Novel low-cost alkaline texturing process for diamond-wire-sawn industrial monocrystalline silicon wafers
Source abstract
Abstract
Abstract Diamond-wire-sawing (DWS) processes have been developed in recent years to overcome the problems of silicon (Si) waste and low throughput of the conventional multi-wire-slurry-sawing (MWSS) process for cutting Si ingots into wafers. However, DWS is not adopted extensively by PV industry as standard alkaline texturing is not directly applicable to these wafers to generate regular pyramidal structure. In the present work we are reporting a novel low-cost alkaline texturing process for industrial DWS monocrystalline silicon (c-Si) wafers. Our process has three novelties; firstly, it uses a low-cost saw damage removal (SDR) process with a new recipe of potassium hydroxide (KOH), sodium hypochlorite solution at 80 °C for slow Si etching. This process also successfully removes the amorphous Si layer normally present on the as-cut DWC Si wafer surface. Secondly, no initial cleaning process is required before our SDR process. Finally, a high throughput KOH/isopropyl alcohol/potassium silicate texturing process was applied successfully for pyramid formation on the DWS c-Si wafers. Small (~2–4 µm in height) and uniform pyramidal structure with reduced surface reflectance is confirmed by scanning electron microscope, Zeta 3D measurement and UV–Vis spectroscopy studies. Further, photoluminescence (PL) imaging of lifetime samples prepared with the present texturisation process, confirmed the uniformity of surface passivation, a prerequisite for solar cell fabrication. Screen-printed solar cells were fabricated in NCPRE cell fabrication laboratory. For our 6 in. pseudo-square CZ p-type c-Si wafers cell efficiencies up to 18.5% were achieved with the new texturing process. This high throughput novel texturing process thus can easily be integrated into the standard industrial process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Nanowire Synthesis and Applications · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Basic mechanisms and models of multi-wire sawing10.1002/adem.200400578 ↗
2. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
3. Textural development of SiC and diamond wire sawed sc-silicon wafer10.1016/j.egypro.2012.07.072 ↗
4. Growth optimization of multicrystalline silicon10.1016/j.egypro.2011.01.002 ↗
5. Novel texturing process for diamond-wire-sawn single-crystalline silicon solar cell10.1016/j.solmat.2014.11.016 ↗
6. Fixed abrasive diamond wire saw slicing of single- crystal silicon carbide wafers10.1081/AMP-120029960 ↗
7. Etch stop of silicon surface induced by tribo-nanolithography10.1088/0957-4484/16/8/073 ↗
8. Effect of diamond wire saw marks on cell performance10.1016/j.egypro.2016.07.117 ↗
9. Deformation mechanisms of silicon during nanoscratching
10. Indentation-induced phase transformations in silicon: influences of load, rate and indenter angle on the transformation behavior10.1016/j.actamat.2004.12.025 ↗
11. On black solar cells on the tetrahedral texturing of a silicon surface
12. Surface characteristics of (100) silicon anisotropically etched in aqueous KOH10.1149/1.1836644 ↗
13. The surface texturization of solar cells: a new method using V-grooves with controllable sidewall angles10.1016/0927-0248(92)90126-A ↗
14. Texturing of monocrystalline silicon wafers by HF-HCl-H2O2 mixtures: generation of random inverted pyramids and simulation of light trapping in PERC solar cells10.1016/j.solmat.2016.08.034 ↗
15. Improvement on surface texturing of single crystalline silicon for solar cells by saw-damage etching using an acidic solution10.1016/j.solmat.2009.06.012 ↗
16. HF/HNO3 etching of the saw damage10.1016/j.egypro.2013.07.271 ↗
17. Texturing of SiC-slurry and diamond wire sawn silicon wafers by HF–HNO3–H2SO4 mixtures10.1016/j.solmat.2014.04.006 ↗
18. HF-(NH4)2S2O8-HCl mixtures for HNO3- and NOx-free etching of diamond wire- and siC-slurry-sawn silicon wafers: reactivity studies, surface chemistry, and unexpected pyramidal surface morphologies10.1021/acsami.5b01059 ↗
19. Liquid silicate additive for alkaline texturing of mono-Si wafers to improve process bath lifetime and reduce IPA consumption10.1016/j.solmat.2013.01.037 ↗
20. P.K. Basu, S. Kumbhar, K.P. Sreejith, T.S. Yadav, A. Kottantharayil, B.M. Arora, K.L. Narasimhan, A.K. Sharma, High efficiency monocrystalline silicon solar cell fabrication using low-cost processing with small footprint laboratory tools (under review).
21. A cost effective alkaline multicrystalline silicon surface polishing solution with improved smoothness10.1016/j.solmat.2009.05.024 ↗
22. Regulated low cost pre-treatment step for surface texturization of large area industrial single crystalline silicon solar cell10.1016/j.solmat.2010.02.025 ↗
23. Minority carrier lifetime imaging of silicon wafers calibrated by quasi-steady-state photoluminescence10.1016/j.solmat.2010.12.016 ↗