The experimental phase diagram study of the binary polyols system erythritol-xylitol
Source abstract
Abstract
A comprehensive phase diagram for the binary polyols system erythritol-xylitol has been mapped with a transparent characterization approach. Here, the phase equilibrium of the system has been studied experimentally using a combination of methods: Temperature-history (T-history), X-Ray Diffraction (XRD), and Field-Emission Scanning Electron Microscopy (FESEM), and linked to Tammann plots. Existing literature has previously shown the system to be a non-isomorphous type forming a simple eutectic, by combining experimental data with theoretical modelling. The present investigation shows that the system`s phase diagram is a partially isomorphous type forming a eutectic, but not a non-isomorphous type forming a simple eutectic. Here, the eutectic was found within 25–30 mol% erythritol and at 77 °C, which differs from the previous studies identifying the eutectic respectively at 25 or 36 mol% erythritol and at 82 °C. The reasons for the differences are hard to deduce since the research approach is not presented as fully transparent from the past studies. In the present study, only the temperature-composition plot of the first melting (of the two components in a physical mix, but not of a single blend) indicated the shape of a simple eutectic in a non-isomorphous system. The cycles after the first melting in contrast started from the real blend, and displayed eutectic and solid-solid phase changes in T-history. These were verified as forming solid solutions with XRD and FESEM. This eutectic melts at a temperature suitable for low-temperature solar heating, but displayed glass transition, supercooling, and thermally activated degradation, thus affecting its practical aspects as a PCM.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Lignin and Wood Chemistry · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (90)
Show source-provided references
1. Design of a PCM to air heat exchanger using dimensionless analysis: application to electricity peak shaving in buildings10.1016/j.enbuild.2015.03.046 ↗
2. Integration of PCM in domestic hot water tanks: optimization for shifting peak demand10.1016/j.enbuild.2015.05.036 ↗
3. Energy and economic analysis of a building air-conditioner with a phase change material (PCM)10.1016/j.enconman.2015.01.068 ↗
4. Using phase change materials for residential air conditioning peak demand reduction and energy conservation in coastal and transitional climates in the State of California10.1016/j.enbuild.2015.12.012 ↗
5. Storage of thermal energy for effective use of waste heat from industries10.1016/0924-0136(94)01723-E ↗
6. Transportation of energy by utilization of thermal energy storage technology
7. Heat roadmap Europe: combining district heating with heat savings to decarbonise the EU energy system10.1016/j.enpol.2013.10.035 ↗
8. Industrial waste heat utilization for low temperature district heating10.1016/j.enpol.2013.06.104 ↗
9. Enhancing energy recovery in the steel industry: matching continuous charge with off-gas variability smoothing10.1016/j.enconman.2015.05.012 ↗
10. 19 – Thermal energy storage (TES) systems using heat from waste10.1533/9781782420965.4.479 ↗
11. Energy management and CO2 mitigation using phase change materials (PCM) for thermal energy storage (TES) in cold storage and transport10.1016/j.ijrefrig.2014.03.002 ↗
12. Integration of environmental indicators in the optimization of industrial energy management using phase change materials10.1016/j.enconman.2015.05.011 ↗
13. Thermophysical and heat transfer properties of phase change material candidate for waste heat transportation system10.1007/s00231-007-0311-2 ↗
14. A review on transportation of heat energy over long distance: exploratory development10.1016/j.rser.2008.10.004 ↗
15. Waste heat transportation system, using phase change material (PCM) from steelworks to chemical plant10.1016/j.resconrec.2010.02.007 ↗
16. Technology of latent heat storage for high temperature application: a review10.2355/isijinternational.50.1229 ↗
17. Economic assessment of the mobilized thermal energy storage (m-TES) system for distributed heat supply10.1016/j.apenergy.2012.11.010 ↗
18. Identification and characterization of promising phase change materials for solar cooling applications10.1016/j.solmat.2016.10.026 ↗
19. Solar cooling and heating plants: an energy and economic analysis of liquid sensible vs phase change material (PCM) heat storage10.1016/j.ijrefrig.2013.07.022 ↗
20. Phase equilibrium in the design of phase change materials for thermal energy storage: state-of-the-art10.1016/j.rser.2017.01.108 ↗
21. Eutectic mixtures of sugar alcohols for thermal energy storage in the 50–90C temperature range10.1016/j.solmat.2014.11.050 ↗
22. S.N. Gunasekara, J.N. Chiu, V. Martin, Binary phase equilibrium study of the polyols blend erythritol-xylitol with the t-history method for phase change materials design, in: Proceedings of the 13th International Conference on Energy Storage- Greenstock 2015, Beijing, 2015.
