journal article·2010-11

Properties of n-type polycrystalline silicon solar cells formed by aluminium induced crystallization and CVD thickening

Ö. Tüzün, Y. Qiu, A. Slaoui, I. Gordon, C. Maurice, S. Venkatachalam, S. Chatterjee, G. Beaucarne, J. Poortmans

Publisher page

Abstract

Abstract Large-grained, n + n-type polycrystalline silicon (poly-Si) films were obtained on alumina substrates by combining the aluminium induced crystallization (AIC) process of amorphous silicon and chemical vapour deposition (LPCVD) at high temperature (1000 °C) for the epitaxial thickening. The n + seed layer was obtained by phosphorus doping of the AIC layer. The electron backscattering diffraction (EBSD) technique was used for the crystallographic analysis of the poly-Si thin films. Seed layers with an average grain size of 7.6 μm were obtained on alumina substrates by exchange annealing at 475 °C for 6 h. Heterojunction emitter (HJE) solar cells were fabricated on such layers and their characteristics were monitored. IQE measurements show that n-type material based solar cells led to a much higher current collection over a large part of the spectrum compared to p-type cells. Accordingly a high effective diffusion length of about 2 μm for n-type heterojunction solar cells was obtained while it is about 0.9 μm for the p-type cell. As a result, the first n-type solar cells showed efficiencies above 5%, which is a very promising result considering that no optimization nor texturing have been applied so far.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.