High throughput via-metallization technique for multi-crystalline metal wrap through (MWT) silicon solar cells exceeding 16% efficiency
Source abstract
Abstract
On the way to higher efficiencies, back contact solar cells seem to be very promising. Especially, the metal wrap through (MWT) solar cell concept, with only three additional process steps when compared to conventionally processed cells, is appropriate for a fast transfer to industry. Hence, a pilot-line process based on a modified via-metallization step was set up. Therefore, a newly developed short suction step directly after the screen-printing process was established and characterized. Using this new via-metallization technique, cell efficiencies over 16% are reached on a multi-crystalline silicon (mc-Si) material. Compared with conventionally processed cells, an efficiency gain of 0.5% absolute is observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. E. van Kerschaver, et al., A novel silicon solar cell structure with both external polarity contacts on the back surface, in: Proceedings of the 2nd World Conference on Photovoltaic Energy Conversion, Vienna, Austria, 1998, pp. 1479–1482.
2. F. Clement, et al., Processing and comprehensive characterisation of screen-printed mc-Si metal wrap through (MWT) solar cells, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, pp. 1399–1402.
3. I. Romijn, et al., Aspire: a new industrial MWT cell technology enabling high efficiencies on thin and large mc-Si wafers, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, pp. 1043–1049.
4. F. Dross et al., High-efficiency (average 16.0%) industrial-type rear-contactes multicrystalline silicon solar cells, in: Technical Digest of the 17th International Photovoltaic Solar Energy Conference, Fukuoka, Japan, 2007, pp. 410–411.
5. N. Nakatani, et al., High efficiency multicrystalline silicon back-contact solar cells, in: Technical Digest of the 17th International Photovoltaic Solar Energy Conference, Fukuoka, Japan, 2007, pp. 401–403.
6. Large area metallization wrap through solar cells using electroless plating10.1016/j.solmat.2006.06.047 ↗
7. I.G. Romijn, et al., An overview of MWT cells and evolution to aspire concept: a new integrated mc-Si cell and module design for high efficiencies, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain, 2008.
8. Back-contact solar cells: a review10.1002/pip.657 ↗
9. M. Späth, et al., A novel module assembly line using back contact solar cells, in: Technical Digest of the17th International Photovoltaic Solar Energy Conference, Fukuoka, Japan, 2007, p. 436.
10. M.N. van den Donker, et al., The starfire project: towards in-line mass production of thin high efficiency back-contacted multicrystalline silicon solar cells, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain, 2008.
11. D. Biro, et al., Pv-Tec: photovoltaic technology evaluation center-design and implementation of a production research unit, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, Germany, 2006, pp. 621–624.
12. F. Dross, et al., Impact of rear-surface passivation on MWT performances, in: Proceedings of the 4th World Conference on Photovoltaic Energy Conversion, Hawaii, USA, 2006, pp. 1291–1294.10.1109/WCPEC.2006.279650 ↗
13. E. van Kerschaver, et al., Screen printed metallisation wrap through solar cells, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, UK, 2000, pp. 1517–1520.
14. A.A. Mewe, et al., MWT ‘plug’ metallization: improved performance and process stability of pum and aspire cells, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain, 2008.
15. A. Mette, New concepts for front side metallization of industrial silicon solar cells, Dissertation, Universität Freiburg, 2007.
16. R.A. Sinton, et al., A quasi-steady-state open-circuit voltage method for solar cell characterization, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, Glasgow, UK, 2000, pp. 1152–1155.