journal article·2019-06

Influencing mechanism of cationic ratios on efficiency of Cu2ZnSn(S,Se)4 solar cells fabricated with DMF-based solution approach

Hongmei Luan, Bin Yao, Yongfeng Li, Ruijian Liu, Zhanhui Ding, Yingrui Sui, Zhenzhong Zhang, Haifeng Zhao, Ligong Zhang

Publisher page

Abstract

Abstract In the present work, kesterite Cu2ZnSn(S,Se)4 (CZTSSe) films were successfully prepared by tuning the cationic ratios (Zn/Sn and Cu/(Zn+Sn)) with DMF-based solution approach and the effect of cationic ratios on the performance of solar cells with the CZTSSe as absorbers was studied. Our results revealed that the interfacial secondary phases and interfacial structure of CZTSSe/Mo can be optimized by changing the cationic ratios so as to decrease the reverse saturation current (J0) and increase the shunt resistance (Rsh). And the photocurrent (JL) can be improved by broadened depletion region layer (Wd) of the solar cell due to decreased net hole concentration (NB) induced by decreased Cu/(Zn+Sn). By optimizing the cationic ratios, the CZTSSe solar cell with the highest power conversion efficiency (PCE) of 8.01% was obtained at Cu/(Zn+Sn) = 0.75 ± 0.05 and Zn/Sn = 1.18 ± 0.02. The increase of PCE is mainly attributed to the decrease of interfacial secondary phases and the improvement of interfacial structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Device Characteristics of CZTSSe Thin-Film Solar Cells with 12.6% Efficiency10.1002/aenm.201301465 ↗
2. 11.2% Efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
3. Earth-Abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
4. 8% Efficient Cu2ZnSn(S,Se)4 solar cells from redox equilibrated simple precursors in DMSO10.1002/aenm.201301823 ↗
5. Cu2ZnSn(SxSe1−x)4 thin film solar cell with high sulfur content (x approximately 0.4) and low Voc deficit prepared using a postsulfurization process10.1016/j.solmat.2017.09.036 ↗
6. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel route10.1039/C3TA13533K ↗
7. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
8. Kesterite Cu2ZnSn(S,Se)4 solar cells with beyond 8% efficiency by a sol-gel and selenization process10.1021/acsami.5b01151 ↗
9. Fine-tuning the Sn content in CZTSSe thin films to achieve 10.8% solar cell efficiency from spray-deposited water-ethanol-based colloidal inks10.1002/aenm.201501404 ↗
10. Cu2ZnSn(S1-xSex)4 thin film solar cells prepared by water-based solution process10.1002/pssr.201308215 ↗
11. A nontoxic solvent based sol–gel Cu2ZnSnS4 thin film for high efficiency and scalable low-cost photovoltaic cells10.1039/C5TA02833G ↗
12. Kesterite Cu2ZnSnS4 thin film solar cells by a facile DMF-based solution coating process10.1039/C5TC01750E ↗
13. Aqueous-solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells via an improved successive ion-layer-adsorption–reaction sequence10.1021/acsomega.7b00967 ↗
14. Evaluation of different metal salt solutions for the preparation of solar cells with wide-gap Cu2ZnGeSxSe4−x absorbers10.1039/C6RA23068G ↗
15. Germanium alloyed kesterite solar cells with low voltage deficits10.1021/acs.chemmater.5b04806 ↗
16. Cu2ZnSnS4-type thin film solar cells using abundant materials10.1016/j.tsf.2006.12.103 ↗
17. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
18. Tailoring the defects and carrier density for beyond 10% efficient CZTSe thin film solar cells10.1016/j.solmat.2016.09.034 ↗
19. Investigation of the SnS/Cu2ZnSnS4 interfaces in kesterite thin-film solar cells10.1021/acsenergylett.7b00151 ↗
20. Improving the open-circuit voltage of Cu2ZnSnSe4 thin film solar cells via interface passivation10.1002/pip.2864 ↗
21. Impact of Na dynamics at the Cu2ZnSn(S,Se)4/CdS interface during post low temperature treatment of absorbers10.1021/acsami.5b12243 ↗
