High emissivity coatings based on polysilazanes for flexible Cu(In,Ga)Se2 thin-film solar cells
Source abstract
Abstract
Abstract Flexible Cu(In,Ga)Se2 (CIGSe) thin-film solar cells have received much attention for power generation in space applications. This is due to their superior radiation hardness and a high specific power. A significant drawback lies in the low emissivity e of the CIGSe solar cells, which leads to an increase in the cell temperature during operation in space and a decrease in the efficiency. To overcome this problem, optical coatings like SiO2 or Al2O3, that provide high emissivity, have to be applied on the solar cells. It is well known, that silica-like coatings can be formed at relatively low temperatures by the use of polysilazanes. Thus, this paper reports on the development, processing and characterisation of high emissivity coatings based on the polysilazanes PHPS and HTTS for flexible CIGSe thin-film solar cells. Therefore, the conversion behaviour, the coating properties like the coating thickness and microstructure, the solar absorbance as well as the emissivity of coated cells were investigated. The ability as high-e coatings could be proved by optical reflection measurements showing a significant increase of the emissivity from 0.34 for an uncoated CIGSe cell to 0.78 for a HTTS-coated solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · solar cell performance optimization · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Thin-film solar cells: an overview10.1002/pip.541 ↗
2. Chapter IC-3–Cu(In,Ga)Se2 thin-film solar cells10.1016/B978-0-12-386964-7.00009-3 ↗
3. High-efficiency Cu(In,Ga)Se2 cells and modules10.1016/j.solmat.2013.05.002 ↗
4. Optical and solar cell properties of alpha-ray, proton and gamma-ray irradiated Cu(In,Ga)Se2 thin films and solar cells10.1143/JJAP.49.042302 ↗
5. A.N. Tiwari, Thin Films and Photovoltaics, 〈http://www.empa.ch/tfpv〉.
6. C.A. Kaufmann, R. Caballero, R. Klenk, H.-W. Schock, K. Zajac, S. Brunner, A. Rahm, C. Scheit, H. Zachmann, A. Braun, K. Otte, R. Würz, F. Kessler, P. Schülke, Recent results from the German joint project flexible CIGSe thin-film solar cells for space applications, in: G.F. de Santi (Ed.), in: 25th European Photovoltaic Solar Energy Conference and Exhibition/5th World Conference on Photovoltaic Energy Conversion, EU PVSEC, Munich, Germany, 2010, pp. 2849–2853.
7. Flexible Cu(In,Ga)Se2 thin-film solar cells for space application10.1016/j.tsf.2005.11.068 ↗
8. D. Herrmann, F. Kessler, M. Powalla, M. Kroon, G. Oomen, Flexible and lightweight Cu(In,Ga)Se2 thin-film solar cells for space applications, in: W. Palz, H.A. Ossenbrink, P. Helm (Eds.), Proceedings of the 20th European Photovoltaic Solar Energy Conference, Barcelona, 2005, pp. 98–101.
9. G.L. Oomen, J.L. Linden, P.A. van Nijnatten, Development of a thin, high-emissivity coating, in: Proceedings of the Seventh European Space Power Conference, Stresa, 2005, pp. 293–297.
10. SiO2 and Al2O3/SiO2 coatings for increasing emissivity of Cu(In,Ga)Se2 thin-film solar cells for space applications10.1016/j.tsf.2007.07.159 ↗
11. Colombo · 2009
12. Silicon-based polymer-derived ceramics: synthesis properties and applications—a review10.2109/jcersj.114.425 ↗
13. Polymer derived engineering ceramics10.1002/1527-2648(200006)2:6<339::AID-ADEM339>3.0.CO;2-K ↗
14. Polysilazane precursors to advanced ceramics
15. Conversion of perhydropolysilazane-to-silica thin films by exposure to vapour from aqueous ammonia at room temperature10.2109/jcersj.114.517 ↗
16. Polysilazane as the source of silica: the formation of dense silica coatings at room temperature and the new route to organic–inorganic hybrids10.1007/s10971-008-1793-1 ↗
17. Preparation of moisture curable polysilazane coatings Part I. Elucidation of low temperature curing kinetics by FT-IR spectroscopy10.1016/j.porgcoat.2005.02.006 ↗
18. Perhydropolysilazane derived silica protecting Kapton from atomic oxygen attack10.1016/j.tsf.2011.10.011 ↗
19. A technique for converting perhydropolysilazane to SiOx at low temperature10.1149/1.3264092 ↗
20. Formation of silica from perhydropolysilazane using vacuum ultraviolet excimer lamp10.2109/jcersj.112.599 ↗
21. Conversion of perhydropolysilazane into a SiOx network triggered by vacuum ultraviolet irradiation: access to flexible, transparent barrier coatings10.1002/chem.200700351 ↗
22. Thin gas-barrier silica layers from perhydropolysilazane obtained through low temperature curings: a comparative study10.1016/j.tsf.2012.09.065 ↗
23. Control of surface energy of silicon oxynitride films10.1021/la304307y ↗
24. Conversion behaviour and resulting mechanical properties of polysilazane-based coatings10.1016/j.jeurceramsoc.2011.09.005 ↗
25. Advanced coatings on the basis of Si(C)N precursors for protection of steel against oxidation10.1016/j.jeurceramsoc.2008.11.013 ↗
26. Effect of ambient atmosphere on crosslinking of polysilazanes10.1002/app.32777 ↗
27. European Patent 12006145 (2012).
28. High-yield synthesis of Si3N4/SiC ceramic materials by pyrolysis of a novel polyorganosilazane10.1111/j.1151-2916.1984.tb19620.x ↗
29. Standard ECSS-Q-ST-70-09C (2008).
30. The conversion of perhydropolysilazane into SiON films characterized by X-ray photoelectron spectroscopy10.1111/jace.12045 ↗
31. Landau · Acta Physiochim. U.R.S.S. · 1942 · 17 · 45
32. Brinker · 1990
33. Synthesis of silicon carbide thin films with polycarbosilanes (PCS)10.1111/j.1151-2916.1997.tb03124.x ↗
34. High emissivity coatings for high temperature application: progress and prospect10.1016/j.tsf.2009.03.175 ↗