Phase segregations and thickness of the Mo(S,Se)2 layer in Cu2ZnSn(S,Se)4 solar cells at different sulfurization temperatures
Source abstract
Abstract
Abstract The appearance of phase segregations in the kesterite Cu 2 ZnSn(S x ,S 1− x ) 4 (CZTSSe) absorber layer and formation of the interfacial Mo(S,Se) 2 layer during the annealing process is a challenge and limitation for the inderstrization of highly efficiency and low-cost thin film solar cells (TFSCs). These two factors are effectively controlled by sulfurization temperature. In this study, kesterite CZTSSe thin films were successfully prepared via the sulfurization of co-evaporated Cu–Zn–Sn–Se precursor, which was deposited on Mo-coated glass substrates at sulfurization temperatures ranging from 520 °C to 580 °C. The structure and phase of the sulfurized CZTSSe films were characterized by conventional XRD and Raman analyses. The thickness of the Mo(S,Se) 2 layer was estimated based on cross-sectional FE-SEM images. Advanced characterizations, such as STEM images and STEM EDS analyses of the sulfurized CZTSSe films were performed to detect the sulfurization temperature dependent phase segregation and localized fluctuations in the elemental composition of the sulfurized CZTSSe films. The formation of secondary phases was clearly evident at the bottom region in the CZTSSe absorber thin films prepared over sulfurization temperature of 540 °C. The performances of the devices were strongly related to the sulfurization temperature, thickness of the interfacial Mo(S,Se) 2 layer and proportion of secondary phases in the kesterite CZTSSe absorber layers. The highest power conversion efficiency was 5.52% and was achieved by the CZTSSe absorber layer prepared at 540 °C ( V oc :0.575 V, J sc :18.14 mA/cm 2 and FF : 52.94%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗
2. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
3. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
4. Enhancing the performance of CZTSSe solar cells with Ge alloying10.1016/j.solmat.2012.05.039 ↗
5. Cu2ZnSn(S1−xSex)4 based solar cell produced by selenization of vacuum deposited precursors10.1016/j.solmat.2012.02.016 ↗
6. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
7. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
8. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
9. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber
10. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
11. Impact of bulk properties and local secondary phases on the Cu2(Zn,Sn)Se4 solar cells open-circuit voltage10.1016/j.solmat.2014.10.042 ↗
12. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
13. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
14. Chemical insights into the instability of Cu2ZnSnS4 films during annealing,10.1021/cm202379s ↗
15. Rapid annealing of reactively sputtered precursors for Cu2ZnSnS4 solar cells10.1002/pip.2265 ↗
16. On the kinetics of MoSe2 interfacial layer formation in chalcogen-based thin film solar cells with a molybdenum back contact10.1063/1.4794422 ↗
17. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
18. A Temporary Barrier Effect of the Alloy Layer During Selenization: Tailoring the Thickness of MoSe2 for Efficient Cu2ZnSnSe4 Solar Cells10.1002/aenm.201402178 ↗
19. Crystallization behaviour of co-sputtered Cu2ZnSnS4 precursor prepared by sequential sulfurization processes10.1088/0957-4484/24/9/095706 ↗
20. Determination of band gap energy Eg of Cu2ZnSnSe4 thin films: On the discrepancies of reported band gap values10.1063/1.3457172 ↗
21. CuInSe2 (CIS) thin film solar cells by direct coating and selenization of solution precursors10.1021/jp1007363 ↗
22. A facile and low-cost synthesis of promising absorber materials on Cu2ZnSn(Sx,Se1−x)4 nanocrystals consisting of earth abundant elements with tunable band gap characteristics10.1039/c2jm33802e ↗
23. Study on phase formation mechanism of non- and near-stoichiometric Cu2ZnSn(S,Se)4 film prepared by selenization of Cu–Sn–Zn–S precursors10.1021/cm403423e ↗
24. Non-vacuum methods for formation of Cu(In,Ga)(Se,S)2 thin film photovoltaic absorbers10.1002/pip.914 ↗
25. Non-toxic novel route synthesis and characterization of nanocrystalline ZnSxSe1−x thin films with tunable band gap characteristics10.1016/j.materresbull.2014.04.002 ↗
26. Combinatorial ion beam synthesis of CdSxSe1−x nanocrystals10.1016/j.apsusc.2005.05.083 ↗
27. Vibrational spectra of CuIn(Sx,Se2−x) solid solutions10.1134/1.1187049 ↗
28. Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se10.1016/j.cap.2013.06.022 ↗
29. Cu2ZnSn(S,Se)4 kesterite solar cell with 5.1% efficiency using spray pyrolysis of aqueous precursor solution followed by selenization10.1016/j.solmat.2014.01.029 ↗
30. Correlation between soft annealing conditions and structural, microstructural, morphological, and optical properties of CuInS2 thin films prepared by sulfurization of stacked precursor10.1016/j.jcrysgro.2014.02.001 ↗
31. Cu out-diffusion in kesterites—a transmission electron microscopy specimen preparation artifact10.1063/1.4790282 ↗
32. Characterization of defects in 9.7% efficient Cu2ZnSnSe4–CdS–ZnO solar cells10.1063/1.4826448 ↗