journal article·2012-12

Preparation of novel SiO2 protected Ag thin films with high reflectivity by magnetron sputtering for solar front reflectors

Y.J. Xu, Q.W. Cai, X.X. Yang, Y.Z. Zuo, H. Song, Z.M. Liu, Y.P. Hang

Publisher page

Abstract

Abstract The Essential Macleod Program (EMP) has been used to successfully assist in the design of a SiO2 protected Ag thin film. The film is applied through magnetron sputtering onto a glass substrate for use in a solar front reflector. In the following experiments, Ag films were first deposited on glass substrates using direct current (DC) magnetron sputtering, and then SiO2 films were deposited as a protective layer onto the surface of the Ag films using radio frequency (RF) magnetron sputtering. The reflectivity of the obtained samples was calculated and tested under light wavelengths ranging from 250 to 2500 nm with films of Ag and SiO2 of different thicknesses. The solar reflectivity (SR) and the light reflectivity (LR) of the 130 nm Ag film and the 320 nm SiO2 film were found to be up to 96.66% and 98.84%, respectively, which is almost identical to the calculated results based on the designed model. Additionally, the deposited films exhibited high anti-corrosion properties in harsh abrasion and aging resistance tests. More importantly, the films were proven capable of operating in high-temperature systems by testing under different annealing temperatures. The high performance of the films was attributed primarily to the SiO2 layer, which served as a good means of protection without experiencing serious degradation of reflectivity, demonstrating their potential in applications for solar front reflectors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Optical Coatings and Gratings · solar cell performance optimization · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Solar tower reflector systems: a new approach for high-temperature solar plants10.1016/S0360-3199(97)00059-1 ↗
2. Solar-thermal electric power generation using a system of distributed parabolic trough collectors
3. Prospectives for China's solar thermal power technology development10.1016/j.energy.2009.04.004 ↗
4. Solar electric generating system resource requirements10.1016/0038-092X(79)90164-6 ↗
5. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
6. Technical and economical system comparison of photovoltaic and concentrating solar thermal power systems depending on annual global irradiation10.1016/j.solener.2004.04.011 ↗
7. Which is the best solar thermal collection technology for electricity generation in north-west India? Evaluation of options using the analytical hierarchy process10.1016/j.energy.2010.07.042 ↗
8. Optical durability of candidate solar reflectors10.1115/1.1861926 ↗
9. Development of concentrating collectors for solar thermal systems
10. A facile method for preparing highly conductive and reflective surface-silvered polyimide films10.1016/j.apsusc.2009.05.038 ↗
11. Improved ITO thin films for photovoltaic applications with a thin ZnO layer by sputtering10.1016/j.tsf.2003.11.050 ↗
12. Photoelectrochemical properties of AgInS2 thin films prepared using electrodeposition10.1016/j.solmat.2010.08.030 ↗
13. Improved light absorption in thin-film silicon solar cells by integration of silver nanoparticles10.1016/j.jnoncrysol.2007.09.031 ↗
14. Reflectivity of silver-based and aluminum alloys for solar reflectors10.1016/0038-092X(81)90040-2 ↗
15. The use of thin glass reflectors for solar concentrators10.1016/0165-1633(80)90053-2 ↗
16. Silvered-PMAA reflectors10.1016/0927-0248(94)90207-0 ↗
17. Role of inorganic oxide interlayers in improving the adhesion of sputtered silver film on PMMA10.1163/156856195X00356 ↗
18. Stability of interfaces in solar-energy materials10.1016/0165-1633(81)90071-X ↗
19. Stainless-steel solar mirrors–a material feasibility study10.1016/0165-1633(89)90039-7 ↗
20. Effect of annealing on morphology, optical reflectivity, and stress state of Al-(0.19–0.53)wt% Sc thin films prepared by magnetron sputtering10.1016/j.surfcoat.2010.07.014 ↗
21. Optical performance and durability of solar reflectors protected by an alumina coating10.1016/S0040-6090(97)00198-3 ↗
22. Effect of Cr interlayer on the optical properties and adhesion of Ag films
23. On the characterization of Al-0.11 wt%Sc alloy thin film10.1016/j.tsf.2009.03.179 ↗
24. In situ optical spectroscopy during deposition of Ag:Si3N4 nanocomposite films by magnetron sputtering10.1016/j.tsf.2009.08.005 ↗
25. Characterization of SiO2 and TiO2 films prepared using rf magnetron sputtering and their application to anti-reflection coating10.1016/j.vacuum.2004.06.003 ↗
26. Technique for Optical Imaging of Liquid Crystal Alignment Layers10.1080/10587259808025098 ↗
27. Soft lithographic methods for nano-fabrication10.1039/a700145b ↗
28. Scratch-resistant SiO2 antireflective coatings prepared by dip coating method
29. Optical properties, durability, and system aspects of a new aluminium-polymer-laminated steel reflector for solar concentrators10.1016/j.solmat.2004.01.029 ↗
30. ZnO:Al films prepared by rf magnetron sputtering applied as back reflectors in thin-film silicon solar cells10.1016/j.tsf.2008.05.009 ↗
31. Optical and mechanical properties of a metallic layer
32. Effects of annealing temperature on microstructure and electric properties of Al films