journal article·2016-10

Effect of ZnO nanoparticles on the photochemical and electronic stability of P3HT used in polymer solar cells

Anthony Chapel, Sadok Ben Dkhil, Sandrine Therias, Jean.-Luc. Gardette, Driss Hannani, Guillaume Poize, Meriem Gaceur, Syed M. Shah, Pascal Wong-Wah-Chung, Christine Videlot-Ackermann, Olivier Margeat, Agnès Rivaton, Jörg Ackermann

Publisher page

Abstract

ZnO nanoparticles are widely used as electron acceptors in hybrid polymer blend solar cells as well as electron extraction materials in organic solar cells. Here, a study of the photochemical and electronic stability of poly(3-hexyl thiophene)/zinc oxide nanoparticle (P3HT/ZnO) interfaces is presented. Photo stability is compared with device stability of hybrid bulk heterojunction solar cells under light soaking and dark storage. We first investigate the photocatalytic properties of ZnO in P3HT:ZnO blend layers. The results indicated that the photocatalytic activity of ZnO nanoparticles drastically increases the photo oxidation rate of P3HT. Photostability of P3HT:ZnO active layers was significantly improved when irradiation was performed in absence of UV radiations and in absence of oxygen. Using optimal conditions to avoid photodegradation during light soaking still leads to rapid performance losses revealing device degradation is not related to photodegradation of the hybrid polymer blend but to electronic modification during illumination. Importantly, both dark storage in air as well as light soaking experiments show that the stability of interfaces between P3HT and ZnO nanorods is higher than that observed in devices using ZnO nanospheres. This points towards the importance of the shape of the ZnO nano particles for long time stability in polymer solar cells. (C) 2016 Published by Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Life cycle analysis for future photovoltaic systems using hybrid solar cells10.1039/c1ee01766g ↗
2. Solid-state dye-sensitized and bulk heterojunction solar cells using TiO2 and ZnO nanostructures: recent progress and new concepts at the borderline10.1002/pi.3157 ↗
3. Stability of polymer solar cells10.1002/adma.201104187 ↗
4. Stabilising polymer-based bulk heterojunction solar cells via cross-linking10.1002/pi.4712 ↗
5. Improved performance and stability in quantum dot solar cells through band alignment engineering10.1038/nmat3984 ↗
6. Planar heterojunction organometal halide perosvkite solar cells: role of interfacial layers10.1039/C5EE02194D ↗
7. Interface materials for organic solar cells10.1039/b921624c ↗
8. Interface investigation and engineering-achieving high performance polymer solar cells, l10.1039/b925382c ↗
9. Fundamental and technical aspects of the photooxidation of polymers
10. Impact of UV–visible light on the morphological and photochemical behavior of a low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/aenm.201200662 ↗
11. Light-induced degradation of polymer:fullerene photovoltaic devices: an intrinsic or material-dependent failure mechanism?10.1002/aenm.201400848 ↗
12. Light-induced degradation of the P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗
13. How photoinduced crosslinking under operating conditions can reduce PCDTBT-based solar cell efficiency and then stabilize it10.1002/aenm.201301530 ↗
14. Photostability of organic materials used in polymer solar cells10.1002/pi.4656 ↗
15. Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend10.1016/j.solmat.2010.03.012 ↗
16. New insights into the mechanisms of photo-degradation/stabilization of P3HT:PCBM active layers using poly(3-hexyl-d13-thiophene)10.1021/cm402193y ↗
17. Photo- and thermal degradation of MDMO-PPV:PCBM blends10.1016/j.solmat.2006.10.015 ↗
18. Radical polymerization of styrene in the presence of C6010.1002/(SICI)1099-0518(19990801)37:15<2969::AID-POLA30>3.0.CO;2-G ↗
19. Degradation products formed during UV exposure of polyethylene–ZnO nano-composites10.1016/j.polymdegradstab.2010.06.010 ↗
20. Review on zinc oxide nanoparticles: antibacterial activity and toxicity mechanism10.1007/s40820-015-0040-x ↗
21. Photochemical behavior of polylactide/ZnO nanocomposite films10.1021/bm301071w ↗
22. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
23. Interplay of optical, morphological and electronic effects of ZnO optical spacers in highly efficient polymer solar cells
24. Ligand-free synthesis of aluminum-doped zinc oxide nanocrystals and their use as optical spacers in color tuned high-efficient organic solar cells10.1002/adfm.201502929 ↗
25. Effects of ultraviolet soaking on surface electronic structure of solution processed ZnO nanoparticle film in polymer solar cells10.1039/C4TA02695K ↗
26. Photochemical stability of materials for OPV
27. Hybrid heterojunction nanorods for nanoscale controlled morphology in bulk heterojunction solar cells10.1021/jp112369t ↗
28. Oligothiophene self-assembly on the surface of ZnO nanorods: toward coaxial p–n hybrid heterojunctions10.1002/cphc.200900552 ↗
29. Correlation between photoluminescence and oxygen vacancies10.1063/1.116699 ↗
30. Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
31. Socrates · 2001
32. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
33. Degradation products formed during UV exposure of polyethylene–ZnO nano-composites10.1016/j.polymdegradstab.2010.06.010 ↗
34. A study on the photo-degradation of zinc oxide (ZnO) filled polypropylene nanocomposites10.1016/j.polymer.2006.02.089 ↗
35. Influence of the microstructure on the photooxidative degradation of P3HT10.1016/j.polymdegradstab.2011.12.012 ↗
36. Enhanced stability of zinc oxide-based hybrid polymer solar cells by manipulating ultraviolet light distribution in the active layer10.1063/1.3593020 ↗
37. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
38. Interfacial engineering of P3HT/ZnO hybrid solar cells using phthalocyanines: a joint theoretical and experimental investigation
39. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
40. Effect of thermodynamics and curvature on the crystallinity of P3HT thin films on ZnO: insights from atomistic simulations10.1021/jp4109305 ↗