journal article·2018-03

The effect of incidence angle on the reflectance of solar mirrors

Florian Sutter, Marco Montecchi, Haymo von Dahlen, Aránzazu Fernández-García, Marc Röger

Publisher page

Abstract

Abstract Solar reflectors for Concentrating Solar Technologies require a high reflectance in the terrestrial solar spectrum (280–4000 nm). Besides the wavelength, the reflectance of solar mirror materials is also dependent on the incidence angle of the incoming sunlight. The commonly used measurement equipment measures the reflectance at fixed near-normal incidence angles, typically between 8° and 15°. In this work, the annual incidence angle frequency distribution has been calculated for a LS3/Eurotrough-type parabolic-trough collector located at different sites, and for the heliostat field of the solar tower system CESA-1 located at the Plataforma Solar de Almeria in Tabernas, southern Spain. It was found that the most frequent incidence angles registered in the solar field are quite higher than the ones at which reflectance is measured with state of the art instruments, obtaining mean incidence angles in the range of 28–35° depending on the type and location of the solar field. A methodology to predict the off-normal reflectance of silvered-glass mirrors based on near-normal reflectance and transmittance measurements of the uncoated glass is presented. The complex refractive index of 2, 4 and 5 mm thick solar glass and the deposited silver was determined and used to model the solar weighted reflectance of silvered-glass mirrors at different incidence angles. The model was compared to experimental measurements. For this purpose, the Spectral Specular Reflectometer (S2R) has been improved and updated with a polarizer crystal to measure reflectance at perpendicular (s-pol) and parallel (p-pol) polarizations up to incidence angles of θ = 70°. Eight solar mirror materials (three silvered-glass mirrors of different glass thicknesses, two anti-soiling coated glass mirrors, two enhanced aluminum reflectors and a silvered polymer film) have been measured over a broad range of incidence angles and the results have been weighted with the annual incidence angle frequency distribution. The obtained incidence angle-weighted reflectance is a suited parameter to compare the efficiency of solar mirror materials taking into account their use in a specific collector type and location.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar Radiation and Photovoltaics · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Performance evaluation of concentrating solar photovoltaic and photovoltaic/thermal systems10.1016/j.solener.2013.09.029 ↗
2. Advances in solar thermal electricity technology10.1016/S0038-092X(03)00102-6 ↗
3. Nitriding VI-group metals (Cr, Mo and W) in stream of NH3 gas under concentrated solar irradiation in a solar furnace at PSA (Plataforma Solar de Almería)10.1016/j.solener.2015.01.028 ↗
4. Parabolic-Trough solar collectors and their applications10.1016/j.rser.2010.03.012 ↗
5. ISO 9488 · 1999
6. Meyen · 2013 · Version 2.5
7. UNE 206009, Solar thermal electric plants – Terminology. Madrid: Spanish Asociation for Normalization and Certification (in Spanish, Asociación Española de Normalización y Certificación, AENOR), 2013.
8. ASTM G173−03 · 2003
9. ISO 9845−1 · 1992
10. Characterization of reflected beam profile of solar mirror materials10.1016/0038-092X(77)90036-6 ↗
11. Development of a spatially resolved reflectometer to monitor corrosion of solar reflectors10.1016/j.optmat.2013.04.013 ↗
12. M. Bobinecz, Ivanpah Solar Electric Generating Facility. in: Proceedings of the Engineering and Construction Contracting Conference, San Antonio, 2012.
13. J. Crawford, J. Steward, J. Asensio Pérez-Ullivarri, A comparison of three portable reflectometers for use in operations and maintenance of CSP plants. in: Proceedings of the SolarPACES Conference, Marrakesh, 2012.
14. R. Pettit, Characterizing Solar Mirror Materials Using Portable Reflectometer. Sandia Report, SAND82-1714, Albuquerque, 1982.10.2172/6718528 ↗
15. Upgrading of ENEA solar mirror qualification set-up10.1016/j.egypro.2014.03.228 ↗
16. A new instrument for measuring the reflectance distribution function of solar reflector materials10.1016/j.egypro.2014.03.227 ↗
17. Angle resolved specular reflectance measured with VLABS10.1016/j.egypro.2015.03.173 ↗
18. Equipment and methods for measuring reflectance of concentrating solar reflector materials10.1016/j.solmat.2017.03.036 ↗
19. Reflectometer comparison for assessment of back-silvered glass solar mirrors10.1016/j.solener.2017.06.053 ↗
20. Incidence-angle modifier and average optical efficiency of parabolic trough collectors10.1115/1.3266115 ↗
21. The astronomical Almanac's algorithm for approximate solar position (1950–2050)10.1016/0038-092X(88)90045-X ↗
22. V. Quaschning: Regenerative Energiesysteme: Technologie-Berechnung-Simulation. 7. Aufl.München: Hanser, p. 138 f, ISBN 978-3-446-42732-7.
23. A new fast ray tracing tool for high-precision simulation of Heliostat fields
24. Complex refractive index of a slab from reflectance and transmittance: analytical solution10.1088/1464-4258/4/4/306 ↗
25. Optical properties of metallic films for vertical-cavity optoelectronic devices10.1364/AO.37.005271 ↗
26. Palik · 1998 · 1
27. Pedrotti · 2005
28. Spectral characterization of specular reflectance of solar mirrors
29. M. Montecchi, Proposal of a New Parameter for the Comprehensive Qualification of Solar Mirrors for CSP Applications. in: Proceedings of the AIP Conference 1734, 130014; http://dx.doi.org/10.1063/1.4949224, 2016.10.1063/1.4949224 ↗
30. Approximated method for modelling hemispherical reflectance and evaluating near-specular reflectance of CSP mirrors10.1016/j.solener.2013.03.014 ↗
31. Durability testing of silvered-glass mirrors10.1016/j.egypro.2015.03.110 ↗
32. Modelling of optical durability of enhanced aluminum reflectors10.1016/j.solmat.2012.07.027 ↗
33. A. Fernández-García, F. Sutter, A. Heimsath, M. Montecchi, F. Sallaberry, A. Peña-Lapuente, C. Delord, L. Martínez-Arcos, T. Reche-Navarro, T. Schmid, C. Heras, Simplified analysis of solar weighted specular reflectance for mirrors with high specularity, in: Proceedings of the AIP Conference 1734, 130006; http://dx.doi.org/10.1063/1.4949216, 2016.10.1063/1.4949216 ↗