Inductively coupled plasma chemical vapour deposited AlOx/SiNy layer stacks for applications in high-efficiency industrial-type silicon solar cells
Source abstract
Abstract
Abstract Passivated emitter and rear cells (PERC) are considered to be the next generation of industrial-type screen-printed silicon solar cells. Deposition methods for rear passivation layers have to meet both the high-throughput and low-cost requirements of the PV industry in combination with high-quality surface passivation properties. In this paper, we evaluate and optimise a novel deposition technique for AlO x passivation layers by applying an inductively coupled plasma (ICP) plasma-enhanced chemical vapour deposition (PECVD) process. The ICP AlO x deposition process enables high deposition rates up to 5 nm/s as well as excellent surface recombination velocities below 10 cm/s after firing. A fixed negative charge of −4×10 12 cm −2 is measured for ICP AlO x single layers with an interface state density of 11.0×10 11 eV −1 cm −2 at midgap position. When applied to PERC solar cells the ICP AlO x layer is capped with a PECVD SiN y layer. We achieve independently confirmed conversion efficiencies of up to 20.1% for large-area (15.6×15.6 cm 2 ) PERC solar cells with screen-printed metal contacts and ICP AlO x /SiN y rear side passivation on standard boron-doped Czochralski-grown silicon wafers. The internal quantum efficiency reveals an effective rear surface recombination velocity S rear of (90±30) cm/s and an internal rear reflectance R b of (91±1)% which demonstrates the excellent rear surface passivation of the ICP AlO x /SiN y layer stack.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. SEMI PV Group 2012, International Technology Roadmap for Photovoltaic (ITRPV.net), Results 2011, 〈http://www.itrpv.net/doc/roadmap_itrpv_2012_full_web.pdf〉, 13 p.
2. High-efficiency rear-passivated screen-printed silicon solar cells
3. Impurity-related limitations of next-generation industrial silicon solar cells10.1109/JPHOTOV.2012.2210030 ↗
4. Schott Solar A.G. Press Release, August 2011, 〈http://www.ffpress.net/Kunde/SOL/PM/12592330/〉.
5. P. Engelhart, D. Manger, B. Klöter, S. Hermann, A.A. Stekolnikov, S. Peters, H.-C. Ploigt, A. Eifler, C. Klenke, A. Mohr, G. Zimmermann, B. Barkenfelt, K. Suva, J. Wendt, T. Kaden, S. Rupp, D. Rychtarik, M. Fischer, J.W. Müller, P. Wawer, Q.ANTUM—Q-cells next generation high-power silicon cell and module concept, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2011, pp. 821–826.
6. Comparison of ICP-AlOx and ALD-Al2O3 layers for the rear surface passivation of c-Si Solar cells10.1016/j.egypro.2012.07.080 ↗
7. K.A. Münzer, J. Schöne, M. Hein, A. Teppe, R.E. Schlosser, M. Hanke, J. Maier, K. Varner, S. Keller, P. Fath, Development and implementation of 19% rear passivation and local contact Centaurus technology, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2011, pp. 2292–2297.
8. Technical performance and industrial implementation in favour of Centaurus technology10.1016/j.egypro.2012.07.121 ↗
9. H.-P. Sperlich, D. Decker, P. Saint-Cast, E. Erben, L. Peters, High productive solar cell passivation on Roth & Rau MAiA® MW-PECVD inline machine—a comparison of Al2O3, SiO2 and SiNx–H process conditions and performance, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference, Valencia, Spain, 2010, 1352–1357.
10. High-rate atomic layer deposition of Al2O3 for the surface passivation of Si solar cells10.1016/j.egypro.2011.06.140 ↗
11. P.G. Vermont, V. Kuznetsov, E.H.A. Granneman, High-throughput solar cell passivation on in-line Levitrack ALD Al2O3 system—demonstration of process performance, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2011, pp. 1644—1647.
12. Low-temperature surface passivation of silicon for solar cells10.1149/1.2096673 ↗
13. Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O310.1063/1.2240736 ↗
14. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge10.1016/j.solmat.2006.04.014 ↗
15. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
16. Surface passivation of high efficiency silicon solar cells by atomic-layer-deposited Al2O310.1002/pip.823 ↗
17. Thermal stability of the Al2O3 passivation on p-type silicon surfaces for solar cell applications10.1002/pssr.200903209 ↗
18. Very low surface recombination velocity on p-type c-Si by high-rate plasma-deposited aluminum oxide10.1063/1.3250157 ↗
19. L.E. Black, K.M. Provancha, K.R. McIntosh, Surface passivation of crystalline silicon by APCVD aluminium oxide, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2011, pp. 1120–1124.
