Spatially distributed model for the analysis of laser beam induced current (LBIC) measurements of thin film silicon solar modules
Source abstract
Abstract
Abstract A 3D distributed model is developed and implemented based on circuit analysis software for the investigation of spatial variation in performance due to the distributed nature and non-uniformity of solar cell properties. This is applied to LBIC measurements where it is used for sensitivity analysis of the measurements with respect to certain parameters in series connected thin film PV modules. The model is used to explain the differences in dark and illuminated measurements, which clearly shows the illuminated LBIC signal is largely dependent on the homogeneity of the background illumination. The dark LBIC is largely affected by the shunt resistance of the neighbouring cells rather than by the signal strength of the cell under test. It is required to bring the cell into limiting conditions, which then gives a signal one order of magnitude stronger than that in the non-limiting case. The simulations are validated against measurements taken in these regimes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Multi-laser LBIC system for thin film PV module characterisation10.1016/j.solmat.2008.10.019 ↗
2. Laser scanning of amorphous silicon photovoltaic modules with different bias conditions
3. Extraction of individual-cell photocurrents and shunt resistances in encapsulated modules using large-scale laser scanning10.1002/(SICI)1099-159X(199601/02)4:1<63::AID-PIP112>3.0.CO;2-R ↗
4. Matson, R.J., K.A. Emery, I.L. Eisgruber, and L.L. Kazmerski. The large-scale scanner: milli-characterisation of photovoltaic devices and modules, in: Proceedings of the 12th European Photovoltaic Solar Energy Conference, 1994, Amsterdam, The Netherlands, pp. 1222–1225.
5. Eisgruber, I.L., R.J. Matson, J.R. Site, and K.A. Emery. Interpretation of laser scans from thin-film polycrystalline photovoltaic modules, in: Proceedings of the 1st World Conference on Photovoltaic Energy Conversion, 1994, Hawaii, USA, pp. 271–27410.1109/WCPEC.1994.519863 ↗
6. Modeling of spatially inhomogeneous solar cells by a multi-diode approach
7. Monokroussos, C., P. Vorasayan, T.R. Betts, R. Gottschalg, and A.N. Tiwari Investigating the performance losses of a-Si:H solar cells based on an electro-optical modelling approach. in: Proceedings of the 23st European Photovoltaic Solar Energy Conference, 2008, Valencia, Spain, pp. 2428–2433.
8. A detailed study of monolithic contacts and electrical losses in a large-area thin-film module10.1002/pip.589 ↗
9. Simulation of losses in thin-film silicon modules for different configurations and front contacts10.1002/pip.831 ↗
10. Nishioka, K., T. Takamoto, W. Nakajima, T. Agui, M. Kaneiwa, Y. Uraoka, and T. Fuyuki. Analysis of triple-junction solar cell under concentration by spice, in: Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, 2003 Osaka, Japan, pp. 869–872.
11. Foss, S.E., B.R. Olaisen, E.S. Marsten, and A. Holt. A new 2.5D distributed spice model of solar cells, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, 2006, Dresden, Germany, pp. 430–434.
12. Grote, D., M. Kasemann, M. Hermle, and W. Warta. Analysing lateral inhomogeneities of silicon solar cells using a quasi 3D circuit simulation tool based on spice, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference and Exhibition, 2007, Milan, Italy, pp. 305–309.
13. A 3D model for concentrator solar cells based on distributed circuit units10.1109/TED.2005.859620 ↗
14. Smith, M., 〈http://www.winspice.com/〉.