sections10.1039/B410016F ↗
53. Energy transfer in new D-π-A conjugated dendrimers: their synthesis and photophisycal properties10.1021/ol801671w ↗
54. Metal-Catalyzed Cross-Coupling Reactions of Organoboron Compounds with Organic Halides
55. Mechanistic aspects of the Suzuki polycondensation of thiophenebisboronic derivatives and diiodobenzenes analyzed by MALDI−TOF mass spectrometry10.1021/ma0100403 ↗
56. New convenient synthesis of highly regioregular poly(3-octylthiophene) based on the Suzuki coupling reaction10.1016/S0379-6779(97)04102-7 ↗
57. Synthesis and characterisation of telechelic regioregular head-to-tail poly(3-alkylthiophenes)10.1039/a706583c ↗
58. Using Grignard metathesis to synthesize regioregular, head-to-tail coupled poly(3-substituted)thiophenes
59. A simple method to prepare head-to-tail coupled, regioregular poly(3-alkylthiophenes) using Grignard metathesis10.1002/(SICI)1521-4095(199903)11:3<250::AID-ADMA250>3.0.CO;2-J ↗
60. Regioregular, head-to-tail coupled poly(3-alkylthiophenes) made easy by the GRIM method: investigation of the reaction and the origin of regioselectivity10.1021/ma001677+ ↗
61. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by Rieke zinc: their characterization and solid-state properties10.1021/ja00106a027 ↗
62. Advances in molecular design and synthesis of regioregular polythiophenes10.1021/ar800130s ↗
63. Palladium-catalyzed Suzuki−Miyaura cross-coupling reactions employing dialkylbiaryl phosphine ligands10.1021/ar800036s ↗
64. A rationally designed universal catalyst for Suzuki–Miyaura coupling processes10.1002/anie.200353615 ↗
65. Catalysts for Suzuki−Miyaura coupling processes: scope and studies of the effect of ligand structure10.1021/ja042491j ↗
66. Suzuki route to regioregular polyalkylthiophenes using Ir-catalysed borylation to make the monomer, and Pd complexes of bulky phosphanes as coupling catalysts for polymerisation10.1016/j.tetlet.2006.05.063 ↗
67. Iridium-catalyzed direct borylation of five-membered heteroarenes by bis(pinacolato)diboron: regioselective, stoichiometric, and room temperature reactions10.1002/adsc.200303058 ↗
68. The electronic states of polyfluorene copolymers with alternating donor–acceptor units10.1063/1.1817873 ↗
69. Chain-length dependence of electronic and electrochemical properties of conjugated systems: polyacetylene, polyphenylene, polythiophene, and polypyrrole10.1021/ja00360a004 ↗
70. Efficient two layer leds on a polymer blend basis10.1002/adma.19950070608 ↗
71. Synthesis, optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron-rich arene units10.1002/pola.10327 ↗
72. Polymer-fullerene composite solar cells10.1002/anie.200702506 ↗
73. Solvation-induced morphology effects on the performance of polymer-based photovoltaic devices10.1002/1616-3028(200112)11:6<420::AID-ADFM420>3.0.CO;2-K ↗
74. Influence of donor and acceptor substituents on the electronic characteristics of poly(paraphenylene vinylene) and poly(paraphenylene)10.1016/0009-2614(93)E1421-C ↗
75. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
76. Novel regiospecific MDMO-PPV polymers with improved charge transport properties for bulk heterojunction solar cells10.1016/j.synthmet.2005.07.151 ↗
77. Frisch · 2009
78. 1989
79. Density-functional exchange-energy approximation with correct asymptotic behavior10.1103/PhysRevA.38.3098 ↗
80. Development of the Colle–Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
81. Theoretical investigation of the conformational behavior of 2,2′-bithiophene10.1016/0009-2614(93)80088-7 ↗
82. Ab initio determination of the geometric structure and internal rotation potential of 2,2′-bithiophene10.1021/j100014a014 ↗
83. Single-bond torsional potentials in conjugated systems: a comparison of ab initio and density functional results10.1021/jp971606l ↗
84. Improved quantum mechanical study of the potential energy surface for the bithiophene molecule10.1063/1.1288383 ↗
85. DFT calculations of the local spin densities and oligomerization mechanism of thiophene–phenylene (TP) co-oligomers and derivatives10.1016/j.theochem.2007.02.043 ↗