Accurate opto-electrical modeling of multi-crystalline silicon wafer-based solar cells
Source abstract
Abstract
Modeling of multi-crystalline silicon solar cells has been recently widely used for fast and cost-effective performance improvements. The optimization of device performance requires deep understanding of the opto-electrical losses in a fabricated solar cell. To carry out trustworthy simulations for performance analysis and optimization, the simulation program has to be calibrated to the performance of the fabricated device. In this article an accurate opto-electrical modeling of multi-crystalline silicon solar cells is presented. Specific issues that arose during the calibration process were addressed, such as the optical model describing light scattering due to wafer texturing, the electrical modeling of heavily doped emitter and the opto-electrical modeling of the back surface field. Calibrated model parameters, obtained from theory or measurements, led to an excellent simultaneous matching between simulated and measured reflectance spectrum, internal and external quantum efficiencies and dark and illuminated current–voltage characteristics of the multi-crystalline silicon solar cells. In addition, opto-electrical losses in the investigated solar cells were determined and quantified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Green · 1981
2. Models for numerical device simulations of crystalline silicon solar cells a review10.1007/s10825-011-0367-6 ↗
3. Sze · 2001
4. Determination of the mobility gap of intrinsic mc-Si:H in p–i–n solar cells10.1063/1.3078044 ↗
5. M. Zeman, R. Van Swaaij, E. Schroten, L.L.A. Vosteen, J.W. Metselaar, Device modeling of a-Si:H alloy solar cells: calibration procedure for determination of model input parameters, in: Materials Research Society Symposium Proceedings, vol. 507 1998, pp. 409–414, http://dx.doi.org/10.1557/PROC-507-409.10.1557/PROC-507-409 ↗
6. Optical and electrical modeling of thin-film silicon solar cells10.1557/jmr.2008.0125 ↗
7. Full-wave optoelectrical modeling of optimized flattened light-scattering substrate for high efficiency thin-film silicon solar cells
8. Atlas Silvaco, 〈http://www.silvaco.com/products/device_simulation/atlas.html〉.
9. Sentaurus Synopsys, 〈http://www.synopsys.com/tools/tcad/Pages/default.aspx〉.
10. Diffractive gratings for crystalline silicon solar cells—optimum parameters and loss mechanisms10.1002/pip.1151 ↗
11. MicroTec Siborg Systems Inc, 〈http://www.siborg.com/〉.
12. A self-consistent iterative scheme for one-dimensional steady state transistor calculations. Electron devices10.1109/T-ED.1964.15364 ↗
13. Computer-aided numerical analysis of silicon solar cells10.1016/0038-1101(76)90022-8 ↗
14. Physical operation of back-surface-field silicon solar cells, Electron Devices10.1109/T-ED.1977.18735 ↗
15. Numerical analysis of silicon solar cells
16. K. Girardini, S. Jacobsen, Tech. Rep. N87-22301, NASA, Scientific and Technical Information (STI), 1986.
17. PC-1D, 〈http://www.pv.unsw.edu.au/info-about/our-school/products-services/pc1d〉.
18. P.A. Basore, D.T. Rover, A.W. Smith, PC-1D: Enhanced numerical solar cell modelling, in Proceddings of the Photovoltaic Specialists Conference, Conference Record of the Twentieth IEEE 1, 1988, pp. 389–396, DOI: 10.1109/PVSC.1988.105730.10.1109/PVSC.1988.105730 ↗
19. Numerical modeling of textured silicon solar cells using PC-1D. Electron Devices10.1109/16.46362 ↗
20. Isotextured silicon solar cell analysis and modeling 1: optics10.1109/JPHOTOV.2012.2206569 ↗
21. Isotextured silicon solar cell analysis and modeling 2: recombination and device modeling10.1109/JPHOTOV.2012.2204390 ↗
22. A. Froitzheim, R. Stangl, M. Kriegel, L. Elstner, W. Fuhs, AFORS-HET: a computer-program for the simulation of heterojunction solar cells to be distributed for public use, in: Photovoltaic Energy Conversion, Proceedings of 3rd World Conference on 1 2003, pp. 279–282.
