Discharge power dependence of structural, optical and electrical properties of DC sputtered antimony doped tin oxide (ATO) films
Source abstract
Abstract
Abstract Antimony doped tin oxide (ATO) is a transparent conducting oxide (TCO), which has been the focus of intensified study due to its wide range of technological applications and low cost. In the present work ATO films have been prepared by reactive DC magnetron sputtering from a metallic target at different discharge power densities without direct substrate heating. Then a post-deposition annealing at 350 °C in N2 during 20 min was performed. There is a process window for the optimal sputter deposition of ATO with a minimum resistivity of about 3.3×10−3 Ω cm observed in samples deposited at a power density of 1.13 W/cm2. These samples, which present a (2 1 1) preferential orientation, have good electrical conductivity and good transparency in the visible range. Higher values of sputtering discharge power density (1.24 W/cm2) change the preferential orientation to (1 0 1) because of the formation of oxygen vacancy planes. These samples are less conductive and transparent because their layered structure reduces the free charge mobility and allows the formation of Sb in its unusual oxidation state 4+ (between Sb3+ and Sb5+), which produces a sample blue darkening. Higher discharge power densities, above 1.41 W/cm2, produce amorphous samples and an abrupt resistivity increase. The aim of the present work is to go into more depth in the knowledge of ATO in order to develop thin films with optimal electrical and optical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
2. The surface and materials science of tin oxide10.1016/j.progsurf.2005.09.002 ↗
3. Correlated atomic resolution microscopy and spectroscopy studies of Sn(Sb)O2 nanophase catalysts10.1006/jcat.2001.3456 ↗
4. Sb(III) as a surface site for water adsorption on Sn(Sb)O2, and its effect on catalytic activity and sensor behavior10.1021/jp981391v ↗
5. Antimony doping effect on the electrochemical behavior of SnO2 thin film electrodes10.1016/S0378-7753(01)00620-6 ↗
6. Sb-doping effects on optical and electrical parameters of SnO2 films10.1016/S0022-3697(99)00234-6 ↗
7. J. Montero, C. Guillén, J. Herrero, AZO/ATO double-layered transparent conducting electrode: a thermal stability study, Thin Solid Films, in press, doi:10.1016/j.tsf.2010.1012.1103.
8. Surface and bulk properties of sputter deposited undoped and Sb-doped SnO2 thin films10.1016/j.snb.2009.03.067 ↗
9. Thermal stability of Sn doped In2O3 film protected by Sb doped SnO2 film deposited by magnetron sputtering
10. ITO/ATO/TiO2 triple-layered transparent conducting substrates for dye-sensitized solar cells10.1016/j.solmat.2008.02.013 ↗
11. Transparent conducting oxides for photovoltaics10.1557/mrs2007.29 ↗
12. Preparation of reactively sputtered Sb-doped SnO2 thin films: structural, electrical and optical properties10.1016/j.solmat.2009.12.008 ↗
13. Optical and electrical-properties of radio-frequency sputtered tin oxide-films doped with oxygen vacancies, F, Sb, or Mo10.1063/1.357383 ↗
14. Effects of oxygen concentration on the properties of sputtered SnO2:Sb films deposited at low temperature10.1016/j.tsf.2007.05.027 ↗
15. Annealing effects on properties of antimony tin oxide thin films deposited by RF reactive magnetron sputtering10.1016/j.surfcoat.2003.11.004 ↗
16. Low temperature sputter deposition of SnOx:Sb films for transparent conducting oxide applications10.1016/j.surfcoat.2010.09.048 ↗
17. Synthesis and properties of pure and antimony-doped tin dioxide thin films fabricated by sol–gel technique on silicon wafer10.1016/j.matchemphys.2008.10.049 ↗
18. Sb-doped SnO2 transparent conducting oxide from the sol–gel dip-coating technique10.1016/0040-6090(95)06543-1 ↗
19. Electrical and optical properties of tin oxide and antimony doped tin oxide films10.1016/j.optmat.2003.12.006 ↗
20. Studies on the structural and electrical properties of spray deposited SnO2:Sb thin films as a function of substrate temperature10.1016/j.ssc.2004.03.015 ↗
21. Microstructure and electrical properties of Sb–Sn–O thin films10.1016/S0022-3093(97)00142-7 ↗
22. Microstructure and physical properties of nanofaceted antimony doped tin oxide thin films deposited by chemical vapor deposition on different substrates10.1016/j.tsf.2006.11.069 ↗
23. Observation of conduction electrons in Sb-implanted SnO2 by ultraviolet photoemission spectroscopy10.1016/0039-6028(91)90549-8 ↗
24. Transport and sensors properties of nanostructured antimony-doped tin oxide films10.1016/j.tsf.2006.06.025 ↗
25. Preparation and characterization of antimony-doped tin dioxide electrodes. 3. XPS and SIMS characterization10.1021/jp048674+ ↗
