journal article·2012-03Open access

The influence of oxygen in TiAlOxNy on the optical properties of colored solar-absorbing coatings

Dechun Zhu, Fang Mao, Shuxi Zhao

Abstract

Low cost and ease of fabrication are important factors for solar-thermal applications in energy-efficient buildings. This contribution reports the influence of oxygen on structure, optical properties and chromaticity of TiAlO xN y thin films prepared by DC magnetron sputtering. It is an extension of a previous study on colored solar-thermal absorbers based on titanium–aluminum nitride. The purpose is to investigate the possibility of using TiAlO xN y as middle layer to achieve a gradient effect. The results reveal that the structure and optical properties of the TiAlO xN y coatings are sensitive to the oxygen content under certain sputtering conditions. The ratio of oxygen/nitrogen of 0.7:10 is the most appropriate to form the crystalline structure of TiAlON. The optical constants of TiAlN and TiAlON were deduced by fitting the experimental data. It shows that both the refractive index ( n ) and the extinction coefficient ( κ) are decreased when oxygen is introduced to form titanium–aluminum nitro-oxide. The gradient effect can be achieved and controlled by adjusting the ratio of oxygen/nitrogen flow during the process to enhance solar absorptance while keeping the desired color appearance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Chemical and Physical Properties of Materials · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Surfaces for selective absorption of solar energy: an annotated bibliography 1955–8110.1007/BF00540724 ↗
2. Solar energy materials—overview and some examples10.1007/BF00323721 ↗
3. Industrially sputtered solar absorber surface10.1016/S0927-0248(98)00067-1 ↗
4. Chemical vapor deposition of thin semiconductor films for solar energy conversion10.1016/0040-6090(76)90626-X ↗
5. Optical properties and structure of amorphous silicon films prepared by CVD10.1016/0165-1633(79)90053-4 ↗
6. Composite film selective-absorbers
7. Wäckelgård · 2001
8. Corrosion behavior of TiN, TiAlN, TiAlSiN thin films deposited on tool steel in the 3.5wt% NaCl solution10.1016/j.tsf.2007.08.069 ↗
9. Microstructure, oxidation and H2-permeation resistance of TiAlN films deposited by DC magnetron sputtering technique10.1016/j.surfcoat.2003.10.021 ↗
10. Investigation on diffusion barrier properties of reactive sputter deposited TiAlxNyOz thin films for Cu metallization10.1016/S0040-6090(03)01384-1 ↗
11. Structure and optical properties of titanium aluminum nitride films (Ti1−xAlxN)10.1116/1.1359532 ↗
12. Optical constants and film density of TiNxOy solar selective absorbers10.1063/1.358790 ↗
13. Effects of roughness on TiNxOy-Cu selective absorbers10.1117/12.130499 ↗
14. Magnetron sputtered TiAlON composite thin films. II. Optical and electrical properties10.1116/1.577109 ↗
15. Titanium–aluminum-nitride coatings for satellite temperature control10.1016/S0040-6090(00)00914-7 ↗
16. Thermal stability of TiAlN/TiAlON/Si3N4 tandem absorbers prepared by reactive direct current magnetron sputtering10.1116/1.2699425 ↗
17. Chromaticity and optical properties of colored and black solar-thermal absorbing coatings10.1016/j.solmat.2010.05.019 ↗
18. New cermet film structures with much improved selectivity for solar thermal applications10.1063/1.106602 ↗
19. Use of an integrating sphere in solar energy research10.1016/0927-0248(93)90033-Y ↗
20. Determination of optical constants from intensity measurement at normal incidence10.1364/AO.7.000435 ↗
21. Inversion of normal-incidence (R, T) measurements to obtain n+iκ for thin film10.1364/AO.25.000562 ↗
22. A method for determing thickness and optical constants of absorbing thin film10.1016/S0040-6090(02)01068-4 ↗
23. M. Theiss, Hard and software for optical spectroscopy, 2002, Dr. Bernhard-Klein-Str. 110, D-52078 Aachen, Germany.
24. G. Wyszecki, Colorimetry, Walter G. Driscoll (Eds.), Handbook of Optics, Optical Society of American, McGraw-Hill Book Company, New York.
25. Magnetron sputtered TiAlON composite thin films.I. Structure and morphology10.1116/1.577107 ↗
26. Corrosion resistance of TiN/TiAlN-coated ADI by cathodic arc deposition10.1016/j.msea.2005.12.014 ↗
27. Effects of nitrogen partial pressure on electrical properties and thermal stability of TiAlN films by ion beam sputter deposition10.1016/j.surfcoat.2007.05.060 ↗
28. TiAlON black decorative coatings deposited by magnetron sputtering10.1016/0042-207X(90)94225-F ↗
29. Applications of thin graded-index films to solar absorbers10.1364/AO.16.001438 ↗
30. S. Zhao, Spectrally Selective Solar Absorbing Coatings Prepared by DC Magnetron Sputtering, Ph.D. Thesis, Uppsala University, Sweden, 2007, pp. 36–37, ISSN 1651-6214.