journal article·2011-11

Anodic bonding of activated tin solder alloys in the liquid state: A novel large-area hermetic glass sealing method

Matthias M. Koebel, Nancy El Hawi, Jia Lu, Felix Gattiker, Jürg Neuenschwander

Publisher page

Abstract

Abstract A new variant of the anodic bonding technique (ALTSAB: Activated Liquid Tin Solder Anodic Bonding) is described, which offers a number of advantages for direct glass to metal sealing over conventional methods. It employs a tin solder alloy containing an activating metal which is anodically bonded to alkali rich glass substrates in the liquid state. Two different test specimens were fabricated and characterized under vacuum at a pressure of 5×10 −4 mbar and a bonding temperature of 300 °C and compared with standard Al/glass anodic bonds. The ability to fabricate dual interface bonds of good quality and high shear strength >16 MPa by the ALTSAB method was demonstrated. With the sealant metal in the liquid state, this methodology promises superior surface adaptation and therefore joint performance when compared with the standard anodic bonding. More importantly, there is no need for premetallization or surface pretreatment of the glass substrates, and unlike in conventional anodic bonding, there is no need for mechanically loading the joining assembly. Wetting of the float glass substrates by the activated solder alloy SnAl0.6 after successful anodic bonding was confirmed by optical microscopy. The enrichment of the activating element Al at the bonding interface was confirmed by SEM and EDS element mapping. The methodology presented here shows great promise for various large-area sealing applications, particularly vacuum glazing, thin film and organic PV and OLED technology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Safely mounting glass viewports to elastomer sealed vacuum flanges10.1116/1.3442803 ↗
2. Contact seals for airtight stationary detachable joints10.1023/A:1023334513513 ↗
3. Laboratory thin-film encapsulation of air-sensitive organic semiconductor devices10.1109/TED.2009.2034804 ↗
4. Flexible active-matrix OLED displays: challenges and progress10.1889/1.2835025 ↗
5. Key near-term R&D issues for continuous improvement in CIS-based thin-film PV modules10.1016/j.solmat.2008.11.063 ↗
6. Wafer level hermetic package and device testing of a SOI-MEMS switch for biomedical applications10.1088/0960-1317/16/4/002 ↗
7. The fabrication of polymer microfluidic devices using a solid-to-solid interfacial polyaddition10.1016/j.polymer.2009.09.053 ↗
8. Service-life limitations in vacuum glazing: a transient pressure balance model10.1016/j.solmat.2010.02.003 ↗
9. Partridge · 1949
10. Glass to metal joints10.1021/ja01452a008 ↗
11. The preparation of mirrors by sputtering metals on to glass surfaces10.1088/0950-7671/7/6/304 ↗
12. Holland · 1956
13. Aerosol science and technology
14. Fluxless hermetic lid sealing using electroplated Sn-rich solder10.1109/TCAPT.2008.922000 ↗
15. Field assisted glass–metal sealing10.1063/1.1657121 ↗
16. Rate processes during anodic bonding10.1111/j.1151-2916.1992.tb05483.x ↗
17. Bonding properties of metals anodically bonded to glass10.1016/j.sna.2003.10.070 ↗
18. Selection of glass, anodic bonding conditions and material compatibility for silicon-glass capacitive sensors10.1016/0924-4247(94)00872-F ↗
19. Anodic bonding of evaporated glass structured with lift-off technology for hermetical sealing10.1016/S0924-4247(00)00300-9 ↗
20. Effect of silicon oxide, silicon nitride and polysilicon layers on the electrostatic pressure during anodic bonding10.1016/S0924-4247(97)01739-1 ↗
21. Low-temperature anodic bonding to silicon nitride10.1016/S0924-4247(99)00372-6 ↗
22. Interfacial microstructure of anodic-bonded Al/glass
23. Field-assisted diffusion bonding and bond characterization of glass to aluminum10.1007/s10853-008-2583-4 ↗
24. Ion drift processes in pyrex-type alkali-borosilicate glass during anodic bonding10.1149/1.1838553 ↗
25. Anodic bonding of glass to aluminium10.1007/s00542-005-0040-8 ↗
26. Vacuum packaging technology using localized aluminum/silicon-to-glass bonding10.1109/JMEMS.2002.802903 ↗
27. D.I. Pomerantz, G. Wallis, Anodic bonding of liquid metals to insulators, US Patent No 3470348, 1969.
28. Models of ionic transport for silicon-glass anodic bonding10.1149/1.2988127 ↗
29. Special-purpose epoxy adhesives10.1134/S1811238207010043 ↗