journal article·2016-10

High efficiency CZTSSe thin film solar cells from pure element solution: A study of additional Sn complement

Jing Guo, Wen-Hui Zhou, Ying-Li Pei, Qing-Wen Tian, Dong-Xing Kou, Zheng-Ji Zhou, Yue-Na Meng, Si-Xin Wu

Publisher page

Abstract

Abstract CZTSSe based thin film solar cells have received considerable interests due to low material cost, suitable band gaps and high absorption coefficient of CZTSSe materials. Achieving high efficiency CZTSSe based thin film solar cells often need a high temperature selenization process that always causes Sn loss in the form of gaseous SnSe 2 . Additional Sn complement may decrease the loss of Sn during selenization process and improve the performance of fabricated CZTSSe based thin film solar cells. Here, we investigate the effect of additional Sn complement on the performance of CZTSSe based thin film solar cells fabricated from pure element solution. XRD and Raman characterizations indicate that additional Sn complement could reduce the secondary phase that may cause the voltage loss and decrease of efficiency. The solar cell fabricated with 15% additional Sn complement shows the best conversion efficiency of 8.71% (V OC =0.42 V, J SC =32.73 mA cm −2 , FF=63.19%). To the best of our knowledge, it is the highest efficiency of CZTSSe based thin film solar cells fabricated from pure element solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Correlation between physical, electrical, and optical properties of Cu2ZnSnSe4 based solar cells10.1063/1.4775366 ↗
2. Y.T. Qu, G. Zoppi, N.S. Beattie, Selenization kinetics in Cu2ZnSn(S,Se)4 solar cells prepared from nanoparticle inks, Sol. Energy Mater. Sol. Cells 2016, http://dx.doi.org/10.1016/j.solmat.2015.12.016.10.1016/j.solmat.2015.12.016 ↗
3. Cu2ZnSn(S,Se)4 solar cells from inks of heterogeneous Cu-Zn-Sn-S nanocrystals10.1016/j.solmat.2014.01.016 ↗
4. Towards environmentally benign approaches for the synthesis of CZTSSe nanocrystals by a hot injection method: a status review10.1039/C4CC03176H ↗
5. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
6. 8% efficient Cu2ZnSn(S,Se)4 solar cells from redox equilibrated simple precursors in DMSO10.1002/aenm.201301823 ↗
7. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol-gel route10.1039/C3TA13533K ↗
8. Cu2ZnSn(S1-xSex)4 thin film solar cells prepared by water-based solution process10.1002/pssr.201308215 ↗
9. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S,Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
10. Effect of Crystallization of Cu2ZnSnSxSe4−x counter electrode on the performance for efficient dye-sensitized solar cells10.1021/am503963b ↗
11. Fabrication of a Cu2ZnSn(S,Se)4 photovoltaic device by a low-toxicity ethanol solution process10.1021/am402558a ↗
12. Metal sulfide precursor aqueous solutions for fabrication of Cu2ZnSn(S,Se)4 thin film solar cells10.1039/C4GC01828A ↗
13. High-efficiency solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells prepared from binary and ternary nanoparticles10.1021/ja3057985 ↗
14. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
15. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
16. Novel non-hydrazine solution processing of earth-abundant Cu2ZnSn(S,Se)4 absorbers for thin-film solar cells10.1039/c3ta10566k ↗
17. 8.6% efficient CZTSSe solar cells sprayed from water-ethanol CZTS colloidal solutions10.1021/jz501864a ↗
18. Fabrication of Cu2ZnSn(S,Se)4 solar cells via an ethanol-based sol-gel route using SnS2 as Sn source10.1021/am5026006 ↗
19. Controlling solid-gas reactions at nanoscale for enhanced thin film morphologies and device performances in solution-processed Cu2ZnSn(S,Se)4 Solar Cells10.1021/jacs.5b05819 ↗
20. Benign solutions and innovative sequential annealing processes for high performance Cu2ZnSn(Se,S)4 photovoltaics10.1002/aenm.201301287 ↗
21. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
22. Fabrication of a Cu2ZnSn(S,Se)4 photovoltaic device by a low-toxicity ethanol solution process10.1021/am402558a ↗
23. Solution-processed highly efficient Cu2ZnSnSe4 thin film solar cells by dissolution of elemental Cu, Zn, Sn, and Se powders10.1021/am5064926 ↗
24. Solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells using elemental Cu, Zn, Sn, S, and Se powders as source10.1186/s11671-015-1045-6 ↗
25. Effect of Sn-layer addition to precursors on characteristics of Cu2ZnSn(S,Se)4 thin-film solar cell absorber10.1016/j.tsf.2013.07.054 ↗
26. Non-toxic ethanol based particulate inks for low temperature processed Cu2ZnSn(S,Se)4 solar cells without S/Se treatment10.1016/j.solmat.2014.06.013 ↗
27. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
28. On the Sn loss from thin films of the material system Cu-Zn-Sn-S in high vacuum10.1063/1.3273495 ↗
29. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
30. Investigation of the solid state reactions by time-resolved X-ray diffraction while crystallizing kesterite Cu2ZnSnSe4 thin films10.1016/j.tsf.2013.01.054 ↗
31. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
32. Efficiency enhancement by adding SnS powder during selenization for Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.solmat.2015.10.037 ↗
33. Predicted formation reactions for the solid-state syntheses of the semiconductor materials Cu2SnX3 and Cu2ZnSnX4 (X=S, Se) starting from binary chalcogenides10.1016/j.tsf.2006.12.096 ↗
34. Interplay between surface preparation and device performance in CZTSSe solar cells: Effects of KCN and NH4OH etching10.1016/j.solmat.2015.01.006 ↗
35. Impact of Sn(S,Se) secondary phases in Cu2ZnSn(S,Se)4 solar cells: a chemical route for their selective removal and absorber Surface passivation10.1021/am502609c ↗
36. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
37. Growth and device characteristics of CZTSSe thin-film solar cells with 8.03% efficiency10.1021/acs.chemmater.5b01181 ↗
38. Formation mechanisms of Cu(In,Ga)Se2 solar cells prepared from electrodeposited precursors10.1016/j.tsf.2012.11.106 ↗
39. Investigation of copper indium gallium selenide material growth by selenization of metallic precursors10.1016/j.jcrysgro.2013.08.009 ↗
40. Defect state and electric transport of the Cu-poor, Cu-rich, and In-rich Cu(In,Ga)Se2 bulk materials10.1016/j.matchemphys.2014.02.019 ↗
41. Electrodeposition of single phase CuInSe2 for solar energy harvesting: Role of different acidic additives10.1016/j.jallcom.2013.12.178 ↗
42. Influence of Cu off-stoichiometry on wide band gap CIGSe solar cells10.1016/j.tsf.2010.12.174 ↗
43. Effects of SnSe2 secondary phases on the efficiency of Cu2ZnSn(Sx,Se1−x)4 based solar cells10.1016/j.tsf.2014.10.058 ↗