Refractory material based frequency selective emitters/absorbers for high efficiency and thermal stable thermophotovoltaics
Source abstract
Abstract
Abstract Refractory materials based frequency selective emission/absorption is extremely encouraging for various applications, especially the combustion based thermophotovoltaics (TPV) and solar-TPV systems. The frequency selective emitters/absorbers also face the challenges of robust operation at elevated temperatures. Here, we report titanium nitride based thermal stable emitters/absorbers with good selectivity in the near infrared wavelength range. The titanium nitride nanocavitity array provides high emissivity/absorptivity at the desired short wavelength range but suppressed emissivity/absorptivity at the long wavelength range, and this design could be used to obtain high power density of the TPV system. The cut-off wavelength could be adjusted by encapsulating the cavities with different dielectrics. Meanwhile, the encapsulating layer protects the nanocavity structure from deformation at high temperatures. The thermal stability at 1073 K and 1273 K for two hours in Argon was demonstrated for the encapsulated nanocavity structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Quantum Electrodynamics and Casimir Effect · Optical properties and cooling technologies in crystalline materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Three-dimensional self-assembled photonic crystals with high temperature stability for thermal emission modification
2. Refractory plasmonics with titanium nitride: broadband metamaterial absorber10.1002/adma.201401874 ↗
3. Recent developments in high-temperature photonic crystals for energy conversion10.1039/c2ee22731b ↗
4. Heterogenous catalysis mediated by plasmon heating10.1021/nl902711n ↗
5. Plasmon resonant enhancement of carbon monoxide catalysis10.1021/nl9041214 ↗
6. Heat assisted magnetic recording10.1109/JPROC.2008.2004315 ↗
7. Local heating with lithographically fabricated plasmonic titanium nitride nanoparticles10.1021/nl4033457 ↗
8. Toward high-energy-density, high-efficiency, and moderate-temperature chip-scale thermophotovoltaics10.1073/pnas.1301004110 ↗
9. A nanophotonic solar thermophotovoltaic device10.1038/nnano.2013.286 ↗
10. Metallic photonic crystal absorber‐emitter for efficient spectral control in high‐temperature solar thermophotovoltaics10.1002/aenm.201400334 ↗
11. Microscale combustion research for application to micro thermophotovoltaic systems10.1016/S0196-8904(03)00024-4 ↗
12. Thermal performance of micro-combustors with baffles for thermophotovoltaic system10.1016/j.applthermaleng.2013.08.044 ↗
13. The development of a wideband and angle-insensitive metamaterial filter with extraordinary infrared transmission for micro-thermophotovoltaics10.1039/C4TC02892A ↗
14. Development of a high-temperature and high-uniformity micro planar combustor for thermophotovoltaics application10.1016/j.enconman.2015.06.083 ↗
15. Effects of H 2/CO blend ratio on radiated power of micro combustor/emitter10.1016/j.applthermaleng.2015.04.052 ↗
16. Numerical investigation on hydrogen/air non-premixed combustion in a three-dimensional micro combustor10.1016/j.enconman.2016.07.048 ↗
17. Combustion characteristics and performance evaluation of premixed methane/air with Hydrogen addition in a micro planar combustor10.1016/j.ces.2015.03.030 ↗
18. InGaAsSb photovoltaic cells with enhanced open-circuit voltage10.1049/ip-opt:20000500 ↗
19. Quaternary InGaAsSb thermophotovoltaic diodes10.1109/TED.2006.885087 ↗
20. Global optimization of solar thermophotovoltaic systems10.1002/pip.2202 ↗
21. Development and experimental evaluation of a complete solar thermophotovoltaic system10.1002/pip.2201 ↗
22. Detailed balance analysis of solar thermophotovoltaic systems made up of single junction photovoltaic cells and broadband thermal emitters10.1016/j.solmat.2010.06.042 ↗
23. Analysis of entropy generation distribution in micro-combustors with baffles10.1016/j.ijhydene.2014.03.092 ↗
24. Entropy generation analysis of H 2/air premixed flame in micro-combustors with heat recuperation10.1016/j.ces.2013.05.038 ↗
25. Combustion process and entropy generation in a novel microcombustor with a block insert
26. Design and global optimization of high-efficiency thermophotovoltaic systems10.1364/OE.18.00A314 ↗
27. Design of wide-angle solar-selective absorbers using aperiodic metal-dielectric stacks10.1364/OE.17.022800 ↗
28. , Large-area fabrication of high aspect ratio tantalum photonic crystals for high-temperature selective emitters
29. Hafnia-plugged microcavities for thermal stability of selective emitters10.1063/1.4811703 ↗
30. Performance analysis of experimentally viable photonic crystal enhanced thermophotovoltaic systems10.1364/OE.21.0A1035 ↗
31. Solar thermophotovoltaic energy conversion systems with two-dimensional tantalum photonic crystal absorbers and emitters10.1016/j.solmat.2013.12.012 ↗