26. Unveiling the chemical and morphological features of Sb-SnO2 nanocrystals by the combined use of high-resolution transmission electron microscopy and ab initio surface energy calculations10.1021/ja905896u ↗
27. Recent aspects concerning DC reactive magnetron sputtering of thin films: a review10.1016/S0257-8972(00)00566-1 ↗
28. Origins of coexistence of conductivity and transparency in SnO210.1103/PhysRevLett.88.095501 ↗
29. Structure and stability of a homologous series of tin oxides10.1103/PhysRevLett.100.045702 ↗
30. Possible structures of nonstoichiometric tin oxide: the composition Sn2O310.1088/0965-0393/12/1/004 ↗
31. Transparent conducting Sb-doped SnO2 thin films grown by pulsed-laser deposition10.1063/1.1639515 ↗
32. Tin–antimony oxide catalysts10.1016/S0360-0564(08)60326-0 ↗
33. The effect of dopants valence (plus III and plus V) on the anion/cation uptake properties of antimony-doped tin dioxide10.2478/s11532-010-0112-1 ↗
34. Origins of color in minerals
35. A neutron diffraction investigation of the defect rutile structure of tin–antimony oxide10.1039/DT9810002447 ↗
36. Discharge power dependence of structural and electrical properties of Al-doped ZnO conducting film by magnetron sputtering (for PDP)10.1016/j.vacuum.2008.03.099 ↗
37. Reduced SnO2 surfaces by first-principles calculations10.1063/1.1646460 ↗
38. Effects of oxygen concentration on the properties of sputtered SnO2:Sb films deposited at low temperature10.1016/j.tsf.2007.05.027 ↗
39. Energetics and structure of stoichiometric SnO2 surfaces studied by first-principles calculations10.1016/S0039-6028(00)00612-9 ↗
40. Native defects in oxide semiconductors: a density functional approach10.1088/0953-8984/22/38/384211 ↗
41. Density functional study of oxygen vacancies at the SnO2 surface and subsurface sites10.1103/PhysRevB.77.245410 ↗
42. Tin oxide Sn2O3 which is formed by disproportionation of SnO10.1002/zaac.19733970204 ↗
43. Simple method for determination of optical-constants N,K and thickness of a weakly absorbing thin-film10.1088/0022-3735/9/11/032 ↗
44. Modeling the optical properties of tin oxide thin films10.1016/j.tsf.2009.03.019 ↗
45. Structure–property relationship of nanocrystalline tin dioxide thin films grown on ((1)over-bar012) sapphire10.1063/1.1368866 ↗
46. Difference between bulk and thin film densities of metal oxide and fluoride films studied by NRA depth profiling techniques10.1016/S0168-583X(02)00670-5 ↗
47. Einiger Vertreter Des Rutiltyps—TiO2, SnO2, GeO2 Und MgF210.1107/S0365110X56001388 ↗
48. Spectra and constitution of antimony(III), antimony(V) hexahalide salts and related compounds10.1021/ic50007a006 ↗
49. Mixed valence: origins and developments10.1098/rsta.2007.2135 ↗
50. Surface-properties of antimony doped tin(IV) oxide—a study by electron-spectroscopy10.1016/0039-6028(82)90322-3 ↗
51. Energetic and electronic structure analysis of intrinsic defects in SnO210.1021/jp807753t ↗
52. An ab-initio study of the rôle of lone pairs in the structure and insulator–metal transition in SnO and PbO10.1016/S1293-2558(02)01280-3 ↗
53. Electronic structures of rocksalt, litharge, and herzenbergite SnO by density functional theory10.1103/PhysRevB.70.235114 ↗
54. XPS investigations of surface segregation of doping elements in SnO210.1016/S0169-4332(01)00298-7 ↗
55. Structural studies of nanocrystalline SnO2 doped with antimony: XRD and Mossbauer spectroscopy10.1016/S0022-3697(01)00226-8 ↗
56. Study of surface segregation of antimony on SnO2 surfaces by computer simulation techniques10.1021/jp9905528 ↗
57. X-ray photoelectron-spectra of antimony oxides10.1016/0169-4332(89)90173-6 ↗
58. Transport-properties of highly doped polycrystalline and amorphous SnO2 films10.1103/PhysRevB.31.5335 ↗
59. The interpretation of the properties of indium antimonide10.1088/0370-1301/67/10/306 ↗
60. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
61. Antimony doped whiskers of SnO2 grown from vapor phase10.1016/j.jcrysgro.2009.11.022 ↗
62. Synthesis and characterization of antimony-doped tin oxide (ATO) nanoparticles by a new hydrothermal method10.1016/j.matchemphys.2004.06.004 ↗
63. Influence of elaboration parameters on the properties of tin oxide films obtained by the sol–gel process10.1023/A:1018384205766 ↗
64. Intrinsic limit of electrical properties of transparent conductive oxide films10.1088/0022-3727/33/20/304 ↗
65. Drude's model calculation rule on electrical transport in Sb-doped SnO2 thin films, deposited via sol–gel10.1016/j.jpcs.2006.01.102 ↗
66. Interface effects for metal oxide thin films deposited on another metal oxide II. SnO2 deposited on SiO210.1016/0039-6028(96)00831-X ↗
67. Briggs · 1993