journal article·2016-08

Cool black roof impacts into the cooling and heating load demand of a residential building in various climates

Mehdi Baneshi, Hiroki Gonome, Shigenao Maruyama

Publisher page

Abstract

Abstract This paper describes the impacts of different cool black paints on cooling and heating load demand of a residential building in different climates. Cool paints with dark appearance and high reflectance in near infrared portion of sunlight are of great interest by the owners of homes to satisfy both desired visual and energy saving aspects. Three copper oxide (CuO) powders, different in pigment size, and a chromium–iron oxide (Cr 2 O 3 –Fe 2 O 3 ) powder, as a commercial cool black pigment, are used to make the black paints. The samples are made on both conventional black and cool white base coats. The spectral reflectance of all samples in solar range (0.3–2.5 µm) and infrared region (2.5–25 µm) is measured. The thermal emittance of the samples is estimated using the spectral reflectance measurement and validated by the measurement of infrared camera. A typical residential single-stage single-family home in three different climates of Iran is considered and the impacts of applying the different black paints on cooling and heating load demand are discussed. The results show that the peak and annual cooling load demand decrease by 0.4–1.4 kW (6–13%) and 405–2202 kWh (6–14%), respectively, depends on the type of pigmented coating and climate conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Urban Heat Island Mitigation · Building Energy and Comfort Optimization · Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Methods of creating solar-reflective nonwhite surfaces and their application to residential roofing materials10.1016/j.solmat.2006.06.062 ↗
2. Solar spectral optical properties of pigments—Part I: model for deriving scattering and absorption coefficients from transmittance and reflectance measurements10.1016/j.solmat.2004.11.012 ↗
3. Solar spectral optical properties of pigments—Part II: survey of common colorants10.1016/j.solmat.2004.11.013 ↗
4. Measured temperature reductions and energy savings from a cool tile roof on a central California home10.1016/j.enbuild.2014.04.024 ↗
5. Optical properties across the solar spectrum and indoor thermal performance of cool white coatings for building energy efficiency10.1016/j.enbuild.2013.03.051 ↗
6. Integration of thermal insulation coating and moving-air-cavity in a cool roof system for attic temperature reduction10.1016/j.enconman.2013.06.024 ↗
7. Temperature reduction in attic and ceiling via insulation of several passive roof designs10.1016/j.enconman.2010.12.044 ↗
8. Design and performance of a novel innovative roofing system for tropical landed houses10.1016/j.enconman.2014.05.101 ↗
9. The methods for creating energy efficient cool gray building coatings—Part I: preparation from white and black pigments10.1016/j.solmat.2014.07.044 ↗
10. NIR-reflecting properties of new paints for energy-efficient buildings10.1016/j.solener.2015.04.004 ↗
11. The optical properties of black coatings and estimated cooling effect and cooling energy savings potential10.4236/jpee.2014.24011 ↗
12. The methods for creating building energy efficient cool black coatings10.1016/j.enbuild.2014.08.022 ↗
13. Impact of using cool paints on energy demand and thermal comfort of a residential building10.1016/j.applthermaleng.2013.12.056 ↗
14. A new approach to optimizing pigmented coatings considering both thermal and aesthetic effects10.1016/j.jqsrt.2008.10.005 ↗
15. The effect of particles size distribution on aesthetic and thermal performances of polydisperse TiO2 pigmented coatings: comparison between numerical and experimental results10.1016/j.jqsrt.2012.02.006 ↗
16. The effects of TiO2 pigmented coatings characteristics on temperature and brightness of a coated black substrate10.1016/j.solener.2011.09.019 ↗
17. Comparison between aesthetic and thermal performances of copper oxide and titanium dioxide nano-particulate coatings10.1016/j.jqsrt.2010.08.032 ↗
18. Control of thermal barrier performance by optimized nanoparticle size and experimental evaluation using a solar simulator10.1016/j.jqsrt.2014.07.025 ↗
19. 〈http://apps1.eere.energy.gov/buildings/energyplus/cfm/weather_data3.cfm/〉.
20. Underwood · 2004
21. Cengel · 2015
22. Wang · 2001
23. Maruyama · 2004