journal article·2017-07

Stability of CIGS solar cells under illumination with damp heat and dry heat: A comparison

Mirjam Theelen, Kyo Beyeler, Henk Steijvers, Nicolas Barreau

Publisher page

Abstract

Unencapsulated CIGS solar cells were simultaneously exposed to either dry or damp heat combined illumination. In-situ monitoring of their electrical parameters demonstrated a rapid decrease of the efficiency for the solar cells exposed to damp heat plus illumination. This decrease was mainly driven by changes in the shunt resistances, affecting also the open circuit voltage and fill factor, while a minor increase in series resistance was also observed. The solar cells exposed to dry heat plus illumination were almost stable during the exposure. The solar cells were studied before and after exposure in order to investigate their material changes. For the dry heat illumination samples, the visual characteristics remained unchanged, while for the damp heat illumination samples, spots that were likely shunted, were observed. For these solar cells, SIMS showed the migration of sodium, likely leading to changes in the shunt resistance and output voltage. A similar, but less severe migration effect was observed for potassium, so this element might also have a small, but comparable role. Migration of hydroxide, likely caused by water ingression, was also observed and probably affected the conductivity of the ZnO:Al front contact. The migration of sodium and hydroxide was especially strong on the spot locations. These changes were not observed for the dry heat illumination samples. From these experiments, it was concluded that unencapsulated CIGS solar cells can degrade rapidly in the presence of humidity, but in the absence of water, these solar cells were stable even under high temperatures and illumination intensities.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Stability of Cu(In,Ga)Se2 solar cells: a literature review10.1016/j.solener.2016.04.010 ↗
2. Damp heat-induced sulfate formation in Cu(ln,Ga)(S,Se)2-based thin solar cells10.1063/1.1525884 ↗
3. Effects of ZnO: al film on CIGS PV modules degradation under accelerated damp heat10.1016/j.solmat.2012.05.002 ↗
4. P.Westin, P.Neretnieks, M.Edoff, Damp heat degradation of CIGS-based PV modules, in: Proceedings of the 21st EUPVSEC, 2006, 2470–2473.
5. A study of the influence of the Ga content on the long-term stability of Cu(In,Ga)Se2 thin film solar cells10.1016/S0040-6090(03)00185-8 ↗
6. The impact of alkali elements on the degradation of CIGS solar cells10.1002/pip.2610 ↗
7. M. Theelen, N. Barreau, H. Steijvers, V. Hans, Z. Vroon, M. Zeman, Degradation of CIGS solar cells due to the migration of alkali elements, in: Proceedings of the 42th IEEE PVSC, 2015, pp. 1-610.1109/PVSC.2015.7355776 ↗
8. M. Theelen, N. Barreau, F. Daume, H. Steijvers, V. Hans, A. Liakopoulou, Z. Vroon, M. Zeman, Accelerated performance degradation of CIGS solar cell determined by in-situ monitoring, in: Proceedings of the SPIE, vol. 9179, 2014, 91790110.1117/12.2059951 ↗
9. Re-investigation of preferential orientation of Cu(In,Ga)Se2thin films grown by the three-stage process10.1002/pip.1079 ↗
10. The effect of damp heat – illumination exposure on CIGS solar cells: a combined XRD and electrical characterization study10.1016/j.solmat.2016.07.051 ↗
11. M.Theelen, A.Liakopoulou, F.Daume, V.Hans, H.Steijvers, N.Barreau, M.Tomassini, Z.Vroon, M.Zeman, Temperature Dependency of CIGS solar cells on soda lime glass and polyimide: a comparison – submitted to Journal of Renewable and Sustainable Energy
12. M.Theelen, H.Steijvers, N.Barreau, M.Buffière, G.Brammertz, M.Flammini, R.V.Vugt, Z.Vroon, M.Zeman, In-situ monitoring of the accelerated performance degradation of thin film solar cells, Proceedings of the 42th IEEE PVSC, 2015, 1–610.1109/PVSC.2015.7355639 ↗
13. K.Ramanathan, M.Contreras, J.Tuttle, J.Keane, J.Webb, S.Asher, D.Niles, R.Dhere, A.Tennant, F.Hasoon, R.Noufi, Effect of heat treatments and window layer processing on the characteristics of CulnGaSe2 thin film solar cells, in: Proceedings of the 25th IEEE PVSC, 1996, 837–84010.1109/PVSC.1996.564258 ↗
14. M.Theelen, M.Tomassini, H.Steijvers, Z.Vroon, N.Barreau, M.Zeman, In-situAnalysis of the Degradation of Cu(In,Ga)Se2 Solar Cells, in: Proceedings 39th IEEE PVSC, 2013, 2047–205110.1109/PVSC.2013.6744875 ↗
15. Physical and chemical degradation behavior of sputtered aluminum doped zinc oxide layers, for Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2013.10.149 ↗
16. R.Feist, S.Rozeveld, M.Mushrush, R.Haley, B.Lemon, J.Gerbi, B.Nichols, R.Nilsson, T.Richardson, S.Sprague, R.Tesch, S.Torka, C.Wood, S.Wu, S.Yeung, M.Bernius, Examination of lifetime-limiting failure mechanisms in CIGSS-based PV minimodules under environmental stress, in: Proceedings of the 33rd IEEE PVSC, 2008, 1–510.1109/PVSC.2008.4922579 ↗
17. Reliability of sputter deposited aluminum-doped zinc oxide under harsh environmental conditions10.1016/j.solener.2012.12.006 ↗
18. Influence of Mo/MoSe2 microstructure on the damp heat stability of the Cu(In,Ga)Se2 back contact molybdenum10.1016/j.tsf.2016.06.028 ↗
19. J.Wennerberg, J.Kessler, L.Stolt, Degradation mechanisms of Cu(In,Ga)Se2-based thin film PV modules, in: Proceedings of the 16th EUPVSEC, 2000, 309–312
20. Life prediction for CIGS solar modules part 1: modeling moisture ingress and degradation10.1002/pip.1172 ↗
21. Effect of light illumination during damp/dry heat tests on a flexible thin film photovoltaic module10.1117/12.2187891 ↗
22. Bias and irradiation dependency of CIGS module reliability during heat tests