22. Influencing mechanism of the selenization temperature and time on the power conversion efficiency of Cu2ZnSn(S,Se)4-based solar cells10.1021/acsami.6b05201 ↗
23. Effects of etching on surface structure of Cu2ZnSn(S,Se)4 absorber and performance of solar cell10.1016/j.solener.2018.08.016 ↗
24. Optimization of CdS buffer layer for high-performance Cu2ZnSnSe4 solar cells and the effects of light soaking: elimination of crossover and red kink10.1002/pip.2589 ↗
25. Chemically deposited CdS Buffer/Kesterite Cu2ZnSnS4 Solar Cells: relationship between CdS thickness and device performance10.1021/acsami.7b09266 ↗
26. Significantly enhancing grain growth in Cu2ZnSn(S,Se)4 absorber layers by insetting Sb2S3, CuSbS2, and NaSb5S8 thin films10.1021/cg501589t ↗
27. Cation substitution in earth-abundant kesterite photovoltaic materials10.1002/advs.201700744 ↗
28. Defect engineering in multinary earth-abundant chalcogenide photovoltaic materials10.1002/aenm.201602366 ↗
29. Formation mechanism of secondary phases in Cu2ZnSnS4 growth under different copper content10.1016/j.matlet.2016.09.090 ↗
30. The current status and future prospects of kesterite solar cells: a brief review10.1002/pip.2741 ↗
31. Nelson · 2003
32. Growth of large grain-size Cu2ZnSn(SxSe1-x)4 thin films by annealing precursors sputtered from a single quaternary target for solar cells application10.1016/j.spmi.2017.05.036 ↗
33. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
34. Analysis of illumination-intensity-dependent j–V characteristics of ZnO/CdS/CuGaSe2 single crystal solar cells10.1016/S0927-0248(03)00017-5 ↗
35. Effect of interface recombination on solar cell parameters10.1016/S0927-0248(03)00101-6 ↗
36. Fill factor losses in ZnO/CdS/CuGaSe2 single-crystal solar cells10.1016/j.solmat.2003.07.003 ↗
37. Temperature dependence of Cu2ZnSn(SexS1−x)4 monograin solar cells10.1016/j.solener.2009.09.011 ↗
38. Electronic properties of Cu(In,Ga)Se2 heterojunction solar ce-recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
39. Photovoltaic materials and devices based on the alloyed kesterite absorber (AgxCu1-x)2ZnSnSe410.1002/aenm.201502468 ↗
40. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
41. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
42. Hydrazine-processed Ge-substituted CZTSe solar cells10.1021/cm302881g ↗
43. Impact of Sn(S,Se) secondary phases in Cu2ZnSn(S,Se)4 solar cells: a chemical route for their selective removal and absorber surface passivation10.1021/am502609c ↗
44. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
45. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
46. The effect of Zn excess on kesterite solar cells10.1016/j.solmat.2013.02.015 ↗
47. Prospects and performance limitations for Cu-Zn-Sn-S-Se photovoltaic technology
48. High efficiency CZTSSe thin film solar cells from pure element solution: a study of additional Sn complement10.1016/j.solmat.2016.06.021 ↗
49. Improving the performance of solution-processed Cu2ZnSn(S,Se)4 photovoltaic materials by Cd2+ substitution10.1021/acs.chemmater.6b02111 ↗
50. Optimization of ink-jet printed precursors for Cu2ZnSn(S,Se)4 solar cells10.1016/j.jallcom.2017.12.035 ↗
51. Performance of CZTSSe thin film solar cells fabricated using a sulfo-selenization process: influence of the Cu composition10.1016/j.solener.2017.10.085 ↗
52. Band tail engineering in kesterite Cu2ZnSn(S,Se)4 thin-film solar cells with 11.8% efficiency10.1021/acs.jpclett.8b01433 ↗
53. Impact of sequential annealing step on the performance of Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.spmi.2016.04.025 ↗
54. 10% Efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