23. Two‐dimensional numerical optimization study of the rear contact geometry of high‐efficiency silicon solar cells10.1063/1.355694 ↗
24. Two-dimensional numerical simulations of high-efficiency silicon solar cells10.1016/0026-2692(95)98930-P ↗
25. 24% efficient silicon solar cells with double layer antireflection coatings and reduced resistance loss10.1063/1.114124 ↗
26. Limiting loss mechanisms in 23% efficient silicon solar cells10.1063/1.358643 ↗
27. PV Lighthouse portal, 〈http://www.pvlighthouse.com.au/〉.
28. J.O. Schumacher, S. Sterk, B. Wagner, W. Warta, Quantum efficiency analysis of high efficiency solar cells with textured surfaces, in: Proceedings of the 13th European Photovoltaic Solar Energy Conference, 1 1995, pp. 96–99, ISBN: 0-9521452-7-8.
29. A.W. Smith, A. Rohatgi, S.C. Neel, Texture: a ray traacing program for the photovoltaic community, Photovoltaic Specialists Conference, in: Conference Record of the Twenty First IEEE 1 (1990), 426–431, http://dx.doi.org/10.1109/PVSC.1990.111660.10.1109/PVSC.1990.111660 ↗
30. R. Brendel, Sunrays: a versatile tray tracing program for the photovoltaic community, in: Proceedings of the 12th European Photovoltaic Solar Energy Conference, 1994, pp. 1339–1342.
31. J.E. Cotter, Raysim 6.0—a free geometrical ray tracing program for silicon solar cells, Photovoltaic Specialists Conference, in: Conference Record of the Thirty First IEEE, 2005, pp. 1165–1168, http://dx.doi.org/10.1109/PVSC.2005.1488345.10.1109/PVSC.2005.1488345 ↗
32. Two- and three-dimensional optical carrier generation determination in crystalline silicon solar cells10.1016/S0927-0248(97)00226-2 ↗
33. H. Holst, P.P. Altermatt, R. Brendel, Daidalos—a plugin based framework for extendable ray tracing, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference, 2010, pp. 2150–2153, http://dx.doi.org/10.4229/25thEUPVSEC2010-2CV.3.24.
34. B. Lipovšek, J. Krč, M. Topič, Design and optimisation of thin-film silicon pv modules with surface-textured front glass by using a combined geometric optics/wave optics model, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference and Exhibition, 2012, 2604–2607, http://dx.doi.org/10.4229/27thEUPVSEC2012-3DV.1.62.
35. Extremely low surface recombination velocities in black silicon passivated by atomic layer deposition10.1063/1.4714546 ↗
36. Optical modeling of a-Si:H solar cells deposited on textured glass/SnO2 substrates10.1063/1.1487910 ↗
37. Numerical modeling of the optical properties of hydrogenated amorphous‐silicon‐based p‐i‐n solar cells deposited on rough transparent conducting oxide substrates10.1063/1.356489 ↗
38. Potential of light trapping in microcrystalline silicon solar cells with textured substrates10.1002/pip.506 ↗
39. ASA simulator, User's manual v5.3, Delft University of Technology, 2012, 〈http://www.pvmd.org/forum/〉.
40. Improved three-dimensional optical model for thin-film silicon solar cells10.1063/1.1784555 ↗
41. A scattering model for surface-textured thin films10.1063/1.3254239 ↗
42. S. Selberherr, Analysis and Simulation of Semiconductor Devices, Springer-Verlag, https://ftp.rush.edu/users/molebio/Bob_Eisenberg/Selberherr%20Chapter.pdf, ISBN 3-211-81800-6, 198410.1007/978-3-7091-8752-4 ↗
43. McIntosh · 2001
44. B. Sopori, National Renewable Energy Laboratory (U.S.), Studies on backside Al-contact formation in Si solar cells: fundamental mechanisms, in: Materials Research Society Symposium Proceedings 1123, 2009, pp. 7–11, http://dx.doi.org/10.1557/PROC-1123-1123-P07-11.10.1557/PROC-1123-1123-P07-11 ↗
45. F. Huster, G. Schubert, ECV doping profile measurements of aluminum alloyed back surface field, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference and Exhibition, 2005, 2DV2.48.
