A look into the origin of shunt leakage current of Cu(In,Ga)Se2 solar cells via experimental and simulation methods
Source abstract
Abstract
This study investigates how to apply space-charge-limited (SCL) current to describe shunt leakage current in a CIGS solar cell. Possible factors inducing SCL current have been observed through conductive atomic force microscopy (C-AFM), which supports the SCL current theory, describing the shunt current of a CIGS solar cell. In simulations derived from experimental data, deviation of dark IV curves is due to flaws in the real device. These flaws are absent in simulation, but investigation verifies the characteristics of SCL current component's experimental IV curves within shunt leakage current. A device with a metal/CIGS/metal structure could simulate SCL current and confirm its characteristics. Such a simulated structure, representing flaws inserted into a CIGS solar cell, generates the same dark-current behavior revealed in experimental dark IV curves. This study investigates the response of dark current to varying sizes of the flaw within the CIGS solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
2. W.N. Shafarman, L. Stolt, Cu(InGa)Se2 Solar Cells, in: A. Luque, S. Hegedus (Eds.), Handbook of Photovoltaic Science and Engineering, John Wiley Sons, The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, United Kingdom, 2003, pp. 567–616.10.1002/0470014008.ch13 ↗
3. Progress in polycrystalline thin-film Cu(In,Ga)Se2 solar cells
4. Scale-up issues of CIGS thin film PV modules10.1016/j.solmat.2010.02.019 ↗
5. Non-linear shunt paths in thin-film Cd–Te Solar Cells10.1063/1.1856216 ↗
6. Universality of non-Ohmic shunt leakage in thin-film solar cells10.1063/1.3518509 ↗
7. Volume-controlled current injection in insulators10.1088/0034-4885/27/1/307 ↗
8. Simplified theory of space-charge-limited currents in an insulator with traps10.1103/PhysRev.103.1648 ↗
9. Space-charge-limited currents in solids10.1103/PhysRev.97.1538 ↗
10. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
11. ASTMG173-03, Standard Tables for Reference Solar Spectral Irradiances, ASTM International, West Conshohocken, Pennsylvania, 2003, 10.1520/G0173-03E01, www.astm.org.
12. Solar cell calibration methods10.1016/0379-6787(89)90054-9 ↗
13. M.A. Contreras, J. Tuttle, A. Gabor, A. Tennant, K. Ramanathan, S. Asher, A. Franz, J. Keane, L. Wang, J. Scofield, R. Noufi, High efficiency of Cu(In,Ga)Se2-based solar cells: processing of novel absorber structures, in: Proceeding of the 24th PVSC and WCPEC 1, 1994, pp. 68–75.
14. 16.4% Total-area conversion efficiency thin-film polycrystalline MgF2/ZnO/CdS/Cu(In,Ga)Se2/Mo solar cell10.1002/pip.4670020404 ↗
15. Microstructural characterization of Cu(In,Ga)Se2 surface layer10.1016/j.tsf.2011.11.077 ↗
16. Deposition-temperature effects on AZO thin films prepared by RF magnetron sputtering and their physical properties
17. Current transport in copper indium gallium diselenide solar cells comparing mesa diodes to the full cell10.1016/S0927-0248(02)00349-5 ↗