23. Infrared thermography method for fast estimation of phase diagrams10.1016/j.tca.2015.12.010 ↗
24. Heat release performance of direct-contact heat exchanger with erythritol as phase change material10.1016/j.applthermaleng.2013.07.024 ↗
25. Preparation and enhanced heat capacity of nano-titania doped erythritol as phase change material10.1016/j.ijheatmasstransfer.2014.09.069 ↗
26. Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles10.1016/j.applthermaleng.2012.05.033 ↗
27. Stability of sugar alcohols as PCM for thermal energy storage10.1016/j.solmat.2014.03.020 ↗
28. Measurement of enthalpy curves of phase change materials via DSC and T-History: when are both methods needed to estimate the behaviour of the bulk material in applications?10.1016/j.tca.2014.09.022 ↗
29. Polyols as phase change materials for surplus thermal energy storage10.1016/j.apenergy.2015.03.064 ↗
30. SAMSSA, Sugar alcohol based material for seasonal storage applications, in: Proceedings of the European Community's 7th Framework Programme, 2013. [Online]. Available: 〈http://samssa.eu/〉. (accessed 09 December 2013), 2013.
31. A eutectic mixture of galactitol and mannitol as a phase change material for latent heat storage10.1016/j.enconman.2015.06.013 ↗
32. Estimation of thermal endurance of multicomponent sugar alcohols as phase change materials10.1016/j.applthermaleng.2014.09.032 ↗
33. New sugar alcohols mixtures for long-term thermal energy storage applications at temperatures between 70°C and 100°C10.1016/j.solmat.2016.06.048 ↗
34. H. Zhang, R.M.J. van Wissen, S.V. Nedea, C.C. Rindt, Characterization of sugar alcohols as seasonal heat storage media – experimental and theoretical investigations, in: Eurotherm Seminar #99- Advances in Thermal Energy Storage, Lleida, 2013.
35. Experimental and in silico characterization of xylitol as seasonal heat storage material10.1016/j.fluid.2016.12.020 ↗
36. Biotechnological production of erythritol and its applications10.1007/s00253-010-2496-4 ↗
37. Water as a plasticizer: physico-chemical aspects of low-moisture polymeric systems
38. Study of the respective binary phase diagrams of sorbitol with mannitol, maltitol and water10.1016/S0040-6031(98)00576-0 ↗
39. Phase and state transition effects on dieelectric, mechanical and thermal properties of polyols10.1016/S0040-6031(01)00664-5 ↗
40. Crystallization and glass properties of pentitols10.1023/A:1025482230325 ↗
41. Zhang · 2017
42. Erythritol: crystal growth from the melt10.1016/j.ijpharm.2009.12.043 ↗
43. The crystal structure of xylitol10.1107/S0567740869006133 ↗
44. Flick · 1998
45. Calorimetric study of the mixtures PE/NPG and PG/NPG10.1016/0165-1633(87)90045-1 ↗
46. Applicability for heat storage of binary systems of neopentylglycol, pentaglycerine and pentaerythrtiol: a comparative analysis10.1016/0165-1633(88)90051-2 ↗
47. Solid state co-crystallization of sugar alcohols measured with differential scanning calorimetry10.1016/0040-6031(95)02539-1 ↗
48. New PCMs prepared from erythritol-polyalcohols mixtures for latent heat storage between 80 and 100⁰C10.1252/jcej.37.1155 ↗
49. Science & technologies for the effective use of unrecovered energy in steelworks
50. M.T. dos Santos, G.A. Le Roux, X. Joulia, V. Gerbaud, Solid-liquid equilibrium modelling and stability tests for triacylglycerols mixtures, in: Proceedings of the 10th International Symposium on Process Systems Engineering - PSE2009?, 2009.10.1016/S1570-7946(09)70368-2 ↗
51. Studies on solid-solid phase transitions of polyols by infrared spectroscopy10.1016/S0040-6031(99)00403-7 ↗
52. Thermodynamic evaluation of several natural polyols- Part III. Heat capacities and thermodynamic properties of erythritol10.1007/s10973-008-9268-8 ↗
53. Enthalpies and entropies of sublimation, vaporization and fusion of nine polyhydric alcohols10.1039/ft9908600075 ↗
54. Thermal behaviour of carbohydrates studied by heat flow calorimetry10.1007/BF02105282 ↗
55. Solid–liquid phase equilibria in binary mixtures of functionalized ionic liquids with sugar alcohols: new experimental data and modelling10.1016/j.fluid.2015.06.002 ↗
56. Thermodynamic investigation of several natural polyols (I): heat capacities and thermodynamic properties of xylitol10.1016/j.tca.2007.02.022 ↗
57. Spaght · 1931
58. On the phase transition in pentaerythritol (II)10.2183/pjab1945.26.10_11 ↗
59. Solid state phase transitions in pentaerythritol and related polyhydric alcohols10.1016/0165-1633(86)90040-7 ↗
