journal article·2011-12

Improved the efficiency of small molecule organic solar cell by double anode buffer layers

Chien-Jung Huang, Jhong-Ciao Ke, Wen-Ray Chen, Teen-Hang Meen, Cheng-Fu Yang

Publisher page

Abstract

Abstract Small molecule organic solar cell with an optimized hybrid planar-mixed molecular heterojunction (PM-HJ) structure of indium tin oxide (ITO)/ poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) doped with 4 wt% sorbitol/ pentacene (2 nm)/ copper phthalocyanine (CuPc) (10 nm)/ CuPc: C 60 mixed (20 nm)/ fullerene (C 60 ) (20 nm)/ bathocuproine (BCP) (10 nm)/Al was fabricated. PEDOT: PSS layer doped with 4 wt% sorbitol and pentacene layer were used as interlayers between the ITO anode and CuPc layer to help the hole transport. And then the short-circuit current ( J sc ) of solar cell was enhanced by inserting both the PEDOT: PSS (4 wt% sorbitol) and the pentacene, resulting in a 400% enhancement in power conversion efficiency (PCE). The maximum PCE of 3.9% was obtained under 1sun standard AM1.5G solar illumination of 100 mW/cm 2 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
2. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
3. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
4. Large area plastic solar cell modules10.1016/j.mseb.2006.06.008 ↗
5. Reel-to- reel wet coating as an efficient up-scaling technique for the production of bulk–heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
6. Very-high-efficiency double-heterostructure copper phthalocyanine/C60 photovoltaic cells10.1063/1.1384001 ↗
7. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
8. 4.2% efficient organic photovoltaic cells with low series resistances10.1063/1.1713036 ↗
9. Mixed donor–acceptor molecular heterojunctions for photovoltaic applications. II. Device performance10.1063/1.2142073 ↗
10. Influence of molecular architecture and intermixing on the photovoltaic, morphological and spectroscopic properties of CuPc–C60 heterojunctions10.1016/j.solmat.2004.02.027 ↗
11. Ultra-thin metal layer passivation of the transparent conductive anode in organic solar cells10.1016/j.solmat.2008.06.016 ↗
12. SnPc:C60 bulk heterojunction organic photovoltaic cells with MoO3 interlayer
13. Effect of buffer layers on the performance of organic photovoltaiccells based on copper phthalocyanine and C6010.1016/j.solmat.2009.09.012 ↗
14. Effect of electron transport layer materials on the performance of copper phthalocyanine/fullerene heterojunction with function of organic solar cells10.1016/j.jnoncrysol.2010.06.022 ↗
15. Investigation of the effects of doping and post-deposition treatmensts on the conductivity, morphology, and work function of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) films10.1002/adfm.200400073 ↗
16. The effects of solvents on the morphology and sheet resistance in poly(3,4-ethylenedioxythiophene)-polystyrenesulfonic acid (PEDOT-PSS) films10.1016/S0379-6779(02)01259-6 ↗
17. organic based flexible speaker through enhanced conductivity of PEDOT/PSS with various solvents10.1016/S0379-6779(02)01026-3 ↗
18. High-conductivity poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