journal article·2012-02

Molecular structure of poly(3-alkyl-thiophenes) investigated by calorimetry and grazing incidence X-ray scattering

Jose Abad, Nieves Espinosa, Pilar Ferrer, Rafael García-Valverde, Carmen Miguel, Javier Padilla, Alberto Alcolea, German R. Castro, Jaime Colchero, Antonio Urbina

Publisher page

Abstract

Abstract A study of the molecular structure of regio-regular bulk poly-3-octyl-thiophene (P3OT) and poly-3-hexyl-thiophene (P3HT) and the phase transitions during heating and cooling scans in a temperature range of –158–773 °C has been performed by means of calorimetry of bulk samples and grazing incidence X-ray diffraction from synchrotron radiation. Additional calorimetric measurements were performed on samples in toluene solution. From the calorimetric temperature diagrams at different scan rates, we obtain the melting and crystallization temperatures, and we identify a low temperature calorimetric glass transition. This transition is expected because of the coexistence of amorphous and crystalline phases, which is further supported by scanning force microscopy images where lamellar structures have been observed. Thin films of both polymers have also been studied by grazing incidence X-ray diffraction, and the evolution of the (1 0 0) crystalline peak monitored as a function of sample temperature, showing different behavior in both polymers, d -spacing increases in P3HT and decreases in P3OT for increasing temperatures. The information presented in this article will be useful to design fabrication techniques for organic-based electronic devices, which could include high and low temperature cycles combined with structural quenching procedures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Electrical conductivity in doped polyacetylene10.1103/PhysRevLett.39.1098 ↗
2. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene: fullerene solar cells10.1038/nmat1574 ↗
3. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
5. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗
6. Light-emitting-diodes based on conjugated polymers10.1038/347539a0 ↗
7. Molecular-scale interface engineering for polymer light-emitting diodes10.1038/35006610 ↗
8. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
9. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
10. High photovoltaic performance of inkjet printed polymer: fullerene blends10.1002/adma.200700911 ↗
11. Polymer based organic solar cells using ink-jet printed active layers10.1063/1.2833185 ↗
12. Binary organic photovoltaic blends: a simple rationale for optimum compositions10.1002/adma.200800963 ↗
13. Crystallization mechanism of regioregular poly(3-alkyl thiophene)s10.1002/polb.10272 ↗
14. Crystalline-crystalline Poly(3-hexylthiophene)-polyethylene diblock copolymers: solidification from the melt10.1016/j.polymer.2008.07.006 ↗
15. Electronic and structural properties of poly-(3-octylthiophene) and graphitic nanoparticle blends10.1051/epjap:2007001 ↗
16. Surface potential domains on lamellar P3OT structures10.1088/0957-4484/19/6/065709 ↗
17. Optical design of the general-purpose Spanish X-ray beamline for absorption and diffraction10.1107/S0909049597019079 ↗
18. X-ray structural studies of poly(3-alkylthiophenes): an example of an inverse comb10.1021/ma00043a019 ↗
19. Winokur · 1989 · 707
20. Layered self-organized structures on poly(3-octylthiophene) thin films studied by scanning probe microscopy10.1016/j.eurpolymj.2008.05.019 ↗
21. Fabrication of regioregular poly(3-hexylthiophene) field-effect transistors by dip-coating10.1016/j.synthmet.2004.06.026 ↗
22. Effect of mesoscale crystalline structure on the field-effect mobility of regioregular poly(3-hexyl thiophene) in thin-film transistors10.1002/adfm.200400297 ↗
23. Effect of macromolecular parameters and processing conditions on supramolecular organisation, morphology and electrical transport properties in thin layers of regioregular poly(3-hexylthiophene)10.1016/j.synthmet.2006.04.012 ↗
24. Götze · 1989
25. X-ray diffraction and infra-red spectroscopy studies of oriented poly(3-alkylthiophenes10.1016/0032-3861(91)90390-5 ↗
26. Effects of annealing on the nanomorphology and performance of poly(alkylthiophene): fullerene bulk-heterojunction solar cells10.1002/adfm.200601038 ↗
27. Regiocontrolled synthesis of poly(3-alkylthiophenes) mediated by Rieke zinc: their characterization and solid-state properties10.1021/ja00106a027 ↗
28. Surface structure determination by X-ray diffraction10.1016/0167-5729(89)90002-2 ↗
29. Effect of annealing on the electronic structure of poly(3-hexylthiophene) thin film10.1039/B914100F ↗