60. Roberts · 1998
61. Study on phase diagram of fatty acids mixtures to determine eutectic temperatures and the corresponding mixing proportions10.1016/j.apenergy.2013.10.048 ↗
62. Preparation and properties of shape-stabilized phase change materials based on fatty acid eutectics and cellulose composites for thermal energy storage10.1016/j.energy.2014.11.046 ↗
63. On the solid–liquid equilibrium of binary mixtures of fatty alcohols and fatty acids10.1016/j.fluid.2014.01.004 ↗
64. Deep-eutectic solvents playing multiple roles in the synthesis of polymers and related materials10.1039/c2cs15353j ↗
65. Characterisation of bicontinuous cubic liquid crystalline systems of phytantriol and water using cryo field emission scanning electron microscopy (cryo FESEM)10.1016/j.micron.2006.08.003 ↗
66. The solid-liquid phase diagrams of binary mixtures of even saturated fatty acids differing by six carbon atoms10.1016/j.tca.2009.06.018 ↗
67. The solid–liquid phase diagrams of binary mixtures of consecutive, even saturated fatty acids: differing by four carbon atoms10.1016/j.chemphyslip.2008.09.006 ↗
68. The solid–liquid phase diagrams of binary mixtures of consecutive, even saturated fatty acids10.1016/j.chemphyslip.2009.05.004 ↗
69. Solid–liquid phase equilibrium study of binary mixtures of n-octadecane with capric, and lauric acid as phase change materials (PCMs)10.1016/j.fluid.2014.04.020 ↗
70. (Solid + liquid) phase equilibria and heat capacity of (diphenyl ether + biphenyl) mixtures used as thermal energy storage materials10.1016/j.jct.2014.03.029 ↗
71. Hexadecane (C16H34) +1-hexadecanol (C16H33OH) binary system: crystal structures of the components and experimental phase diagram. Application to thermal protection of liquids10.1021/cm050130c ↗
72. Thermodynamic modeling of binary phase diagram of 2-amino-2-methyl-1,3-propanediol and TRIS(hydroxymethyl)aminomethane system with experimental verification10.1016/j.calphad.2015.05.003 ↗
73. Practical remarks concerning phase diagrams determination on the basis of differential scanning calorimetry measurements10.1007/s10973-013-3097-0 ↗
74. Alfa Aesar, "Alfa Aesar- A Johnson Matthey Company," Alfa Aesar, [Online]. Available: 〈https://www.alfa.com/〉. (accessed 31 October 2014), 2014.
75. Submerged finned heat exchanger latent heat storage design and its experimental verification10.1016/j.apenergy.2011.12.019 ↗
76. Mehling · 2008
77. Conseil International Pour Le Developpement Du Cuivre (CIDEC) · 1968
78. A. Steel Corporation, Product Data Sheet - 316/316L stainless Steel (UNS S31600 AND UNS S31603), 2007. [Online]. Available: 〈http://www.aksteel.com/pdf/markets_products/stainless/austenitic/316_316l_data_sheet.pdf〉. (accessed 22 October 2014).
79. B. Association, Elevated temperature physical properties of stainless steels, British Stainless Steel Association, 2017. [Online]. Available: 〈http://www.bssa.org.uk/topics.php?Article=139〉. (accessed 11 March 2016).
80. M. Ignatowicz, J. Acuña, Å. Melinder, B. Palm, Investigation of ethanol based secondary fluids with denaturing agents and other additives used for borehole heat exchangers, in: Proceedings World Geothermal Congress 2015, Melbourne, 2015.
81. T. Pella, Inc., 208HR High Resolution Sputter Coater- for FESEM Applications, TED Pella, INc- Microscopy Products for Science and industry, 1196–2016. [Online]. Available: 〈http://www.tedpella.com/cressington_html/Cressington-208HR-High-Resolution-Sputter-Coater.htm〉. (accessed 22 March 2016).
82. n-Alkane binary molecular alloys10.1021/cm031169p ↗
83. Crystallization behaviour of fats and lipids—a review10.1016/S0009-2509(00)00458-9 ↗
84. T. Mettler, Application Handbooks from the Technology Leader in Thermal Analysis, [Online]. (accessed 22 January 2016).
85. Lane · 1983 · I
86. Non-covalent derivatives: cocrystals and eutectics10.3390/molecules200814833 ↗
87. Callister · 2007 · 252
88. Crystal structure of i-erythritol and its relationship to soem derived d and l and racemic substances
89. University of Tennessee, Dept. of Materials Science and Engineering · 2001
90. A. Ristić, S. Furbo, C. Moser, H. Schranzhofer, M. Delgado, C. Peñalosa, L. Zalewski, e. a, IEA SHC Task 42/ ECES Annex 29 WG A1: Engineering and processing of PCMs, TCMs and sorption materials, Energy Procedia, vol. 91, no. SHC 2015, in: International Conference on Solar Heating and Cooling for Buildings and Industry, p. 207–217, 2016.