20. Comparison of the thermal stability of single Al2O3 layers and Al2O3/SiNx stacks for the surface passiviation of silicon10.1016/j.egypro.2011.06.141 ↗
21. Plasma-enhanced chemical vapor deposition of aluminum oxide using ultrashort precursor injection pulses10.1002/ppap.201100196 ↗
22. Characterization of plasma in an inductively coupled high-dense plasma source10.1016/0257-8972(95)08258-1 ↗
23. B.F.P. Roos, O. Hohn, T. Dippell, B. Cord, M.R. Huber, P. Binkowska, Singular—a novel static inline PECVD-deposition concept for silicon-cell production, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1665–1668.
24. Spectroscopic studies on preparation of silicon oxide films by PECVD using organosilicon compounds10.1088/0963-0252/5/2/033 ↗
25. Low temperature silicon nitride and silicon dioxide film processing by inductively coupled plasma chemical vapour deposition10.1149/1.1393382 ↗
26. Preparation of a-SiNx thin film with low hydrogen content by inductively coupled plasma enhanced chemical vapor deposition10.1149/1.1838318 ↗
27. A comparative study on inductively-coupled plasma high-density plasma, plasma-enhanced, and low pressure chemical vapor deposition silicon nitride films10.1116/1.582195 ↗
28. B.F.P. Roos, T. Dippell, O. Hohn, P. Wohlfart, B. Beier, B. Veith, M. Siebert, T. Dullweber, ICP-PECVD production tool for industrial AlOx and Si-based passivation layers, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 2012, pp. 1684–1687.
29. B. Vermang, H. Goverde, A. Lorenz, A. Uruena, J. Das, P. Choulat, E. Cornagliotti, A. Rothschild, J. John, J. Poortmans, R. Mertens, On the blistering of Al2O3 passivation layers for Si solar cells, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2011, pp. 1129–1131.
30. On the c-Si surface passivation mechanism by the negative-charge-dielectric Al2O310.1063/1.3021091 ↗
31. Electronic and chemical properties of the c-Si/Al2O3 interface10.1063/1.3587227 ↗
32. J. Benick, A. Richter, T.-T.A. Li, N.E. Grant, K.R. McIntosh, Y. Ren, K.J. Weber, M. Hermle, S.W. Glunz, Effect of a post-deposition anneal on Al2O3/Si interface properties, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, USA, 2010, pp. 891–896.10.1109/PVSC.2010.5614148 ↗
33. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
34. Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells10.1002/pip.1198 ↗
35. 19.4%-efficient large-area fully screen-printed silicon solar cells10.1002/pssr.201105045 ↗
36. Analysis and optimisation of the bulk and rear recombination of screen-printed PERC solar cells10.1016/j.egypro.2012.07.035 ↗
37. Contact formation and recombination at screen-printed local aluminum-alloyed silicon solar cell base contacts10.1109/TED.2011.2161089 ↗
38. H. Hannebauer, T. Falcon, R. Hesse, T. Dullweber, R. Brendel, 18.9%-efficient screen-printed solar cells applying a print-on-print process, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2011, pp. 1607–1610.
39. A. Herguth, G. Schubert, M. Kaes, G. Hahn, Avoiding boron–oxygen related degradation in highly boron doped Cz silicon, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, Germany, 2006, pp. 530–537.
40. Deactivation of the boron–oxygen recombination center in silicon by illumination at elevated temperature10.1002/pssr.200802009 ↗
41. Evaluation of series resistance losses in screen-printed solar cells with local rear contacts
42. T. Dullweber, M. Siebert, B. Veith, C. Kranz, J. Schmidt, R. Brendel, B.F.P. Roos, T. Dippell, A. Schwabedissen, S. Peters, High-efficiency industrial-type PERC solar cells applying ICP AlOx as rear passivation layer, in: Proceedings of the 27th European Photovoltaic Solar Energy Conference, Frankfurt, Germany, 2012, pp. 672–675.