journal article·2004-10

Optical constants of sputtered Ni/NiO solar absorber film—depth-profiled characterization

Shuxi Zhao, Carl-Gustaf Ribbing, Ewa Wäckelgård

Publisher page

Abstract

Abstract An optical analysis of a solar absorber with a graded index coating of nickel–nickel oxide deposited in a continuous process for reactive DC magnetron sputtering is reported. The optical constants were determined by a set of 14 samples deposited under the same sputtering conditions as in the continuous process representing the composition at 14 different depths in the continuously graded index coating solar absorber. The optical constants of the 14 layers were derived from optical measurements of reflectance and transmittance in the wavelength range 300–2500 nm. The optical constants were used to construct a model for the graded refractive index in the solar-absorbing coating. It was found that the graded index was not linear in depth profile and hence could be modelled with four layers: two metallic layers in the base closest to the substrate, a dielectric layer at the top of the coating and one intermediate layer representing the change from metallic to dielectric properties in the middle part of the coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Optical Coatings and Gratings · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. B.O. Seraphin, Solar Energy Conversion, 1st Edition, Springer, New York, 1979, pp. 35–55.10.1007/3-540-09224-2 ↗
2. Applications of thin graded-index films to solar absorbers10.1364/AO.16.001438 ↗
3. Mirror coatings for low visible and high infrared reflectance10.1364/JOSA.46.000031 ↗
4. Alternative grading profile for sputtered solar selective surfaces10.1116/1.570351 ↗
5. R.A. Buhrman, Physics of solar selective surfaces, in: K.W. Böer (Ed.), Advances in Solar Energy, Vol. 3, ASES Plenum Press, New York, 1986, pp. 264–276.10.1007/978-1-4613-2227-6_4 ↗
6. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
7. Optical characterization of industrially sputtered nickel–nickel oxide solar selective surface10.1016/S0038-092X(00)00023-2 ↗
8. Industrially sputtered solar absorber surface10.1016/S0927-0248(98)00067-1 ↗
9. S. Zhao, C.-G. Ribbing, E. Wäckelgård, New method to optimize a solar absorber graded film profile, Solar Energy, in press.10.1016/j.solener.2004.06.010 ↗
10. L. Ward, The Optical Constants of Bulk Materials and Films, J.W. Arrowsmith Ltd, Great Britain, 1998, pp.165–169.
11. Determination of optical constants from intensity measurements at normal incidence10.1364/AO.7.000435 ↗
12. Inversion of normal-incidence (R,T) measurements to obtain n+ik for thin film10.1364/AO.25.000562 ↗
13. M. Theiss, Hard and Software for Optical Spectroscopy, Dr.-Bernhard-Klein-Str. 110, D-52078 Aachen, Germany, 2002.
14. N. Tsuda, K. Nasu, A. Yanase, K. Siratori, Electronic Conduction in Oxides, Springer, New York, 1983, pp. 178–179.
15. Lenham · 1966
16. Berechnung verschiedener physikalischer konstanten von heterogenen substanzen10.1002/andp.19354160705 ↗
17. J.H. Weaver, C. Krafka, D.W. Lynch, E.E. Koch, Optical properties of metals, in: Physics Data, Nr.18-1, Fach-informations zentrum, Germany, 1981, pp. 95–108 (nickel), Nr. 18-2, 1981, pp. 65–81(aluminium).10.1364/AO.20.1124_1 ↗
18. C.F. Bohren, D.R. Huffman, Absorption and Scattering of Light by Small Particles, Wiley, USA, 1983, pp. 83–114.