Optical and surface probe investigation of secondary phases in Cu 2 ZnSnS 4 films grown by electrochemical deposition
Source abstract
Abstract
Cu2ZnSnS4 (CZTS) films were grown by electrochemical deposition, and we measured the work function of the as-grown and of the KCN-etched CZTS surfaces by using Kelvin probe force microscopy (KPFM) and micro-Raman scattering spectroscopy with incident laser wavelengths of 488.0 and 632.8 nm, respectively, and the results indicate that a secondary phase formed at different depths. The KPFM measurements can discriminate phase uniformity at the nano-scale. Secondary phases, such as Cu2−xS (0<x<1), ZnS, and MoS2, were identified on the as-grown surface while Cu2−xS was removed from the KCN-etched surface. The KCN-etched CZTS absorption layer was measured to have a 5.0% conversion efficiency. Owing to the low cost of electrochemical deposition, it is desirable to obtain high tailored CZTS films can be obtained with the robust surface characteristics of a uniform work function with a single phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Compositional dependence of structural and electronic properties of Cu2ZnSn(S,Se)4 alloys for thin film solar cells10.1103/PhysRevB.83.125201 ↗
2. Crystal and electronic band structure of Cu2ZnSnX4 (X=S and Se) photovoltaic absorbers: first-principles insights10.1063/1.3074499 ↗
3. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
4. Fabrication of Cu2ZnSnS4 thin films by co-evaporation10.1002/pssc.200669631 ↗
5. Determination of band gap energy (Eg) of Cu2ZnSnSe4 thin films: on the discrepancies of reported band gap values10.1063/1.3457172 ↗
6. Device characteristics of CZTSSe thin-Film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
7. T. Kato, H. Hiroi, N. Sakai, S. Muraoka, H. Sugimoto, Characterization of front and back interfaces on Cu2ZnSnS4 thin-film solar cells, in: Proceeding of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012, 2236 pp.
8. Synthesis of Cu2ZnSnS4 thin films by a precursor solution paste for thin film solar cell applications10.1021/am401210w ↗
9. Pure sulfide Cu2ZnSnS4 thin film solar cells fabricated by preheating an electrodeposited metallic stack
10. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency10.1002/pip.2332 ↗
11. J.J. Scragg, Copper zinc tin sulfide thin films for photovoltaics: synthesis and characterization by electrochemical methods (Springer theses), 2011. 〈http://dx.doi.org/10.1007/978-3-642-22919-0〉.10.1007/978-3-642-22919-0 ↗
12. Preparation of Cu2ZnSnS4 thin films by sulfurization of co-electroplated Cu–Zn–Sn precursors10.1002/pssc.200881182 ↗
13. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS410.1063/1.3275796 ↗
14. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
15. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
16. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
17. Impact of KCN etching on the chemical and electronic surface structure of Cu2ZnSnS4 thin-film solar cell absorbers10.1063/1.3650717 ↗
18. Preparation of Cu2ZnSnS4 thin films via electrochemical deposition and rapid thermal annealing10.1016/j.tsf.2013.02.051 ↗
19. The effect of a heating rate on the properties of Cu2ZnSnS4 thin films solar cells10.1149/05051.0101ecst ↗
20. Highly efficient copper–zinc–tin–selenide (CZTSe) solar cells by electrodeposition10.1002/cssc.201301347 ↗
21. Kelvin probe force microscopy and its application10.1016/j.surfrep.2010.10.001 ↗
22. Scanning tunneling spectroscopy and Kelvin probe force microscopy investigation of Fermi energy level pinning mechanism on InAs and InGaAs clean surfaces10.1063/1.3462440 ↗
23. XPS depth profile study of CZTS thin films prepared by spray pyrolysis10.1002/pssc.201200796 ↗