32. High-temperature stability and selective thermal emission of polycrystalline tantalum photonic crystals10.1364/OE.21.011482 ↗
33. Design of wide-angle selective absorbers/emitters with dielectric filled metallic photonic crystals for energy applications10.1364/OE.22.00A144 ↗
34. Enabling high-temperature nanophotonics for energy applications10.1073/pnas.1120149109 ↗
35. Superlattice photonic crystal as broadband solar absorber for high temperature operation10.1364/OE.22.0A1895 ↗
36. Enabling ideal selective solar absorption with 2D metallic dielectric photonic crystals10.1002/adma.201403302 ↗
37. All-metallic three-dimensional photonic crystals with a large infrared bandgap10.1038/417052a ↗
38. Tailoring self-assembled metallic photonic crystals for modified thermal emission10.1103/PhysRevLett.99.053906 ↗
39. Filling fraction dependent properties of inverse opal metallic photonic crystals10.1002/adma.200602792 ↗
40. Thermophotovoltaic emitters based on a two-dimensional grating/thin-film nanostructure, Int10.1016/j.ijheatmasstransfer.2013.08.047 ↗
41. Stable high temperature metamaterial emitters for thermophotovoltaic applications10.1063/1.4878849 ↗
42. Wavelength-selective and diffuse emitter enhanced by magnetic polaritons for thermophotovoltaics10.1063/1.3684874 ↗
43. Taming the blackbody with infrared metamaterials as selective thermal emitters10.1103/PhysRevLett.107.045901 ↗
44. Heterogeneous metasurface for high temperature selective emission10.1063/1.4893742 ↗
45. Metamaterial electromagnetic wave absorbers
46. Spectra of the selective heat radiation of Yb2O3 under the laser thermal excitation10.1134/S1054660X11040098 ↗
47. Luminescence and selective heat radiation of Yb2O3 upon the resonant and thermal laser excitation10.1134/S1054660X11240029 ↗
48. High efficiency rare-earth emitter for thermophotovoltaic applications10.1063/1.4895932 ↗
49. L. Ferguson, L. Fraas, Matched infrared emitters for use with GaSb TPV cells, 1997, pp. 169–179.10.1063/1.53279 ↗
50. L. Fraas, L. Minkin, J. Avery, H. She, L. Ferguson, F. Dogan, Burner, emitter, and recuperator development for lightweight thermophotovoltaic power supply, in: Proceedings of the Photovoltaic Specialist Conference (PVSC), 2015 IEEE 42nd, pp. 1–6.10.1109/PVSC.2015.7355768 ↗
51. A highly efficient NiO-Doped MgO matched emitter for thermophotovoltaic energy conversion10.1016/S0921-5107(00)00795-9 ↗
52. L. Fraas, J. Avery, L. Minkin, H. Huang, Soda-can sized thermophotovoltaic battery replacement, in: Proceedings of the Photovoltaic Specialists Conference (PVSC), 2011 37th IEEE, pp. 002050–002055.10.1109/PVSC.2011.6186356 ↗
53. Oxides and nitrides as alternative plasmonic materials in the optical range [Invited]10.1364/OME.1.001090 ↗
54. Titanium nitride as a plasmonic material for visible and near-infrared wavelengths10.1364/OME.2.000478 ↗
55. Optical properties and plasmon resonances of titanium nitride nanostructures10.1088/0957-4484/21/11/115201 ↗
56. Significance of Al on the morphological and optical properties of Ti 1− xAlxN thin films10.1016/j.matchemphys.2011.07.083 ↗
57. Alternative plasmonic materials: beyond gold and silver10.1002/adma.201205076 ↗
58. U.S. Geological Survey in Tungsten Statistics and Information, 2015.
59. U.S. Geological Survey in Niobium (Columbium) and Tantalum Statistics and Information, 2015.
60. U.S. Geological Survey in Titanium Statistics and Information, 2015.
61. Chemical vapor deposition of titanium, zirconium, and hafnium nitride thin films10.1021/cm00018a034 ↗
62. Interspecimen comparison of the refractive index of fused silica10.1364/JOSA.55.001205 ↗
63. Refraction and dispersion of synthetic sapphire10.1364/JOSA.52.001377 ↗
64. Refraction index measurements on AlN single crystals10.1002/pssb.19660140127 ↗
65. GaSb photovoltaic cells for applications in TPV generators10.1088/0268-1242/18/5/307 ↗
66. M. Mauk, Z. Shellenbarger, J. Cox, A. Tata, T. Warden, L. Dinetta, R. Mueller, Advances in low-bandgap InAsSbP/InAs and GaInAsSb/GaSb thermophotovoltaics, in: Proceedings of the Photovoltaic Specialists Conference Record of the Twenty-Eighth IEEE, 2000 pp. 1028–1031.10.1109/PVSC.2000.916061 ↗
67. Performance analysis of nitride alternative plasmonic materials for localized surface plasmon applications10.1007/s00340-012-4955-3 ↗
68. Two-dimensional tungsten photonic crystals as selective thermal emitters10.1063/1.2927484 ↗
69. Jackson · 1999
70. Three-dimensional metallo-dielectric selective thermal emitters with high-temperature stability for thermophotovoltaic applications10.1016/j.solmat.2014.11.017 ↗
71. S. Sundari, R. Ramaseshan, F. Jose, S. Dash, A. Tyagi, Temperature Dependence of Dielectric Constants in Titanium Nitride, arXiv preprint arXiv:1308.0470, 2013.
72. Refractive index of several glasses as a function of wavelength and temperature10.1364/JOSA.59.000774 ↗
73. Lumerical, FDTD Solution 8.6.