journal article·2011-08

Enhanced performance of a quasi-solid-state dye-sensitized solar cell with aluminum nitride in its gel polymer electrolyte

Kuan-Chieh Huang, Po-Yen Chen, R. Vittal, Kuo-Chuan Ho

Publisher page

Abstract

Abstract The effects of incorporation of aluminum nitride (AlN) in the gel polymer electrolyte (GPE) of a quasi-solid-state dye-sensitized solar cell (DSSC) were studied in terms of performance of the cell. The electrolyte, consisting of lithium iodide (LiI), iodine (I 2 ), and 4-tert-butylpyridine (TBP) in 3-methoxypropionitrile (MPN), was solidified with poly(vinyidene fluoride-co-hexafluoro propylene) (PVDF-HFP). The 0.05, 0.1, 0.3, and 0.5 wt% of AlN were added to the electrolyte for this study. XRD analysis showed a reduction of crystallinity in the polymer PVDF-HFP for all the additions of AlN. The DSSC fabricated with a GPE containing 0.1 wt% AlN showed a short-circuit current density ( J SC ) and power-conversion efficiency ( η ) of 12.92±0.54 mA/cm 2 and 5.27±0.23%, respectively, at 100 mW/cm 2 illumination, in contrast to the corresponding values of 11.52±0.21 mA/cm 2 and 4.75±0.08% for a cell without AlN. The increases both in J SC and in η of the promoted DSSC are attributed to the higher apparent diffusion coefficient of I − in its electrolyte (3.52×10 −6 cm 2 /s), compared to that in the electrolyte without AlN of a DSSC (2.97×10 −6 cm 2 /s). At-rest stability of the quasi-solid-state DSSC with 0.1 wt% of AlN was found to decrease hardly by 5% and 7% at room temperature and at 40 °C, respectively, after 1000 h duration. The DSSC with a liquid electrolyte showed a decrease of about 40% at room temperature, while it virtually lost its performance in about 150 h at 40 °C. Explanations are further substantiated by means of electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and by porosity measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Dye-sensitized solid-state solar cells made from magnesiumoxide-coated nanocrystalline titanium dioxide films: enhancement of the efficiency10.1016/j.jphotochem.2003.11.020 ↗
3. Improved photovoltage and performance by aminosilane-modified PEO/P(VDF-HFP) composite polymer electrolyte dye-sensitized solar cells10.1016/j.electacta.2008.02.097 ↗
4. Novel silane-substituted benzimidazolium iodide as gel electrolyte for dye-sensitized solar cells10.1016/j.electacta.2009.03.006 ↗
5. New efficiency records for stable dye-sensitized solar cells with low-volatility and ionic liquid electrolytes
6. Poly(ethylene oxide)-based polymer electrolyte incorporating room-temperature ionic liquid for lithium batteries10.1016/j.ssi.2007.06.006 ↗
7. The polymer gel electrolyte based on poly(methyl methaacrylate) and its application in quasi-solid-state dye-sensitized solar cells10.1016/j.matchemphys.2008.01.010 ↗
8. A comparative study based on PVDF-HFP and liquid electrolytes, containing imidazolinium ionic liquids of different carbon chain lengths in DSSCs10.1016/j.solmat.2007.03.008 ↗
9. Binary polyethylene oxide/titania solid-state redox electrolyte for highly efficient nanocrystalline TiO2 photoelectrochemical cells10.1021/nl025798u ↗
10. Quasi-solid-state dye-sensitized solar cells employing ternary component polymer-gel electrolytes10.1016/j.jpowsour.2008.02.087 ↗
11. Dye-sensitized solar cells employing a highly conductive and mechanically robust nanocomposite gel electrolyte10.1016/j.synthmet.2004.04.011 ↗
12. Sintering of aluminum nitride: particle size dependence of sintering kinetics10.1007/BF00549842 ↗
13. Production of a grain boundary phase as conducting pathway in insulating AlN ceramics10.1016/j.actamat.2007.07.025 ↗
14. Aluminum nitride deep-ultraviolet light-emitting p–n junction diodes10.1016/j.diamond.2008.02.042 ↗
15. Investigation of sensitizer adsorption and the influence of protons on current and voltage of a dye-sensitized nanocrystalline TiO2 solar cell10.1021/jp022656f ↗
16. The effects of hydrothermal temperature and thickness of TiO2 film on the performance of a dye-sensitized solar cell10.1016/j.solmat.2006.03.012 ↗
17. Performance and stability of TiO2/dye solar cells assembled with flexible electrodes and a polymer electrolyte10.1016/S1010-6030(03)00106-0 ↗
18. Nanofiller incorporated poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) composite electrolytes for lithium batteries10.1016/j.jpowsour.2005.11.055 ↗
19. [0001] Oriented aluminum nitride one-dimensional nanostructures: synthesis, structure evolution, and electrical properties10.1021/nn700363t ↗
20. Gelation of ionic-based electrolytes with silica nanoparticles for quasi-solid-state dye-sensitized solar cells10.1021/ja029294+ ↗
21. Preparation and electrochemical properties of Zn-doped LiNi0.8Co0.2O210.1016/S0378-7753(02)00400-7 ↗
22. Influence of electrical potential distribution, charge transport, and recombination on the photopotential and photocurrent conversion efficiency of dye-sensitized nanocrystalline TiO2 solar cells: a study by electrical impedance and optical modulation techniques10.1021/jp993172v ↗