24. Electronic structure of Cu2ZnSnS4 probed by soft x-ray emission and absorption spectroscopy10.1103/PhysRevB.84.035308 ↗
25. Native oxidation and Cu-poor surface structure of thin film Cu2ZnSnS4 solar cell absorbers10.1063/1.3637574 ↗
26. Growth and Raman scattering characterization of Cu2ZnSnS4 thin films10.1016/j.tsf.2008.11.031 ↗
27. Precursors' order effect on the properties of sulfurized Cu2ZnSnS4 thin films10.1088/0268-1242/24/10/105013 ↗
28. Secondary crystalline phases identification in Cu2ZnSnSe4 thin films: contributions from Raman scattering and photoluminescence10.1007/s10853-014-8446-2 ↗
29. Structural and optical properties of Cu2ZnSnS4 thin film absorbers from ZnS and Cu3SnS4 nanoparticle precursors10.1016/j.tsf.2012.10.034 ↗
30. The vibrational properties study of kesterite Cu2ZnSnS4 single crystals by using polarization dependent Raman spectroscopy10.1016/j.optmat.2012.09.031 ↗
31. Cu2ZnSnS4 thin film solar cells by fast co-evaporation10.1002/pip.976 ↗
32. Characterization and photoluminescence of PbS nanocubes synthesized by a solvothermal method
33. An investigation of band profile around the grain boundary of Cu(InGa)Se2 solar cell material by scanning probe microscopy10.1002/pip.1235 ↗
34. Nanoscale observation of surface potential and carrier transport in Cu2ZnSn(S,Se)4 thin films grown by sputtering-based two-step process10.1186/1556-276X-9-10 ↗
35. Photothermal signal and surface potential around grain boundaries in multicrystalline silicon solar cells investigated by scanning probe microscopy10.1143/APEX.5.022301 ↗
36. Surface photovoltage analysis of thin CdS layers on polycrystalline chalcopyrite absorber layers by Kelvin probe force microscopy10.1088/0957-4484/19/14/145705 ↗
37. Kelvin probe force microscopy on III–V semiconductors: the effect of surface defects on the local work function10.1016/S0921-5107(03)00020-5 ↗
38. First principles calculations of defect formation in In-free photovoltaic semiconductors Cu2ZnSnS4and Cu2ZnSnSe410.7567/JJAP.50.04DP07 ↗
39. Characterization of the ZnSe/CuGaSe2 interface using Kelvin probe force microscopy10.1557/PROC-668-H5.4 ↗
40. High resolution work function imaging of single grains of semiconductor surfaces10.1063/1.1471375 ↗
41. Amorphous silicon/polyaniline heterojunction solar cells: Fermi levels and open-vircuit voltages10.1016/j.jnoncrysol.2007.10.104 ↗
42. M. Gloeckler, A.L. Fahrenbruch, J.R. Sites, Numerical modeling of CIGS and CdTe solar cells: setting the baseline, in: Proceedings of the Third World Conference on Photovoltaic Energy Conversion, 2013, p. 491.
43. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell application10.1063/1.3587614 ↗
44. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
45. K. Timmo, M. Altosaar, J. Raudoja, M. Grossberg, M. D’Anilson, O. Volobujeva, E. Mellikov, Chemical etching of Cu2ZnSn(S,Se)4 monograin powder, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, HI, 2010, p. 001982.10.1109/PVSC.2010.5616411 ↗
46. Cu2ZnSnS4 solar cells grown by sulphurisation of sputtered metal precursors10.1016/j.tsf.2013.06.084 ↗
47. Kelvin probe force microscopy for the nano scale characterization of chalcopyrite solar cell materials and devices
48. Local built-in potential on grain boundary of Cu(In,Ga)Se2 thin films10.1063/1.1737796 ↗
49. Does the local built-in potential on grain boundaries of Cu(In,Ga)Se2 thin films benefit photovoltaic performance of the device?10.1063/1.1793346 ↗
50. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
51. Enhanced exciton separation through negative energy band bending at gain boundaries of Cu2ZnSnSe4 thin-films10.1063/1.3626848 ↗
52. Surface potential on grain boundaries and intragrains of highly efficient Cu2ZnSn(S,Se)4 thin-films grown by two-step sputtering process10.1016/j.solmat.2014.04.019 ↗