ZnO–Ag–MoO3 transparent composite electrode for ITO-free, PEDOT: PSS-free bulk-heterojunction organic solar cells
Source abstract
Abstract
Abstract We report on the electrical and optical properties of ZnO/Ag/MoO 3 (ZAM) multilayer electrodes deposited directly on glass substrates by a combination of radio frequency (RF) and direct current (DC) sputtering for bulk-heterojunction organic solar cells (OSCs). Compared to indium tin oxide (ITO) electrodes showing 20 Ω/sq, the transparent composite electrodes (TCE) in this study exhibited very low sheet resistance of 5 Ω/sq without post annealing. In addition, as a hole transport layer, the MoO 3 performed with a higher fill factor than PEDOT:PSS due to lower series resistance, resulting in a power conversion efficiency of 2.3%, V oc of 0.59 V, and J sc of 9 mA/cm 2 . The power conversion efficiency of the OSC with the ZAM electrode is lower than that of organic solar cells on ITO which has 3.3% efficiency, due to lower transmittance after MoO 3 layer deposition. However, our results do support the possibility of using MoO 3 as both Ag protecting and hole transport layers for indium-less and PEDOT:PSS-less bulk-heterojunction OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating technique10.1016/j.solmat.2008.10.004 ↗
2. High-conductivity large-area semi-transparent electrodes for polymer photovoltaics by silk screen printing and vapour-phase deposition10.1016/j.solmat.2005.02.004 ↗
3. High-conductivity poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
4. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
5. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
6. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
7. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
8. A brief history of the development of organic and polymeric photovoltaics10.1016/j.solmat.2004.02.021 ↗
9. Design rules for donors in bulk-heterojunction solar cells-towards 10% energy conversion efficiency10.1002/adma.200501717 ↗
10. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
11. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
12. Low temperature solution processing of graphene–carbon nanotube hybrid materials for high performance transparent conductors10.1021/nl9001525 ↗
13. High efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
14. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
15. Polymer solar cells10.1038/nphoton.2012.11 ↗
16. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
17. Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
18. ITO-free wrap through organic solar cells-a module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
19. Organic solar cells with solution-processed graphene transparent electrodes10.1063/1.2924771 ↗
20. Towards efficient tin-doped indium oxide (ITO) free inverted organic solar cells using metal cathodes10.1063/1.3059552 ↗
21. Electrode grids for ITO-free organic photovoltaic devices10.1002/adma.200602561 ↗
22. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
23. Low resistance and highly transparent ITO–Ag–ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cells10.1016/j.solmat.2009.06.014 ↗
24. Highly flexible, transparent, and low resistance indium zinc oxide–Ag–indium zinc oxide multilayer anode on polyethylene terephthalate substrate for flexible organic light light-emitting diodes10.1016/j.tsf.2008.06.025 ↗
25. Multilayer graphene films as transparent electrodes for organic photovoltaic devices10.1016/j.solmat.2011.09.031 ↗
26. Transparent and flexible PEDOT:PSS electrodes passivated by thin IZTO film using plasma-damage free linear facing target sputtering for flexible organic solar cells10.1016/j.solmat.2012.10.015 ↗
27. Brush painting of transparent PEDOT/Ag nanowire/PEDOT multilayer electrodes for flexible organic solar cells10.1016/j.solmat.2013.02.020 ↗
28. High quality transparent conductive electrodes in organic photovoltaic devices10.1016/j.tsf.2009.03.221 ↗
29. Highly flexible transparent electrodes for organic light-emitting diode-based displays10.1063/1.1806559 ↗
30. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
31. Single-material TiO2 double-layer antireflection coatings10.1016/S0927-0248(02)00473-7 ↗
32. Anti-reflection (AR) coatings made by sol–gel processes: a review10.1016/S0927-0248(00)00365-2 ↗
33. Highly conductive and transparent PEDOT:PSS films with a fluorosurfactant for stretchable and flexible transparent electrodes10.1002/adfm.201101775 ↗
34. Solution processed vanadium pentoxide as charge extraction layer for organic solar cells10.1002/aenm.201100076 ↗
35. An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
36. Interface engineering of layer-by-layer stacked graphene anodes for high-performance organic solar cells10.1002/adma.201003673 ↗
37. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
38. Improved conductivity and mechanism of carrier transport in zinc oxide with embedded silver layer10.1063/1.2829788 ↗
39. n-Type transition metal oxide as a hole extraction layer in PbS quantum dot solar cells10.1021/nl2015729 ↗
40. High-efficiency inverted polymer solar cells with transparent and work-function tunable MoO3–Al composite film as cathode buffer layer10.1002/adma.201200238 ↗
41. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