Excellent surface passivation of heavily doped p+ silicon by low-temperature plasma-deposited SiOx/SiNy dielectric stacks with optimised antireflective performance for solar cell application
Source abstract
Abstract
Abstract The passivation of p + Si surfaces is challenging due to the fact that most passivation films have an intrinsically high positive fixed charge. In this work we show experimentally that low-temperature plasma-enhanced chemical vapor deposited SiO x /SiN y stacks with a low positive fixed charge density (+10 11 cm −2 ) and very low interface defect density (~3×10 10 eV −1 cm −2 ) as measured by contactless corona-voltage measurements can effectively passivate p + surfaces resulting in emitter saturation current density ( J 0 e ) values of 25 and 45 fA/cm 2 on planar and textured 75 Ω/sq p + silicon after industrial firing with a set-temperature of ~800 °C, respectively. Based on contactless corona-voltage measurements and advanced device simulations, we explain the mechanism of surface passivation by PECVD SiO x /SiN y dielectric stack to be completely dominated by chemical passivation rather than field-effect passivation. Furthermore, from advanced device simulations we illustrate the role of fixed charge in surface passivation and in the extraction of fundamental surface recombination velocity parameter for p + silicon surfaces. The fundamental surface recombination velocity parameter for electrons is determined to be about 400 cm/s at these c -Si/SiO x interfaces. With excellent optical and passivation properties, SiO x /SiN y dielectric stacks are suitable for high-efficiency and cost-effective industrial n -type silicon wafer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗
2. P.P. Altermatt, H. Plagwitz, R. Bock, J. Schmidt, R. Brendel, M.J. Kerr, A. Cuevas, The surface recombination velocity at boron-doped emitters: comparison between various passivation techniques, in: Proceedings of 21st European Photovoltaic Solar Energy Conference, Dresden, 2006, 647 pp
3. J. Libal, R. Petres, T. Buck, R. Kopecek, G. Hahn, R. Ferre, M. Vetter, I. Martn, K. Wambach, I. Roever, P. Fath, N-type multicrystalline silicon solar cells: BBr3-diffusion and passivation of p+-diffused silicon surfaces, in: Proceedings of 20th European Photovoltaic Solar Energy Conference, Paris, 2005, pp. 793–796.
4. M.J. Kerr, Surface, Emitter and bulk recombination in silicon and development of silicon nitride passivated solar cells, in: Faculty of Engineering and Information Technology, Department of Engineering, Australian National University, Canberra, 2002.
5. J. Benick, High-efficiency n-type solar cells with a front side boron emitter, in, Albert-Ludwigs-University of Freiburg, 2010, 194 pp.
6. Studies of diffused boron emitters: saturation current, bandgap narrowing, and surface recombination velocity10.1109/16.81632 ↗
7. Passivation of boron emitters on n-type silicon by plasma-enhanced chemical vapor deposited silicon nitride10.1063/1.2217167 ↗
8. F.W. Chen, I. Romijn, A. Weeber, J. Tan, B. Hallam, J.E. Cotter, Relationship between PECVD silicon nitride film composition and surface and edge passivation, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, 2007, pp. 1053–1060.
9. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
10. S.W. Glunz, J. Benick, D. Biro, M. Bivour, M. Hermle, D. Pysch, M. Rauer, C. Reichel, A. Richter, M. Rudiger, C. Schmiga, D. Suwito, A. Wolf, R. Preu, n-type silicon – enabling efficiencies ≥ 20% in industrial production, in: Proceedings of 35th IEEE Photovoltaic Specialists Conference (PVSC), 35th IEEE, 2010, pp. 000050–000056.10.1109/PVSC.2010.5614203 ↗
11. Nitric acid pretreatment for the passivation of boron emitters for n-type base silicon solar cells10.1063/1.2870202 ↗
12. Effective passivation of Si surfaces by plasma deposited SiOx/α-SiNx:H stacks10.1063/1.3595940 ↗
13. S. Duttagupta, F. Lin, K. Devappa Shetty, A.G. Aberle, B. Hoex, Excellent boron emitter passivation for high-efficiency Si wafer solar cells using AlOx/SiNx dielectric stacks deposited in an industrial inline plasma reactor, Photovoltaics: Research and Applications, 21 (2013) 760–764.
14. Contactless determination of current–voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
15. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialist Conference (PVSC), Las Vegas, 1985, pp. 578–581.
16. General parameterization of Auger recombination in crystalline silicon10.1063/1.1432476 ↗
17. M. Wilson, J. D′Amico, A. Savtchouk, P. Edelman, A. Findlay, L. Jastrzebski, J. Lagowski, K. Kis-Szabo, F. Korsos, A. Toth, A. Pap, R. Kopecek, K. Peter, Multifunction metrology platform for photovoltaics, in: Proceeding of the 37th IEEE Photovoltaic Specialists Conference (PVSC), 2011, pp. 001748–001753.10.1109/PVSC.2011.6186292 ↗
18. Investigation of high-K dielectric properties with the non-contact SASS technique
19. COCOS (Corona oxide characterization of semiconductor) non-contact metrology for gate dielectrics10.1063/1.1354401 ↗
20. S. Duttagupta, F. Lin, M. Wilson, M.B. Boreland, B. Hoex, A.G. Aberle, Extremely low surface recombination velocities on low-resistivity n-type and p-type crystalline silicon using dynamically deposited remote plasma silicon nitride films, Photovoltaics: Research and Applications, doi:10.1002/pip.2320.10.1002/pip.2320 ↗
21. Surface passivation of phosphorus-diffused n+-type emitters by plasma-assisted atomic-layer deposited Al2O310.1002/pssr.201105445 ↗
22. Prediction of the open-circuit voltage of solar cells from the steady-state photoconductance10.1002/(SICI)1099-159X(199703/04)5:2<79::AID-PIP155>3.0.CO;2-J ↗
23. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
24. Electron–hole recombination in germanium10.1103/PhysRev.87.387 ↗
25. Determination of Si–SiO2 interface recombination parameters using a gate-controlled point-junction diode under illumination10.1109/16.2441 ↗
26. Impact of illumination level and oxide parameters on Shockley–Read–Hall recombination at the Si–SiO2 interface10.1063/1.350782 ↗
27. SENTAURUS Manual, in: SENTAURUS, Synopsys Inc., Mountain View, CA, 2011.
28. Assessment and parameterisation of Coulomb-enhanced Auger recombination coefficients in lowly injected crystalline silicon10.1063/1.366360 ↗
29. Numerical modeling of highly doped Si:P emitters based on Fermi–Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
30. S. Duttagupta, L. Fen, K.D. Shetty, M. Wilson, M. Fa-Jun, L. Jiaji, A.G. Aberle, B. Hoex, State-of-the-art surface passivation of boron emitters using inline PECVD AlOx/SiNx stacks for industrial high-efficiency silicon wafer solar cells, in: Proceedings of 38th IEEE Photovoltaic Specialists Conference (PVSC), 2012, pp. 001036–001039.10.1109/PVSC.2012.6317780 ↗