Durability of different selective solar absorber coatings in environments with different corrosivity
Source abstract
Abstract
Abstract The degradation and durability of different selective solar absorbers surfaces in outdoor exposure testing (OET) sites with different atmospheric corrosivity (maritime/industrial and urban atmospheres) were investigated for the optimization of accelerated aging tests to the qualification in terms of durability of selective solar absorber coatings in different environments. Two Outdoor Exposure Testing (OET) sites were constructed, the climate was characterized and the atmospheric corrosivity categories were determined by corrosion rate measurements of standard specimens (carbon steel, zinc, copper and aluminium) during 12 months, according to ISO 9223, ISO 9225 and ISO 9226:2012. Two Physical Vapour Deposition (PVD) coatings (commercially available) and three paint coatings (commercially available) were also exposed in the two OET sites with evaluation of degradation after 1, 2, 4, 6, 9 and 12 months of exposure in terms of optical properties (solar absorptance and thermal emittance), morphology and chemical evaluation (SEM/EDS and XRD). The selective solar absorber surfaces submitted to OET sites for one year were ranked according to their performance in terms of optical properties and corrosion over time. The results obtained show the relevance of outdoor exposure testing sites, namely in places with high corrosivity as in marine and/or industrial areas as a reliable way to verify the corrosion resistance of new materials and products and the evolution of optical properties degradation of absorber surfaces in the presence of high concentration of contaminants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Solar Thermal and Photovoltaic Systems · Wind and Air Flow Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Innovation in flat solar termal collectors: a review of the last ten years experimental results10.1016/j.rser.2015.12.142 ↗
2. Strategic research priorities for solar termal technology, European Technology platform on Renewable Heating and Cooling, 2012. 〈http://www.rhc-platform.org/fileadmin/Publications/Solar_Thermal_SRP_single_page.pdf〉, [Accessed 17 January 2016].
3. ISO 9806:2013 Solar energy – solar thermal collectors – test methods, 2013.
4. Degradation effects of maritime atmosphere on metallic components of solar collectors10.1016/j.solmat.2015.12.011 ↗
5. Mapping atmospheric corrosion in coastal regions: methods and results
6. Durabilidade de coletores solares térmicos: Inspeção e análise de falha em função da corrosividade ambiental
7. 〈http://www.nace.org/uploadedFiles/Publications/ccsupp.pdf〉 [Accessed 15 December 2015].
8. 2004
9. Leygraf · 2000
10. Developments in the synthesis of flat plate solar selective absorber materials via sol–gel methods: a review10.1016/j.rser.2014.04.062 ↗
11. Corrosion protection of Sunselect, a spectrally selective solar absorber coating, by (3-mercaptoprropyl)trimethoxysilane10.1016/j.solmat.2009.05.023 ↗
12. A review on surface control of thermal radiation by paints and coatings for new energy applications10.1016/j.rser.2012.01.046 ↗
13. Rheological and optical properties of solar absorbing paints with POSS-treated pigments10.1016/j.matchemphys.2014.10.031 ↗
14. Nanoparticles Ni electroplating and black paint for solar collector applications10.1016/j.aej.2015.12.029 ↗
15. Performance, durability and sustainability of advanced Windows and solar components for building envelopes. Final Report Task 27 Performance of solar façade components of Solar Heating & Cooling Programme, Sub-task B: Durability. Project B3: Durability and reliability assessment of static solar materials. Operating agent: M. Köhl. Fraunhofer Institute for Solar Energy Systems for PTJ Jülich, Germany, 2007. 〈https://www.iea-shc.org/data/sites/1/publications/task27-b3.pdf〉 [Accessed 17 February 2016].
16. Roberge · 2008
17. The applicability of accelerated life testing for assessment of service life of solar thermal components10.1016/j.solmat.2004.01.046 ↗
18. ISO/TR 16335:2013 Corrosion of metals and alloys – corrosion tests in artificial atmospheres – guidelines for selection of accelerated corrosion test for product qualification, 2013.
19. ISO 9223:2012 Corrosion of metals and alloys – corrosivity of atmospheres – classification, determination and estimation, 2012.
20. ISO 11844-3:2006 Corrosion of metals and alloys – classification of low corrosivity of indoor atmospheres – part 3: measurement of environmental parameters affecting indoor corrosivity, 2006.
21. ISO 22975-3:2014 Solar energy – collector components and materials – part 3: absorber surface durability, 2014.
22. ISO 8565:2011. Metals and alloys – atmospheric corrosion testing – general requirements, 2011.
23. ISO 2810:2004. Paints and varnishes – natural weathering of coatings – exposure and assessment, 2004.
24. ISO 9225:2012 Corrosion of metals and alloys – corrosivity of atmospheres – measurement of environmental parameters affecting corrosivity of atmospheres, 2012.
25. ISO 9226:2012 Corrosion of metals and alloys – corrosivity of atmospheres – determination of corrosion rate of standard specimens for the evaluation of corrosivity, 2012.
26. ISO 8407:2009 Corrosion of metals and alloys – removal of corrosion products from corrosion test specimens, 2009.
27. A figure of merit for selective absorbers in flat plate solar water heaters10.1016/j.solener.2013.10.012 ↗
28. ISO 4624: 2002 Paints and varnishes – pull-off test for adhesion, 2002.
29. L. Mariaca-Rodriguez, E. Almeida, A. de Bósquez, A. Cabezas, J. Fernando-Alvarez, G. Joseph, M. Marrocos, M. Morcillo, J. Peña, M.R Prato, S. Rivero, B. Rosales, G. Salas, J. Uruchurtu-Chavarín, A. Valencia, Marine Atmospheric Corrosion of Reference Metals in Tropical Climates of Latin-America, ASTM STP1399, 2000, p. 15.10.1520/STP13550S ↗
30. Testing of components for solar thermal collectors in respect of saline atmospheres10.1016/j.egypro.2014.02.085 ↗
31. Degradation of selective solar absorber surfaces in solar thermal collectors – an EIS study10.1016/j.solmat.2016.10.015 ↗
32. Corrosion mechanisms for aluminium exposed to the atmosphere10.1149/1.2096869 ↗
33. Studies of long-term weathering of aluminium in the atmosphere10.1016/j.corsci.2007.01.006 ↗
34. Effects of environmental factors on atmospheric corrosion of aluminium and its alloys under constant dew point conditions10.1016/j.corsci.2011.12.038 ↗
35. Long-term prediction of metal corrosion losses in atmosphere using a power-linear function10.1016/j.corsci.2016.04.002 ↗
36. Effect of wet storage staining on subsequent atmospheric corrosion of galvanized iron sheets
37. Study on influence of native oxide and corrosion products on atmospheric corrosion of pure Al10.1016/j.corsci.2013.11.027 ↗