46. Angular resolved scattering measurements of nano-textured substrates in a broad wavelength range10.1088/0957-0233/22/10/105601 ↗
47. Effect of heavy doping on the optical properties and the band structure of silicon10.1103/PhysRevB.29.6739 ↗
48. Low-temperature surface passivation of silicon for solar cells10.1149/1.2096673 ↗
49. Interpretation of recombination at c-Si/SiNx interfaces by surface damage10.1063/1.3437643 ↗
50. Recombination at the interface between silicon and stoichiometric plasma silicon nitride10.1088/0268-1242/17/2/314 ↗
51. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
52. General parameterization of Auger recombination in crystalline silicon10.1063/1.1432476 ↗
53. Auger coefficients for highly doped and highly excited silicon10.1063/1.89694 ↗
54. Improvements in numerical modeling of highly injected crystalline silicon solar cells10.1016/S0927-0248(00)00089-1 ↗
55. Assessment and parameterization of Coulomb-enhanced Auger recombination coefficients in lowly injected crystalline silicon10.1063/1.366360 ↗
56. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
57. Temperature dependence of the radiative recombination coefficient of intrinsic crystalline silicon10.1063/1.1610231 ↗
58. Brendel · 200310.1002/3527603530 ↗
59. P.A. Basore, Extended spectral analysis of internal quantum efficiency, in: Photovoltaic Specialists Conference, Conference Record of the Twenty Third IEEE, 1993, pp. 147–152, http://dx.doi.org/10.1109/PVSC.1993.347063.10.1109/PVSC.1993.347063 ↗
60. F. Huster, Investigation of the alloying process of screen printed aluminum pastes for the BSF formation on silicon solar cells, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference and Exhibition, 2005, 2DV2.49.
61. R. Santbergen, Optical Absorption Factor of Solar Cells for PVT Systems, (PhD thesis), Eindhoven University of Technology, 2008, http://alexandria.tue.nl/extra2/200811936.pdf ISBN: 978-90-386-1467-0.
62. Theory and experiments on the back side reflectance of silicon wafer solar cells10.1002/pip.769 ↗
63. Factors limiting the formation of uniform and thick aluminum–back-surface field and its potential10.1149/1.2129106 ↗
64. Effect of incomplete ionization for the description of highly aluminum-doped silicon10.1063/1.3603043 ↗
65. Numerical modeling of highly doped Si:P emitters based on Fermi–Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
66. P.P. Altermatt, S. Steingrube, Y. Yang, C. Sprodowski, T. Dezhdar, S. Koc, B. Veith, S. Herrman, R. Bock, K. Bothe, J. Schmidt, R. Brendel, Highly predictive modeling of entire Si solar cells for industrial applications, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, 2009, 901–906, http://dx.doi.org/10.4229/24thEUPVSEC2009-2AO.1.1.
67. Formation of aluminum–oxygen complexes in highly aluminum-doped silicon10.1088/0268-1242/25/10/105007 ↗
68. Air Mass 1.5 AM1.5G spectra, 〈http://rredc.nrel.gov/solar/spectra/am1.5/〉.
69. Detailed balance limit of efficiency of pn junction solar cells10.1063/1.1736034 ↗
70. Status of selective emitters for p-Type c-Si solar cells10.4236/opj.2012.22018 ↗
71. T. Dullweber, S. Gatz, H. Hannebauer, T. Falcon, R. Hesse, J. Schmidt, R. Brendel, 19.4% efficient large area rear-passivated screen-printed silicon solar cells, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition, 2011, pp. 811–816, http://dx.doi.org/10.4229/26thEUPVSEC2011-2BP.1.4.