Extended description of tunnel junctions for distributed modeling of concentrator multi-junction solar cells
Source abstract
Abstract
One of the key components of highly efficient multi-junction concentrator solar cells is the tunnel junction interconnection. In this paper, an improved 3D distributed model is presented that considers real operation regimes in a tunnel junction. This advanced model is able to accurately simulate the operation of the solar cell at high concentraions at which the photogenerated current surpasses the peak current of the tunnel junctionl Simulations of dual-junction solar cells were carried out with the improved model to illustrate its capabilities and the results have been correlated with experimental data reported in the literature. These simulations show that under certain circumstances, the solar cells short circuit current may be slightly higher than the tunnel junction peak current without showing the characteristic dip in the J-V curve. This behavior is caused by the lateral current spreading toward dark regions, which occurs through the anode/p-barrier of the tunnel junction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Semiconductor Quantum Structures and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Photovoltaic concentration at the onset of its commercial deployment10.1002/pip.705 ↗
2. A 32.6% efficient lattice-matched dual-junction solar cell working at 1000 suns10.1063/1.3078817 ↗
3. R.R. King, A. Boca, W. Hang, L. X-Q, D. Bhusari, D. Larrabee, K. Edmondson, D. Law, C. Fetzer, S. Messopian, N. Karam, Band-gap-engineered architectures for high-efficiency multijunction concentrator solar cells, in: Twenty-fourth European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 21–25 September, 2009, pp. 55–61.
4. InGaP/GaAs/InGaAs 41% concentrator cells using bi-facial epigrowth
5. V. Andreev, E. Ionova, V. Larionov, V. Rumyantsev, M. Shvarts, G. Glenn, Tunnel Diode Revealing Peculiarities at I–V Measurements in Multijunction III–V Solar Cells, in: Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, vol. 1, 2006, pp. 799–802, doi:10.1109/WCPEC.2006.279577.10.1109/WCPEC.2006.279577 ↗
6. Localized irradiation effects on tunnel diode transitions in multi-junction concentrator solar cells10.1016/j.solmat.2009.04.022 ↗
7. A 3-D model for concentrator solar cells based on distributed circuit units10.1109/TED.2005.859620 ↗
8. Simulating III–V concentrator solar cells: a comparison of advantages and limitations of lumped analytical models, distributed analytical models and numerical simulations
9. K. Nishioka, T. Takamoto, W. Nakajima, T. Agui, M. Kaneiwa, Y. Uraoka, T. Fuyuki, Analysis of triple-junction solar cell under concentration by spice, in: Proceedings of 3rd World Conference on Photovoltaic Energy Conversion, vol. 1, 2003, pp. 869–872.
10. Tunnel diode modeling, including nonlocal trap-assisted tunneling: a focus on III–V multijunction solar cell simulation10.1109/TED.2010.2061771 ↗
11. Numerical simulation of tunnel diodes for multi-junction solar cells10.1002/pip.824 ↗
12. Simulation of nonuniform irradiance in multijunction IIIV solar cells
13. Sze · 1981