Performance enhancement of inverted polymer solar cells with fullerene ester derivant-modified ZnO film as cathode buffer layer
Source abstract
Abstract
In this paper, we reported that ZnO nanoparticles (NPs) film modified with C60 pyrrolidine tris-acid ethyl ester (PyC60) was used as cathode buffer layer in inverted polymer solar cells. The resultant device with a blend of PTB7:PC71BM as photoactive materials exhibited an open-circuit voltage (Voc) of 0.753 V, a short-circuit current (Jsc) of 16.04 mA cm−2, a fill factor (FF) of 72.5%, and an overall power conversion efficiency (PCE) of 8.76%. It was higher than the control devices based on sole ZnO NPs film or ZnO: PyC60 hybrid film as cathode buffer layer. It was found that the morphology improvement of ZnO/PyC60 film contributed to reducing series loss and interfacial charge recombination. In addition, it improved the interfacial contact with photoactive layer. The results increased electron injection and collection efficiency, and improved FF.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
2. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
3. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
4. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
5. Conjugated polyelectrolyte and zinc oxide stacked structure as an interlayer in highly efficient and stable organic photovoltaic cells10.1039/c3ta10537g ↗
6. Stability of polymer solar cells10.1002/adma.201104187 ↗
7. Recent progress in polymer solar cells: manipulation of polymer: fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
8. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
9. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
10. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived zno film as an electron transport layer10.1002/adma.201004301 ↗
11. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
12. High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer10.1063/1.3028094 ↗
13. Enhanced performance of inverted polymer solar cells by using poly(ethylene oxide)-modified ZnO as an electron transport layer10.1021/am302408w ↗
14. Role of thin n-type metal-oxide interlayers in inverted organic solar cells10.1021/am300549v ↗
15. Gallium-doped zinc oxide films as transparent electrodes for organic solar cell applications10.1063/1.2750410 ↗
16. High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
17. Efficiency and air-stability improvement of flexible inverted polymer solar cells using ZnO/poly(ethylene glycol) hybrids as cathode buffer layers10.1021/am4013038 ↗
18. Increasing the fill factor of inverted P3HT:PCBM solar cells through surface modification of Al-doped ZnO via phosphonic acid-anchored C60 SAMs
19. Combination of indene-C60 bis-adduct and cross-linked fullerene interlayer leading to highly efficient inverted polymer solar cells10.1021/ja108259n ↗
20. Material solubility–photovoltaic performance relationship in the design of novel fullerene derivatives for bulk heterojunction solar cells10.1002/adfm.200801189 ↗
21. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
22. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
23. Functionalized methanofullerenes used as n-type materials in bulk-heterojunction polymer solar cells and in field-effect transistors10.1021/ja710621j ↗
24. Self-organized buffer layers in organic solar cells10.1002/adma.200792876 ↗
25. High performance polymer solar cells with a polar fullerene derivative as the cathode buffer layer10.1039/c3ta12875j ↗
26. Effect of chemical modification of fullerene-based self-assembled monolayers on the performance of inverted polymer solar cells10.1021/am100238e ↗
27. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
28. Interfacial modification to improve inverted polymer solar cells10.1039/b808004f ↗
29. Synthetic, structural, and physical studies of titanium complexes of catechol and 3,5-di-tert-butylcatechol10.1021/ic00176a005 ↗
30. Surface complexation of colloidal semiconductors strongly enhances interfacial electron-transfer rates10.1021/la00060a018 ↗
31. Determination of binding strength for the supramolecular complexation of a designed bisporphyrin with C60, C70 and their derivatives employing absorption spectrophotometric, fluorescence and quantum chemical calculations10.1016/j.saa.2011.05.099 ↗
32. Photophysical investigations on determination of molecular structure and binding strength of supramolecular complexation between fulleropyrrolidine and a designed bisporphyrin in solution10.1016/j.saa.2013.02.002 ↗
33. Self-assembly of ZnO: from nanodots to nanorods10.1002/1521-3773(20020402)41:7<1188::AID-ANIE1188>3.0.CO;2-5 ↗
34. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
35. Performance improvement of inverted polymer solar cells with different top electrodes by introducing a MoO3 buffer layer10.1063/1.3026741 ↗
36. Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes10.1039/b921775d ↗
37. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
38. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells10.1002/adfm.201101915 ↗
39. Enhancement of perovskite-based solar cells employing core–shell metal nanoparticles10.1021/nl4024287 ↗
40. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
41. Kelvin probe force microscopy10.1063/1.105227 ↗
42. Electrical scanning probe microscopy on active organic electronic devices10.1002/adma.200801466 ↗
43. Influence of adsorbed oxygen on the emission properties of nanocrystalline zno particles10.1021/jp993998x ↗
44. The kinetics of the radiative and nonradiative processes in nanocrystalline ZnO particles upon photoexcitation10.1021/jp993327z ↗
45. High-efficiency polymer solar cells enhanced by solvent treatment10.1002/adma.201204306 ↗
46. Metal-oxide interconnection layer for polymer tandem solar cells with an inverted architecture10.1002/adma.201001033 ↗
47. Efficient solution-processed small-molecule solar cells with inverted structure10.1002/adma.201300295 ↗