Low-cost multicrystalline back-contact silicon solar cells with screen printed metallization
Source abstract
Abstract
Abstract Adaptation to market requirements is a permanent challenge in industrial solar-cell production. Both increase of cell efficiency as well as lowering costs is demanded. Back-contacted solar cells offer multiple advantages in terms of reducing module assembling costs and enhanced cell efficiency. The investigated emitter-wrap-through (EWT) design [1] has a collecting emitter on front and rear side. These emitter areas are electrically connected by small holes. Due to the double-sided collecting junction, this cell design is favourable for materials with a low-minority charge carrier diffusion length leading to a higher short circuit current density. Untill now most investigations on EWT solar cells were performed on Cz or even FZ silicon. This was justified as long as different processing techniques had to be developed and compared. But as an industrially applicable process sequence has recently been developed [2] , the advantages of the EWT concept compared to conventionally processed cells have to be shown on multicrystalline material. In the following, a manufacturing process of EWT solar cells is presented which is especially adapted to the requirements of multicrystalline silicon. Effective surface texturization was reached by mechanical V-texturization and bulk passivation by a hydrogen plasma treatment. The efficiency of the best solar cells within this process reached 14.2% which is the highest efficiency reported so far for mc-Si 10×10 cm 2 EWT solar cells [3] .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. J.M. Gee, W. Schubert, P. Basore, Emitter wrap-through solar cell, Proceedings of the 23th IEEE PVSC, 1993, p. 265f.10.1109/PVSC.1993.347173 ↗
2. E.V. Kerschaver, S.D. Wolf, J. Szlufcik, Towards back contact silicon solar cells with screen printed metallization. Proceedings of the 28th IEEE PVSC, Anchorage, 2000, p. 209f.10.1109/PVSC.2000.915791 ↗
3. A. Kress, R. Toelle, T. Bruton, P. Fath, E. Bucher, 10×10cm2 screen printed back contact cell with a selective emitter, Proceedings of the 28th IEEE PVSC, Anchorage, 2000, p. 213f.10.1109/PVSC.2000.915792 ↗
4. R. Kühn, A. Boueke, M. Wibral, C. Zechner, P. Fath, G. Willeke, E. Bucher, Investigation of the effect of p/n-junctions bordering on the surface of silicon solar cells. Proceedings of the 2nd WCPSEC, Vienna, 1998, p. 1390f.
5. A. Schönecker, A. Weeber, W. Sinke, C. Zechner, A. Kress, P. Fath, Attacking limiting factors in 10×10cm2 multicrystalline silicon, emitter wrap-through solar cell design and processing, Proceedings of the 2nd WCPSEC, Vienna, 1998, p. 1677f.
6. M. Spiegel, R. Toelle, C. Gerhards, C. Marckmann, N. Nussbaumer, P. Fath, G. Willeke, E. Bucher. Implementation of hydrogen passivation in an industrial low-cost multi-crystalline silicon solar cell process, Proceedings of the 26th IEEE PVSC, Anaheim, 1997, p. 151f.10.1109/PVSC.1997.654051 ↗
7. W. Jooss, K. Blaschek, R. Toelle, T.M. Bruton, P. Fath, E. Bucher, 17% back contact buried contact solar cells, Proceedings of the 16th EC PVSEC, Glasgow. 2000, p. 1124f.
8. D.L. Meier, H.P. Dabis, A. Shibata, T. Abe, K. Kinoshita, C. Bishop, S. Mahajan, A. Rohatgi, P. Doshi, M. Finnegan, Self doping contacts and associated solar cell structures, Proceedings of the 2nd WCPSEC, Vienna, 1998, p. 1491f.
9. J.H. Bultman, A.W. Weeber, M.W. Brieko, J. Hoonstra, J.A. Dijkstra, A.C. Tip, F. M. Schuurmans, Pin up module: a design for higher efficiency, easy module fabrication and attractive appearance, Proceedings of the 16th EC PVSEC, Glasgow, 2000, p. 1210f.
10. A. Kress, P. Fath, G. Willeke, E. Bucher, Low-cost back contact silicon solar cells applying the emitter-wrap through (EWT) concept, Proceedings of the 2nd WCPSEC, Vienna, 1998, p. 1547f.
11. K. Faika, M. Wagner, P. Fath, E. Bucher, Simplification of EWT (emitter-wrap through) solar cell fabrication using Al-P-Codiffusion, Proceedings of the 28th IEEE PVSC, Anchorage, 2000, p. 260f.10.1109/PVSC.2000.915807 ↗
12. C. Gerhards, F. Huster, M. Spiegel, C. Marckmann, P. Fath, G. Willeke, E. Bucher, Progress in machine and tool development towards the implementation of the mechanical texturization in a crystalline Si solar cell production line, Proceedings of the 2nd WCPSEC, Vienna, 1998, p. 1836f.